Samsung DV395ETPASU/A1-00 dryer Parts

Yes; for a Samsung DV395ETPASU dryer, replacing the heating element is usually worth it when the dryer otherwise runs normally (tumbles, controls work, airflow is good). The part cost is typically far less than a new dryer, and a correct diagnosis prevents repeat failures.

• The drum tumbles and the timer advances, but clothes stay cold or damp.
• You have strong airflow at the outside vent and the lint filter is kept clean.
• The dryer heats intermittently and you have ruled out vent restriction.
• The rest of the dryer is in good condition (no loud bearing/roller noise, no burning smell).

A failed safety device or airflow problem can mimic a bad element. Samsung notes it is normal for the heating element to cycle on and off during a cycle, so focus on whether it ever produces heat and whether airflow is restricted. Use the troubleshooting section in the DV395ETPASU owner’s manual to confirm symptoms and checks.

• Clean the lint screen before or after each load.
• Inspect and clear the exhaust duct; crushed or lint-packed venting overheats the heater circuit.
• Verify the dryer is on the correct power supply (electric dryers need full 240V to heat).
• If the dryer overheated, test the safety cutoffs before replacing the heater.

If you are replacing the heater, we often see customers also test or replace the Samsung dryer heating element DC47-00019A and the dryer thermal cut-off thermostat DC47-00016A as a set when overheating or repeated no-heat happens.

A new heating element will not last if airflow is restricted. Keeping the lint filter clean and the exhaust system clear reduces overheating, improves dry times, and helps protect thermostats, fuses, and the heater.

Last updated: February 2026

For your Samsung dryer model DV395ETPASU, we find the correct part number by matching the dryer’s model number (and sometimes the serial number) to the parts list, then selecting the exact component name you need. The model/serial tag is typically on the front frame behind the door; a backup tag is often on the back.

Check these common locations on Samsung front-load dryers:

• Front frame behind the door opening (most common)
• Back panel of the cabinet (secondary label)
• Inside the door area near the opening (around the rim)

Once you confirm the model number is DV395ETPASU, use the exploded views and parts list in the DV395ETPASU manual to identify the exact part name and reference number.

Use this process to avoid ordering the wrong Samsung part:

• Write down the full model number and serial number from the tag
• Identify the symptom (no heat, noisy drum, won’t start, long dry times)
• Locate the part by name in the parts diagram (example: heating element, belt, roller)
• Compare the part description to what you see on the dryer (shape, mounting points, wire terminals)
• If multiple versions exist, match by serial range or revision notes shown with the parts listing

These are frequent “search targets” when you already know what failed:

Samsung often uses similar-looking parts across different dryers, but wiring, mounting, and temperature ratings can vary by model revision. Matching parts to DV395ETPASU prevents fit issues and repeat failures.

Last updated: February 2026

A Samsung dryer typically lasts 10 to 15 years. For your Samsung DV395ETPASU dryer, consistent airflow maintenance (lint filter and venting) and proper loading have the biggest impact on reaching the high end of that range; see the care and loading guidance in the DV395ETPASU owner's manual.

• Vent restriction: blocked or crushed ducting makes the dryer run hotter and longer.
• Lint filter habits: cleaning every load reduces heat stress and improves drying.
• Load size: overloading strains the drive system and reduces airflow.
• Heat management: repeated overheating shortens the life of thermostats and fuses.
• Wear parts: rollers and belts wear gradually and get noisy before failing.

The DV395ETPASU manual highlights cleaning the lint filter and monitoring venting (Vent Sensor) to keep the dryer safe and efficient.

• Clean the lint filter before or after every load.
• If the Vent Sensor light comes on or blinks, inspect and clean the exhaust duct.
• Keep the vent run short, straight, and not crushed behind the dryer.
• Follow load guidance: many cycles perform best around half a drum; avoid packing items tightly.

A dryer that is forced to dry with poor airflow runs longer and hotter, which accelerates wear on the heating element, thermostats, and motor. Keeping lint and venting under control is the simplest way to extend service life and improve drying performance.

Last updated: February 2026