Kenmore 79046789906 electric range Parts

To reset the Kenmore electric range model 79046789906, we recommend doing a full power reset: turn the range off, shut off power at the breaker for 5 minutes, then restore power and confirm all controls are in OFF. See the 79046789906 installation guide for power-connection and safety notes.

Reset steps (control reset)

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off on the control.
• Switch the range circuit breaker OFF (or remove the range fuse).
• Wait 5 minutes (10 minutes if the display was frozen or showing an error).
• Turn the breaker ON.
• Set the clock and test Bake at 350°F for a few minutes.

If the display comes back but the oven still will not heat

These checks help separate a control glitch from a heating or sensor problem.

• Confirm the range has the correct 240-volt supply (a tripped half-breaker can leave you with 120V and weak or no heat).
• Check for an error code and follow the steps in Kenmore 790 self-cleaning range error codes.
• If baking temperature is inaccurate or the oven shuts off early, the oven temperature sensor is a common cause; see range oven temperature sensor 5304504897.
• If the oven light is out after the reset, inspect the bulb and socket; see appliance light bulb, 40-watt 316538904.

Quick symptom guide

What you see after reset	Most likely issue	What to do next
Display normal, no heat	Power supply, element, sensor	Verify breaker, then test Bake/Broil
Error code returns	Stored fault	Use the error code guide and re-test
Clock resets often	Power interruption	Check outlet/terminal connections

Why it matters

A breaker reset clears many temporary control-board lockups and restores normal operation without replacing parts. If the problem returns immediately, the reset also helps narrow the issue to power, wiring, a sensor, or the electronic control.

Last updated: January 2026

On Kenmore electric range model 79046789906, the model number is printed on the serial plate located on the oven front frame; you’ll typically find it behind the oven door or behind the storage/warming drawer, depending on the exact configuration.

Where to look first (fastest checks)

• Open the oven door and look along the front frame (door jamb area).
• If you don’t see it, pull out the bottom drawer and look on the frame behind it.
• Use a flashlight; the plate is often low and easy to miss.
• Write down the model number and serial number before ordering parts.

What the label looks like

The serial plate is usually a small sticker or metal tag with multiple fields. Look for:

• Model (example: 79046789906)
• Serial
• Sometimes a lot number/letter

Quick location guide

Range style	Most common serial plate location	What to do
Slide-in or freestanding electric range	Oven front frame behind the oven door	Open door; scan the frame edges
Models with a bottom drawer	Behind the drawer on the front frame	Pull drawer out; check the frame

Why it matters

We use the model number to match the correct Kenmore parts and diagrams for your exact electric range. Even small design changes can affect which bake element, surface element, or control parts fit.

For the official placement details and diagrams, check the 79046789906 installation guide.

Last updated: January 2026

Kenmore model 79046789906 uses the 790 prefix, which identifies Frigidaire as the original manufacturer for this Kenmore electric range. Confirm the prefix on the model and serial plate before ordering parts or scheduling service; it prevents mismatched components.

How to confirm the manufacturer on the range

Use the model and serial plate and match the first three digits of the model number.

• Find the model number and verify it starts with 790.
• Record the model number, serial number, and lot number/letter.
• Use those numbers when ordering parts, especially controls, elements, and wiring.
• Keep the information with your paperwork for faster service.

Where to find the model and serial plate

The installation instructions for this model describe common locations for the serial plate; see the installation guide.

Common location	What to do	Why it helps
Oven front frame behind the oven door	Open the oven door and check the front frame	Quickest way to verify the 790 prefix
Behind the drawer (storage or warmer drawer, depending on model)	Pull the drawer out and look on the frame	Alternate location used on many slide-in ranges

Why it matters

Kenmore is a brand name used across multiple manufacturers. The prefix (like 790) points to the OEM, which helps match Frigidaire-built parts and specifications to your 79046789906 range.

Helpful reference if you are diagnosing a fault code

If you are identifying the maker because of an error code, use Kenmore 790 self-cleaning range error codes to narrow down likely causes.

Last updated: January 2026