Installation guide
Owner’s manual
Error Codes
What model Kenmore dryer do I have?
If you’re on the Kenmore dryer parts page for model 11079133413, then your dryer model is Kenmore 11079133413. To confirm on the appliance itself, match the full model number from the dryer’s model/serial label to the number shown in the 11079133413 owner's manual.
We typically see the Kenmore dryer model/serial label in one of these spots:
- Inside the dryer door opening (on the cabinet frame)
- On the back panel of the dryer
- Near the lint screen housing (depending on the console and top design)
- On the inside of the front panel (less common)
Kenmore model numbers are usually a long string of digits. For parts lookup, we recommend using the entire model number exactly as printed.
- Use all digits (no spaces)
- Keep leading zeros if they appear
- If there’s a dot (example: 110.XXXX), include it when searching, but the core identifier is still the full model number
| What you see on the label | What it means for parts | What to do |
|---|---|---|
| 11079133413 | Exact match | Use this model number for diagrams and parts |
| 110.79133413 (with a dot) | Same model family format | Enter the full number; include the dot if the search asks |
| A different 110xxxxxxxx | Same Kenmore prefix, different model | Use the exact label number, not the series |
The model number controls which parts fit your exact gas dryer configuration (door style, drum size, burner setup, and control type). Using the exact model number helps avoid ordering the wrong belt, thermal fuse, or gas ignition parts.
Last updated: February 2026
What is the average lifespan of 11079133413?
A Kenmore gas dryer like model 11079133413 typically lasts 13 years with normal household use. Regular lint cleaning, proper venting, and replacing wear parts (belt, rollers, thermal fuse) on time are the biggest factors in reaching that lifespan.
- Airflow and venting: restricted vents overheat the dryer and shorten component life.
- Load size: chronic overloading strains the motor, belt, and drum support system.
- Heat system health: weak ignition or cycling heat increases run time and wear.
- Maintenance: lint buildup raises temperatures and can blow safety fuses.
- Timely wear-part replacement: prevents secondary damage (for example, a seized roller can damage the belt).
- Clean the lint screen every load; replace a damaged screen such as dryer lint screen (white) W10859086.
- Inspect and clean the exhaust duct periodically; keep the run short and free of kinks.
- If you hear thumping or squealing, plan to service drum support parts like dryer drum support roller WPW10314173 and the idler.
- If the dryer runs but won’t heat consistently, test the gas-heat components and safety devices.
| Symptom | Most common cause | Typical fix |
|---|---|---|
| Loud rumble/thump | Worn rollers or blower wheel | Replace rollers, inspect blower |
| Squeal | Idler pulley wear | Replace idler pulley |
| No heat | Ignition or gas valve coil issue | Test igniter and coils |
| Stops mid-cycle | Overheat, blown fuse | Restore airflow, replace fuse |
A dryer that is overheating or running longer than normal wears out faster and can repeatedly trip safety parts like the thermal fuse. Following the maintenance steps in the 11079133413 owner’s manual helps keep drying times normal and extends the life of the motor, burner, and controls.
Last updated: March 2026
What replacement parts are most commonly needed for the 11079133413?
For Kenmore gas dryer model 11079133413, the most commonly replaced parts are wear items (belt, rollers, idler) and heat-safety/ignition parts (thermal fuse, gas valve coils, igniter). These parts address the most frequent complaints: noise, no-heat, and no-start.
- Belt-4 rib, W10849499: drum won’t tumble, burning rubber smell, drum turns by hand too easily.
- Dryer drum support roller WPW10314173: thumping, rumbling, flat spots, drum drag.
- Dryer idler pulley W10837240: squealing, belt slipping, intermittent tumbling.
- Thermal fuse W10909685: dryer won’t start or stops; often caused by restricted venting.
- Dryer valve coil kit 279834: heats at first then quits heating, or intermittent heat.
- Igniter 279311: no heat; burner never lights.
If you’re opening the cabinet for a belt or noise issue, many customers replace multiple wear parts together to avoid repeat tear-down.
| Repair goal | Parts that commonly go together |
|---|---|
| Restore tumbling | Belt + idler pulley |
| Stop thumping/rumble | Rollers (and inspect shafts, blower wheel) |
| Full refresh | Dryer repair kit 4392065 (common wear items in one kit) |
- No start: check door closure and airflow-related overheating; test the thermal fuse first.
- Runs but no heat: focus on igniter, radiant sensor, and gas valve coils.
- Long dry times: fix venting first, then check blower wheel and thermostats.
- Squeal or thump: rollers and idler are the top suspects.
Replacing the correct part the first time prevents repeat failures. For example, a blown thermal fuse often returns if the vent is still restricted. Use the wiring diagram and troubleshooting steps in the 11079133413 installation guide to confirm what to test before ordering.
Last updated: March 2026
