Kenmore Elite 10646023801 refrigerator Parts

For Kenmore Elite refrigerator model 10646023801, the installation guide shows a cabinet width of about 36 in (91.5 cm) and a front width of about 35 11/16 in (90.6 cm). Height and depth vary by the exact size configuration; confirm your exact cutout using the installation guide.

Use these as planning numbers for fit, door swing, and hookups:

• Cabinet width: 36 in (91.5 cm)
• Front width: 35 11/16 in (90.6 cm)
• Height: commonly listed as about 68 3/4 to 71 3/4 in (varies by configuration)
• Depth (typical): about 30 1/8 in max (varies by configuration)
• Door swing clearance: plan for doors to open to at least 150°

The guide notes that height measurements are shown with the leveling legs set to a minimum extension; if the leveling legs are extended further (up to about 1 in below the refrigerator), the overall height increases slightly. That is why we recommend checking the exact configuration in the installation guide before you commit to a tight opening.

• Leave room behind the unit for the power cord and water line.
• Follow the side-wall clearance guidance so the freezer and refrigerator doors can open fully.
• If you are trying to fit flush with base cabinets, plan for trim or baseboard interference.
• If you are also replacing the filter while moving the unit, match the correct cartridge; this model commonly uses the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026

A Kenmore Elite refrigerator typically lasts 10 to 15 years. With consistent maintenance (especially keeping airflow clear and seals tight), many units reach the high end of that range; major sealed-system or compressor repairs are the most common life-limiting events.

Most full-size refrigerators fall into a predictable lifespan range, and your Kenmore Elite 10646023801 is no exception.

• 10 to 15 years is the normal expectation for a side-by-side refrigerator
• Heat and dust shorten life by making the compressor work harder
• Door gasket leaks add run time and wear
• Defrost system problems can cause icing and poor cooling
• Water/ice system issues (clogs, leaks) can create secondary damage if ignored

We recommend these habits because they reduce compressor run time and prevent common failures.

• Clean the condenser area regularly (dust buildup is a top cause of overheating)
• Keep door gaskets clean and ensure doors close fully
• Maintain proper temperatures: 37°F fresh food, 0°F freezer
• Replace the water filter on schedule to protect flow and taste
• Avoid overpacking; blocked vents reduce airflow and cooling performance

If performance drops, these are frequent “wear and tear” areas on side-by-side refrigerators.

• Genuine Kenmore refrigerator water filter EDR3RXD1 (water taste/flow, ice maker fill issues)
• Refrigerator defrost bi-metal thermostat WPW10225581 (frost buildup, warm freezer)
• Refrigerator evaporator fan blade WP2169142 (weak airflow, warm sections)
• Refrigerator electronic control W11629974 (temperature control problems)

Knowing the typical lifespan helps you decide when to maintain versus repair. If your 10646023801 is approaching the 10 to 15 year mark and you are seeing cooling instability, frost buildup, or loud running, targeted maintenance and diagnosis can prevent a small issue from becoming a major sealed-system repair.

For model-specific care, cleaning, and operating guidance, use the 10646023801 owner's manual.

Last updated: January 2026

For your Kenmore Elite refrigerator model 10646023801, the complete model number and serial number are printed on the model and serial number label inside the fresh food (refrigerator) compartment. Open the refrigerator door and look on the inside wall for the label; write the numbers down exactly.

• Open the refrigerator (fresh food) door, not the freezer door
• Look on the inside wall of the refrigerator compartment
• Find the sticker or plate labeled “Model” and “Serial”
• Record the full model number (it often starts with “106.”)
• Record the serial number too (it helps match parts and diagrams)

Kenmore model numbers can look similar, and small differences change which parts fit (water filter, electronic control board, ice maker, door handle). Using the full model number helps us match the correct diagrams and replacement parts for your exact refrigerator.

• Wipe the label gently with a damp cloth, then dry it
• Use a flashlight and take a close-up photo to zoom in
• Copy every digit and punctuation mark (including any “106.” prefix)

The model and serial label is the single best source for identifying your exact Kenmore Elite refrigerator configuration, which prevents ordering the wrong part and speeds up troubleshooting.

For more details on recording your model and serial information, see the 10646023801 owner's manual.

Last updated: March 2026