Kenmore 10650522100 side-by-side refrigerator Parts

The most common problems we see on Kenmore refrigerators like model 10650522100 are ice maker issues, weak or no cooling, water leaks, frost buildup from defrost problems, and doors that do not seal or close correctly. Many fixes start with airflow, cleaning, and basic checks in the owner's manual.

Common problems and what usually causes them

• Ice maker not making ice or slow ice: clogged water filter, frozen fill tube, low water pressure, or a failing ice maker.
• Refrigerator not cooling well: blocked air vents, warm food load, or a fan/defrost issue.
• Moisture buildup inside: frequent door openings, humid room air, or blocked vents.
• Frost buildup: defrost system trouble (heater, defrost bi-metal, timer) or door seal leaks.
• Doors hard to open or not closing: dirty or sticky gaskets, unit not level, or worn door cam.

Quick checks we recommend first (safe DIY)

• Make sure air vents are not blocked by food packages.
• Set controls correctly for room conditions; after a big grocery load, allow several hours to recover.
• Clean sticky door gaskets with mild soap and water; dry fully.
• If the unit has digital controls and cooling is off, turn it OFF then ON to reset.
• Level the refrigerator if it wobbles; poor leveling can affect door closing.

Parts that commonly solve these symptoms (when a part is actually bad)

Symptom	Common part to check	Example part for 10650522100
No ice or poor ice production	Ice maker assembly	Ice maker assembly - refrigerator ice maker by whirlpool 4317943
Heavy frost, warm temps	Defrost timer	Refrigerator defrost timer W10822278
Heavy frost, warm temps	Defrost bi-metal	Refrigerator defrost bi-metal WPW10225581
Door not closing smoothly	Door closer cam	Refrigerator door closer cam WPW10329686

Why it matters

Cooling and ice maker complaints often trace back to airflow and defrost performance. When vents are blocked or frost builds up, the refrigerator section can warm up even if the freezer still seems cold. Door sealing and leveling also matter because warm, moist air entering the cabinet drives frost and moisture problems.

Ordering the right replacement part

We recommend matching parts by the full model number 10650522100 and comparing the part description to your symptom. You can order model-matched parts from the list for this refrigerator, or search by model on Sears PartsDirect.

Last updated: February 2026

On a Kenmore 10650522100 side-by-side refrigerator, “error 15” is not a standard error code shown in the owner documentation; when customers see “Er 15” on some Kenmore-branded units, it commonly points to an ice maker sensor issue. Use the display format and symptoms to confirm the right troubleshooting path in the 10650522100 owner's manual.

Confirm what you are actually seeing

Different Kenmore refrigerator platforms use different code formats. Before troubleshooting, match the code style to your display.

• If the display shows “Er 15” or “Er IS”, treat it as an ice maker sensing problem.
• If the display shows “15” only, check whether it is a temperature setting, service test step, or diagnostic mode indicator.
• If ice production stopped, cubes are misshapen, or the ice maker is jammed, focus on the ice maker and freezer checks.

Quick checks that fix many “Er 15” ice maker complaints

These steps address the most common causes: a jam, a full bin condition, or water supply restriction.

• Power reset: unplug (or switch off breaker) for 2 minutes, then restore power.
• Check for a jam at the ejector area; clear ice with a plastic utensil (no sharp tools).
• If a large amount of ice was just removed, allow 24 hours for normal production.
• Confirm freezer temperature is cold enough for ice making (most units perform best near 0°F).
• If a water filter is installed, make sure it is seated correctly and not clogged.

When a part is likely involved

If the code returns after the checks above, the ice maker assembly or its sensing components are a common next step.

Symptom	Most likely area	What to do next
No ice, repeated “Er 15/Er IS”	Ice maker sensing or module	Inspect wiring and ice maker; replace if needed
Ice maker cycles but no fill	Water supply or restriction	Check filter seating, water line, inlet flow
Ice clumps, overflow, odd shapes	Ice maker mold or control	Check for freezing/overfill; inspect ice maker

For replacement, use the model-matched ice maker assembly - refrigerator ice maker by whirlpool 4317943.

Why it matters

An ice maker sensor or sensing circuit problem can stop ice production and can also lead to overfilling or jams. Addressing it early helps prevent repeated freezing, clumping, and dispenser issues.

You can order replacement parts for Kenmore 10650522100 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10650522100, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Use the full model number from that label when ordering parts or looking up service information in the 10650522100 owner's manual.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door.
• Look along the inside side walls of the fresh food compartment.
• Check near the upper area where labels are commonly placed.
• The label typically lists both the model number and serial number.
• Write the model number exactly as shown (for this unit, it is 10650522100).

What you will see on the label

The label usually includes these fields, which help us match the correct Kenmore parts and diagrams:

Label item	What it’s used for
Model number	Identifies the exact refrigerator design and parts list
Serial number	Identifies the production unit; helpful for service history
Purchase date (you record it)	Helpful for your own records and maintenance tracking

Why it matters

Kenmore model numbers can look similar, but small differences change the correct ice maker, thermostat, defrost parts, and door hardware. Using the model number from the inside-wall label helps ensure you get the right replacement part the first time.

Ordering parts once you find it

After you confirm the model number, you can order replacement parts from the parts list for 10650522100 on this page, or search by model number on Sears PartsDirect.

Last updated: February 2026