Craftsman 917270682 tractor Parts

For a Craftsman riding lawn tractor like model 917270682, we look up the model number by finding the model and serial tag on the tractor and then using that exact model number (and often the serial) to match the correct parts list and owner's manual. The tag is typically on the frame under the seat or on the underside of the seat; confirm the exact location in the 917270682 owner's manual.

Where to find the model and serial tag

Check these common locations first (clean off grass and dirt so the numbers are readable):

• On the frame directly under the seat
• On the underside of the seat pan
• Near the rear fender area around the seat mounting points
• On a sticker or metal plate with “Model” and “Serial” fields

What to write down (so parts match)

Record the information exactly as shown on the tag.

• Full model number (example format: 917.270682)
• Serial number
• Any product number or type number listed
• Engine model information (helpful for engine parts)

Quick match guide

You have	Use it for	Why it helps
Model number (917270682)	Tractor and deck parts lookup	Ensures diagrams and parts lists match
Serial number	Production break matching	Avoids ordering the wrong revision
Engine model/type	Engine-specific parts	Engines can vary within the same tractor model

Why it matters

Craftsman tractors often share similar frames and mower decks across multiple models. Using the exact model number and serial number prevents mismatches on common wear items like blades, belts, mandrel parts, and steering components.

Related parts you might match by model

If you are confirming deck-related parts for 917270682, a common example is the husqvarna lawn tractor mulching blade, 21-in 532134149. Always verify fit by model and deck configuration before ordering.

Last updated: February 2026

The Craftsman riding mower model 917270682 uses a 16.0 HP, electric-start engine (as specified in the 917270682 owner's manual). This model is an automatic lawn tractor with a 42-inch mower deck, so it is built for steady power and consistent cutting performance.

What we can confirm for model 917270682

From the model documentation, we can rely on these model-specific details:

• Engine output: 16.0 HP
• Starting system: electric start
• Mower deck size: 42 inches
• Tractor type: front-engine, automatic lawn tractor
• Brand: Craftsman

What “engine does it use?” usually means

Many owners are really asking for the engine manufacturer (for example, Briggs & Stratton, Kohler, Tecumseh) or the engine model number. On riding mowers, that information is typically found on:

• The engine ID label on the blower housing or valve cover area
• The emissions label (often near the muffler or shroud)
• The engine section of the 917270682 owner's manual

Quick ID checklist (before ordering engine parts)

Use these steps so you match the correct tune-up and fuel parts:

• Write down the engine model, type, and code from the engine label
• Confirm whether your tractor has a single-cylinder layout (common on 16 HP tractors)
• Check that the deck is the 42-inch configuration before buying blades or mandrel parts
• If you are servicing the cutting system, inspect the mandrel and blade mounting star

Related specs at a glance

Item	What to look for	Why it matters
Horsepower	16.0 HP	Helps match engine service parts and performance expectations
Start type	Electric start	Points to battery, starter, solenoid, and key switch checks
Deck size	42-inch	Determines blade length, belt routing, and mandrel style

Why it matters

The exact engine make and model controls which spark plug, air filter, fuel filter, and carburetor parts fit. Even within the same Craftsman tractor model family, engine variants can change what maintenance parts you need.

Last updated: February 2026

For a Craftsman riding tractor like model 917270682, a complete engine replacement (parts plus labor) typically runs $600 to $2,500. The biggest cost drivers are the engine brand/horsepower, whether the replacement is a direct bolt-on match, and the labor time to swap and test it.

What affects the total price?

• Engine cost: New replacement engines commonly fall in the $400 to $1,800 range.
• Labor time: Most riding mower engine swaps take 4 to 8 hours depending on access, wiring, and pulley alignment.
• Extra parts and supplies: Oil, filter, fuel line, clamps, belts, and hardware often add $25 to $200.
• Electrical and safety checks: Seat switch, brake/clutch interlock, and wiring condition can add time.
• Fuel condition: Stale fuel can create “new engine” starting issues; our manual guidance is to use fuel within about 30 days of purchase. See the 917270682 owner's manual.

Quick cost breakdown (typical ranges)

Cost item	Typical range	Notes
Replacement engine	$400 to $1,800	Varies by spec and availability
Labor	$200 to $700	Based on shop rate and hours
Fluids, filter, misc. parts	$25 to $200	Oil, filter, clamps, hardware
Total installed	$600 to $2,500	Most common real-world range

Before you replace the engine, check these items

Many “needs an engine” symptoms are caused by starting, fuel, or safety interlock problems.

• Battery charge and cable connections
• Starter solenoid and starter motor operation
• Safety interlock switches (seat switch, brake/clutch switch, PTO switch)
• Fuel freshness and fuel delivery (stale fuel is a common culprit)
• Basic tune-up items (spark plug, air filter)

If the engine clicks but won’t turn over, use riding lawn mower engine clicks but doesnt turn over video to narrow it down before committing to an engine.

Why it matters

An engine is one of the highest-cost repairs on a riding mower. Confirming the real failure first helps you avoid replacing an engine when the actual fix is a battery, wiring issue, or safety switch adjustment.

Last updated: February 2026

For Craftsman lawn tractors like model 917270682, the year is identified from the product identification tag (model and serial number). Find the tag, record the serial number exactly, then decode the date code format used on that tag; our 917270682 owner's manual helps you confirm you are using the correct tractor model information.

Where to find the identification tag

On many Craftsman front-engine lawn tractors, the model and serial tag is commonly located:

• Under the seat or on the seat pan/bracket area
• On the rear fender pan near the seat
• On a frame rail near the engine compartment
• Near the footrest area on the frame

Clean the tag and copy the serial number character-for-character.

How to decode the build year from the serial number

Craftsman used multiple serial formats over time. Use these checks in order:

• Look for a 6-digit date code that reads MMDDYY; the last two digits are the year
• If the serial is longer, look for a 6-digit block that matches a real month and day (01-12 and 01-31)
• If the tag prints MFG DATE or DOM, use that printed date as the build date

Example date code

Code on tag	Decodes as	Build year
071294	July 12, 1994	1994

Why it matters

The build year helps us match the correct parts and diagrams for your exact tractor configuration (mower deck, steering, wheels). That prevents ordering a look-alike part that does not fit.

Tips to avoid common mistakes

• Use the tractor serial tag, not the engine model number
• Record letters and numbers carefully; one wrong digit can change the year
• Use the model number exactly as shown for this tractor: 917270682

Last updated: February 2026