Kenmore 79092303012 electric range Parts

Kenmore model numbers are structured so the first 3 digits identify the manufacturer behind the Kenmore brand, and the remaining digits narrow down the exact product series and feature variations. For your Kenmore electric range model 79092303012, that 790 prefix is the key identifier.

What each section of a Kenmore model number means

Most Kenmore model numbers break down like this:

• First 3 digits (prefix): manufacturer code (who built it for Kenmore)
• Next digits: base model or series family
• Last digits: version, color, feature package, or production variation

To confirm the exact model number format and where to find it on the appliance, use the 79092303012 owner's manual.

Example breakdown (using your model)

Here is a simple way to read 79092303012:

Section	Example	What it tells you
Manufacturer prefix	790	Who built the range for Kenmore
Model family	92303	The core design/series
Variation	012	Specific configuration details

Why the model number matters for parts

Using the full model number helps us match the correct parts list and diagrams for your exact Kenmore electric range. That matters most when you are ordering items that can vary by revision, such as:

• Surface element control switches
• Oven temperature sensor
• Bake element and broil element
• Control panel and overlay
• Oven door lock motor and switch assembly

Quick tips to avoid ordering the wrong part

• Use the full model number (all digits) when searching parts
• Match the part by name and part ID, not just appearance
• If a part has multiple sizes (like radiant elements), verify diameter and terminals before ordering
• When troubleshooting, check for error codes first; see Kenmore 790 range 4-digit error codes

Last updated: January 2026

For the Kenmore 79092303012 electric range, the exact oven cavity size (capacity in cubic feet) and the exact exterior dimensions need to be taken from the model’s specifications; we use the 79092303012 documentation to confirm the correct measurements for your specific range. Use the 79092303012 owner's manual to match the listed dimensions to your installation space.

What “size” usually means for an electric range

When customers ask for oven size, it typically refers to one of these measurements:

• Oven capacity (cubic feet): how much the oven holds
• Exterior dimensions (inches): width, height, depth of the range
• Cutout/clearance needs: space behind, beside, and above the range for safe operation
• Rack size and usable width: how much room you have for pans and roasters

How to measure your range correctly

If you’re measuring the Kenmore 79092303012 in your kitchen, we recommend:

• Measure width across the front at the widest point (often about 30 inches for many freestanding ranges)
• Measure height from floor to the cooktop surface and to the top of the backguard (if present)
• Measure depth from the back of the range to the front edge (exclude the door handle if you’re checking cabinet fit)
• Measure the oven interior (width, height, depth) with the racks removed for the most usable numbers

Quick reference: common range size expectations

These are typical ranges for many 30-inch class electric ranges (helpful for planning), but the manual specs are the final word.

Measurement	Typical for many electric ranges	What to use for 79092303012
Overall width	~29 7/8 in to 30 in	Specs in the manual
Overall height	~36 in (leveling legs adjust)	Specs in the manual
Overall depth	~25 in to 28 in	Specs in the manual
Oven capacity	~4.8 to 5.4 cu ft	Specs in the manual

Why it matters

Correct sizing prevents installation problems like a range that will not slide fully into place, inadequate clearance for heat, or a mismatch with a power cord and terminal block location.

Last updated: January 2026

For Kenmore electric range model 79092303012, the reliable way to reset the oven control board is a full power reset: turn the range off, shut off the circuit breaker (or unplug the cord), wait 5 minutes, then restore power and set the clock. Use the 79092303012 owner's manual for the exact clock and control steps.

Reset steps (safe, effective)

• Turn all oven and surface controls to OFF.
• Switch the range breaker OFF (or unplug the range).
• Wait 5 minutes (10 minutes if the display was frozen or showing an error).
• Restore power.
• Set the clock and try Bake at 350°F to confirm normal operation.

If the reset does not clear the problem

A power reset clears many temporary glitches, but it will not fix a failed sensor, stuck relay, or keypad issue. These checks help narrow it down:

• If the oven heats erratically or shows temperature-related errors, test the oven temperature sensor and wiring; replace the frigidaire range oven temperature sensor 316490000 if it is out of spec.
• If the display beeps, flashes, or triggers errors during self-clean, inspect the door lock mechanism; a failing lock can keep the control from operating normally.
• If the oven will not heat but the display works, inspect the bake and broil circuits; a failed element is common on electric ranges.

Quick symptom-to-next-step guide

Symptom after reset	Most likely direction	What we do next
Display is blank	Power supply issue	Check breaker, terminal block, cord connections
Heats but temperature is off	Sensor or calibration	Check sensor, then calibration in the manual
Beeping or error returns quickly	Keypad/control issue	Inspect overlay and control connections
Won’t start self-clean	Door lock circuit	Check lock motor/switch and latch alignment

Why it matters

Resetting the control board restores normal logic after a power surge or software lock-up. If the same error returns right away, the control is usually reacting to a real input problem (sensor, door lock, wiring, or heating circuit), so targeted troubleshooting saves time and parts.

Last updated: January 2026

Kenmore model 79092303012 is made by Frigidaire (Electrolux/Frigidaire). Kenmore is the brand on the range, but the 790 model prefix is the key identifier that points to the original manufacturer for this electric range.

How to confirm the manufacturer from the model number

Use the model number tag on the range and focus on the first three digits.

• Find the identification tag (commonly on the oven frame behind the storage drawer, or around the door frame).
• Verify the full model number is 79092303012.
• Use the prefix rule: 790 indicates Frigidaire-built Kenmore ranges.
• Match parts using the full model number to avoid ordering the wrong surface element, bake element, or control part.

What this means when you are buying parts

Even though the badge says Kenmore, many replacement parts and designs align with Frigidaire-built platforms.

What you are doing	What to use	Why it helps
Ordering replacement parts	Full model 79092303012	Ensures correct fit and wiring style
Checking operating features	79092303012 owner's manual	Confirms controls, settings, and care steps
Troubleshooting a display code	Kenmore 790 self-cleaning range error codes	Speeds up diagnosis before replacing parts

Common parts you may see on this Frigidaire-built Kenmore range

These examples are commonly replaced items for heating and control symptoms.

• If a surface burner will not regulate heat: frigidaire range surface element control switch 316436001
• If the oven temperature is inaccurate: frigidaire range oven temperature sensor 316490000
• If the oven will not bake: frigidaire range bake element 316413800

Why it matters

Knowing Frigidaire built Kenmore 79092303012 helps you troubleshoot faster and choose compatible parts (like an oven temperature sensor, bake element, or surface element switch) using the correct design family.

Last updated: January 2026