Kenmore 11020702991 compact washer Parts

Kenmore washer model numbers are read left to right: the first 3 digits identify the manufacturer, the middle digits identify the base design, and the final digits show the specific version or feature set. For Kenmore model 11020702991, the 110 prefix is the key manufacturer identifier.

What each section of a Kenmore model number means

Most Kenmore washer model numbers follow this pattern:

• Prefix (first 3 digits): manufacturer code (who built the washer for Kenmore)
• Base model digits (middle group): the core platform or design family
• Suffix digits (last group): production variation such as color, revision level, or feature changes

For model 11020702991, you can think of it like this:

Section	Example from 11020702991	What it tells you
Manufacturer prefix	110	Who built the washer
Base model	20702	Core design family
Version/suffix	991	Specific variation

Why we recommend using the full model number

Parts lookups and diagrams are tied to the complete model number, not just the prefix. Using the full 11020702991 helps ensure you get the correct lid switch, drain pump, coupling, or gear case for your exact Kenmore compact washer.

• Use the full model number when ordering parts
• Match the model number exactly, including all digits
• If your washer has a model tag with additional letters, include those too

Where to find the model number on the washer

Common locations for Kenmore top-load and compact washers include:

• Under the lid near the tub opening
• On the rim of the washer opening
• On the back panel
• Inside the lid area on a sticker or metal tag

Why it matters

Kenmore used multiple manufacturers over the years. The 3-digit prefix helps identify the build platform, and the remaining digits narrow down the exact parts list so you avoid wrong-part returns and repeat repairs.

For model-specific identification details, use the 11020702991 owner’s manual.

Last updated: January 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For your Kenmore compact washer 11020702991, consistent maintenance (proper loading, correct detergent, and quick repairs when symptoms start) is what most often determines whether you land closer to 10 years or 15.

Typical lifespan and what affects it

Most washer life comes down to mechanical wear (drive system, bearings, pump) and how hard the machine is worked.

• Load size and frequency: frequent heavy loads shorten life
• Water quality: hard water can speed up valve and tub buildup
• Drain performance: slow draining strains the pump and can cause odors
• Vibration and balance: repeated out-of-balance spinning wears suspension and drive parts
• Small issues left unfixed: a minor leak or slipping agitation can turn into a major repair

Signs your washer is nearing end of life

If you see several of these at once, repairs can add up quickly.

• Loud grinding or rumbling during spin
• Repeated leaking from the tub area
• Agitation is weak or intermittent
• Won’t spin or drains slowly
• Burning smell or repeated tripped breaker

Quick maintenance that extends washer life

These steps help protect the motor, gear case, and drain system.

Maintenance task	How often	Why it helps
Level the washer and reduce overloads	Anytime vibration starts	Reduces wear on suspension and drive parts
Clean residue and run a hot cleaning cycle	Monthly	Helps prevent odors and buildup
Check hoses for bulges or seepage	Every 6 months	Prevents sudden leaks and water damage
Address slow drain symptoms early	As needed	Protects the drain pump and prevents standing water

For model-specific operating and care guidance, follow the 11020702991 owner’s manual.

Why it matters

A washer that is maintained and repaired early usually reaches the full 10 to 15 year lifespan; ignoring early symptoms often leads to expensive failures in the drive system or draining components.

Last updated: January 2026

To hard reset your Kenmore compact washer model 11020702991, unplug it for 1 minute, then plug it back in and select a new cycle. This clears a stuck control state and restores normal operation for most “won’t start” or “won’t advance” situations.

Hard reset steps (power reset)

• Turn the washer OFF.
• Unplug the power cord from the outlet.
• Wait 60 seconds (use a timer).
• Plug the washer back in.
• Lift and close the lid once, then select a cycle and press Start.
• If the washer has a Pause/Cancel button, press it once to clear the current cycle before starting a new one.

If the reset does not fix it

A reset helps when the control is “confused”, but it will not bypass a failed safety switch or a drain problem.

• If the washer will not start or spin, check the lid switch; a failed switch commonly stops agitation and spin. Consider inspecting or replacing the washer lid switch WP3949238.
• If the washer will not drain, check for a clog at the pump inlet and verify the drain hose is not kinked; a weak or jammed pump can also prevent draining. The matching part is the washer drain pump WP3363394.
• If the motor runs but the tub will not agitate or spin, the motor coupling can be worn or broken. The matching part is the coupling 285753A.
• If the washer fills slowly or not at all, confirm both water supply valves are fully open and the inlet screens are clean.

Quick symptom guide

What it’s doing	Most likely cause	Best next check
Dead, no lights	No power, outlet, cord	Try a known-good outlet, check breaker
Fills but won’t agitate/spin	Lid switch, coupling	Lid switch click/continuity; coupling wear
Won’t drain	Clog, drain hose, pump	Check hose height/kinks; inspect pump
Stops mid-cycle	Lid switch, timer/control	Reset; then check lid switch and timer

Why it matters

A hard reset is the fastest safe first step because it rules out a temporary control glitch before you spend time on deeper troubleshooting or parts replacement.

For model-specific operating steps and cycle-cancel details, use the Kenmore 11020702991 owner’s manual.

Last updated: January 2026

The exact rated capacity for Kenmore model 11020702991 is listed in the specifications section of the 11020702991 owner's manual. This model is a compact washer; compact top-load washers commonly fall in the 1.5 to 2.5 cu. ft. range, but the manual gives the correct value for your unit.

How to find the exact capacity for model 11020702991

Look for capacity listed as “cu. ft.” (cubic feet) or as basket volume in the product specifications.

• Open the 11020702991 owner's manual and go to Specifications or Product data
• Match the model number 11020702991 on your washer’s model/serial tag to the manual listing
• If multiple similar models are covered, use the entry that matches 11020702991 exactly
• Use the manual’s load size guidance (small, medium, large) to avoid overfilling even after you confirm cu. ft.

Typical compact washer capacity range (for context)

This table is general guidance for compact top-load washers; use the manual for the exact rating of 11020702991.

Compact washer capacity (cu. ft.)	Typical loads	What to avoid
1.5 to 1.9	Small mixed loads, towels	Bulky comforters, overpacking
2.0 to 2.5	Medium mixed loads, small blankets	Packing items tightly

Why it matters

Correct loading helps the washer agitate and spin properly, reduces out-of-balance shaking, and helps prevent premature wear on drive and suspension components.

If performance drops when the tub is full

• Weak agitation: check the agitator dog 80040
• No agitation or spin: inspect the coupling 285753A
• Won’t drain well: check the washer drain pump WP3363394

Last updated: January 2026