Installation guide
Owner’s manual
Error Codes
How do I reset my Kenmore electric range?
To reset your Kenmore electric range model 79092903013, turn the range off, then shut off power at the circuit breaker (or remove the fuse) for about 1 minute and restore power. After power returns, reset the clock and any oven settings per the owner's manual.
Quick reset steps (power-cycle reset)
- Turn all surface elements and the oven off.
- Locate the range breaker in your home electrical panel.
- Switch the breaker OFF (or remove the fuse).
- Wait 60 seconds.
- Switch the breaker ON.
- Set the clock and reselect your cooking mode (bake, broil, convection).
What a reset fixes (and what it does not)
A reset clears many temporary control glitches, especially after a power outage. It does not repair failed parts such as a bad sensor, heating element, or control board.
| Symptom after reset | Most likely cause | Common next step |
|---|---|---|
| Display comes back, clock is flashing | Normal after power loss | Set clock in the owner's manual |
| Oven heats incorrectly (too hot or too cool) | Temperature sensing problem | Test/replace frigidaire range oven temperature sensor 316490000 |
| Oven will not heat but broil works (or vice versa) | Failed heating element or wiring | Inspect elements and connections |
| No response from keypad or random beeping continues | Control issue | Check wiring; consider frigidaire range oven control board 316462807 |
Why it matters
Your range can begin operating again when power is restored if it was left on during an outage. Resetting at the breaker helps you start from a known safe state, then you can restore the correct clock and oven function settings.
Parts and help for this model
If the reset does not solve the problem, you can order replacement parts for 79092903013 from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
How to read Kenmore model numbers?
Kenmore model numbers tell you the appliance type and the original manufacturer. For Kenmore electric ranges like model 79092903013, the 790 prefix identifies the manufacturer family; using the full model number (and serial) ensures you get the correct parts and instructions.
Where to find the model and serial number on this range
On Kenmore range model 79092903013, the identification plate is on the lower right oven frame. To see it, open the warming drawer (some models) or storage drawer (some models). Confirm the number matches your paperwork and then use it when ordering parts.
- Open the warming or storage drawer fully
- Look at the lower right side of the oven frame
- Write down the full model number and serial number
- Keep the purchase date with your records
- Use the full model number when searching parts and troubleshooting
How Kenmore model numbers are structured (what the digits mean)
Most Kenmore model numbers follow a pattern: a manufacturer prefix plus a series of digits that identify the design and feature set.
| What you see | What it usually means | Why you should care |
|---|---|---|
| 3-digit prefix (example: 790) | Manufacturer family code | Helps match the correct parts catalog |
| Remaining digits | Model series and feature variations | Affects fit, wiring, and control compatibility |
| Serial number | Production identifier | Useful for service bulletins and exact revisions |
Why it matters for parts and troubleshooting
A single digit difference can change the cooktop element style, oven control, or wiring harness. Using the exact model number helps you avoid ordering the wrong component, especially for electrical parts like an oven sensor or control board.
Parts examples for this model
If you are diagnosing an oven temperature or heating issue, these model-matched parts are commonly involved:
Helpful resources
- Use the owner's manual to confirm the serial plate location, operating features, and “Before you call” troubleshooting.
- For broader model-number searches and ordering by model, use Sears PartsDirect.
Last updated: February 2026
How do I tell how old my Kenmore range is?
To tell how old your Kenmore range model 79092903013 is, we decode the serial number from the model and serial label. Kenmore ranges do not use one universal date code; the date format depends on the model prefix, so the serial number is the key.
Where to find the model and serial label
We use the model and serial label (sometimes called the serial plate) to get the serial number needed for age decoding.
- Check the frame area behind the oven door (around the door opening)
- Check the storage or warming drawer frame (open the drawer and look along the sides)
- Check the back panel of the range
- Write down the full serial number exactly as shown
For label location details specific to this range family, use the owner's manual.
How Kenmore range age decoding works
Kenmore model numbers are often grouped by a 3-digit prefix that indicates the manufacturing source. That prefix determines which serial-number date format to use.
Here is the process we recommend:
- Confirm the model number is 79092903013.
- Identify the prefix (for this model, it starts with 790).
- Use the serial number format tied to that prefix to determine the month and year of manufacture.
Quick reference table
| What you have | What it tells us | What to do next |
|---|---|---|
| Model number (79092903013) | Which decoding rules apply | Use the 790-prefix decoding method |
| Serial number | The actual build date code | Decode to month and year |
| Purchase date | When it was bought (not built) | Use for warranty and ownership records |
Why it matters
Knowing the manufacture date helps us match the right Kenmore electric range parts (like an oven temperature sensor, bake element, or control board) and it also helps when comparing symptoms to typical wear items over time.
Ordering parts once you know the age
After you confirm the model and serial information, you can order replacement parts for 79092903013 from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
