Kenmore 79077483806 gas range Parts

A Kenmore gas range like model 79077483806 typically lasts 15 years with normal household use. Regular cleaning to prevent grease buildup and addressing heating problems early (like a weak igniter) helps you reach that lifespan.

Typical lifespan and what affects it

Most gas ranges reach their full service life when the burners ignite reliably, the oven holds temperature, and the controls stay responsive.

• Cooking frequency: daily high-heat use shortens life
• Cleaning habits: grease and spills accelerate wear and can create unsafe conditions
• Heat quality: slow ignition and uneven baking strain components
• Ventilation: good airflow reduces heat and grease stress on surfaces and wiring
• Timely part replacement: replacing a failing igniter or sensor prevents bigger failures

Maintenance checklist we recommend

Use your 79077483806 owner's manual for model-specific cleaning and operating guidance.

• Clean the cooktop and areas under burner heads regularly
• Keep the oven bottom and door frame areas free of baked-on spills before they carbonize
• Vent the kitchen well during heavy cooking and especially during self-clean
• Avoid leaving acidic spills (tomato, fruit fillings) on surfaces after cooking
• If the oven takes too long to light, test and replace the igniter promptly

Common “end-of-life” symptoms vs. fixable issues

Symptom	Most common cause	Often fixable by replacing
Oven won’t ignite or takes 60+ seconds	Weak igniter	Tappan range oven burner igniter 316489403
Oven temperature swings widely	Sensor drifting out of range	Frigidaire range oven temperature sensor 316490000
Heat leaks, longer preheat, uneven baking	Worn door gasket	Range oven door seal 5304498835

Why it matters

A 15-year lifespan is realistic, but performance and safety depend on keeping grease from accumulating and keeping ignition and temperature-control parts in good shape. Preventive maintenance also reduces nuisance shutdowns and inconsistent baking.

Last updated: February 2026

On Kenmore gas range model 79077483806, the model and serial number are printed on an identification plate located on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment. The exact placement is shown in the 79077483806 owner's manual.

Where to look on model 79077483806

Check these spots in this order:

• Pull out the storage drawer (or open the warmer drawer, if your range has one)
• Look on the right-hand side of the oven front frame (the vertical frame area behind the drawer)
• If your model uses a lower panel instead of a drawer, remove that panel and check the same right-side frame area
• Use a flashlight; the plate can be easy to miss against the frame

What the identification plate tells you (and why it matters)

The identification plate is more than a label; it helps us match the correct Kenmore range parts and settings for your exact build.

Item on plate	Why you need it
Model number	Ensures diagrams and parts match your exact range
Serial number	Helps confirm production series and compatible replacements
Fuel and pressure info	Confirms natural gas vs LP conversion details
Burner ratings	Helps when diagnosing weak heat or flame issues

Tips for recording it correctly

• Write down the full model number and serial number exactly as shown
• Take a clear photo before the label gets worn or greasy
• Keep the info with your purchase records for faster parts ordering and troubleshooting

If you are already ordering parts

Use the model number first, then match the part by name and ID. For example, if you are diagnosing an oven that will not heat, a common related part is the tappan range oven burner igniter 316489403 (only use parts that match your exact symptom and diagram callout).

Last updated: February 2026

For the Kenmore 79077483806 gas range, the most commonly replaced parts are the oven igniter, oven temperature sensor, surface burner components, and oven light parts. These items directly affect heating, ignition, and visibility, so they are frequent fixes for “won’t heat” or “won’t ignite” symptoms.

Commonly replaced parts for this model

These are the parts we see replaced most often on gas ranges like the 79077483806, and they are available for this model:

• Oven igniter: a weak igniter is a top cause of no-bake or slow preheat
• Oven temperature sensor: helps regulate oven temperature and prevent overheating
• Surface burner head: affects burner flame pattern and ignition consistency
• Surface burner valve: can cause a burner to not light or to have an unstable flame
• Oven light bulb and lens: restores interior visibility
• Oven door seal: helps maintain stable baking temperatures

Quick “symptom to part” guide

Symptom	Most likely part to check	Example part on this model
Oven won’t heat, no glow at igniter	Oven igniter	Range oven igniter 5304506545
Oven heats but temperature is off	Oven temperature sensor	Frigidaire range oven temperature sensor 316490000
Burner clicks but won’t light or flame is uneven	Burner head or igniter/orifice holder	Range surface burner head 316212400
Oven light out	Bulb or socket	Appliance light bulb, 40-watt 316538904

How we recommend you confirm the right part

Use these checks to match the failure to the correct replacement:

• Compare the symptom to the table above
• Inspect for visible damage (cracks, heavy corrosion, burned wiring)
• For electrical parts, test continuity with a meter (power off)
• Confirm gas type and installation details before changing gas components
• Use the exploded-view diagrams and part descriptions to match your exact configuration

Why it matters

Replacing the correct ignition or temperature-control part first prevents repeat repairs and helps your Kenmore range heat safely and consistently. For gas ranges, ignition strength and proper flame are the foundation of reliable baking and broiling.

For model-specific operating and troubleshooting steps, use the 79077483806 owner’s manual.

Last updated: March 2026