Kenmore Elite 10654783803 refrigerator Parts

Kenmore model numbers are read left to right: the first 3 digits identify the manufacturer, the next group identifies the base model, and the remaining digits show the specific feature or design variation. For your Kenmore Elite refrigerator model 10654783803, the 106 prefix is the key identifier.

Most Kenmore refrigerator model numbers follow this pattern:

• Prefix (first 3 digits): manufacturer code (for example, 106)
• Middle digits: base model family/series
• Ending digits: version, color, feature package, or production variation

To confirm where the model and serial tag is located and how Kenmore formats it for service and parts lookup, use the 10654783803 owner's manual.

The prefix helps us match your refrigerator to the correct parts design and service information. That matters because parts like a water filter, electronic control board, or water inlet valve can vary by manufacturer family even when the refrigerator looks similar.

Common examples of what the prefix helps narrow down:

• Correct water filter style and cap fit
• Correct wiring and connector style for control boards
• Correct door hardware and gasket profiles
• Correct ice maker and dispenser component families

Here is a simple way to break down 10654783803:

For this model family, the manual lists the base grille water filter replacement as part number 9030. If you are shopping by part ID, that corresponds to the genuine Kenmore refrigerator water filter EDR3RXD1.

Reading the model number correctly prevents ordering the wrong part and saves time during troubleshooting, especially for water system parts (filter, valve) and cooling system parts (defrost heater, thermostat).

Last updated: January 2026

A Kenmore Elite refrigerator like model 10654783803 typically lasts 10 to 15 years. With consistent maintenance (clean condenser coils, good door sealing, and stable temperatures), many units reach the upper end of that range before major sealed-system or compressor repairs become more likely.

Most side-by-side refrigerators follow a similar life pattern:

• 0 to 5 years: Mostly minor issues (icemaker, dispenser, lights, bins)
• 5 to 10 years: Wear items show up (door gaskets, fans, defrost components)
• 10 to 15 years: Higher chance of major repairs (control board, compressor, sealed system)
• 15+ years: Possible with excellent care, but repair frequency usually increases

These habits reduce strain on the compressor and help prevent temperature swings:

• Vacuum and brush condenser coils regularly
• Keep door gaskets clean and ensure doors close fully
• Set stable temps (about 37°F fresh food and 0°F freezer)
• Replace the water filter on schedule to protect water flow and taste
• Avoid overpacking so air can circulate around vents

Use this as a practical decision check when problems start:

A refrigerator near the end of its typical lifespan often uses more energy and struggles to hold safe food temperatures. Staying ahead of airflow, sealing, and filtration helps your Kenmore Elite 10654783803 run more efficiently and last longer.

For model-specific care and maintenance intervals, follow the 10654783803 owner’s manual.

Last updated: January 2026

For Kenmore Elite refrigerator model 10654783803, the exact cubic-foot capacity is not listed in the manual sections we have for this model; most Kenmore side-by-side refrigerators of this style are typically about 22 to 26 cu. ft. total capacity. For the most accurate spec, check the model’s rating label and the 10654783803 owner's manual.

The most reliable way to confirm capacity is to use the information printed on the appliance.

• Check the model and serial tag inside the fresh food compartment (often on a side wall)
• Look for wording such as “Capacity”, “Total volume”, or “cu. ft.”
• If the tag lists only model/serial, search the specifications section in the 10654783803 owner's manual
• If you have the original sales paperwork, capacity is often listed there

These ranges help you sanity-check what you find on the label.

Capacity affects how you plan storage (shelves, door bins, meat pan) and can also influence cooling performance expectations after door openings or heavy loading.

Last updated: January 2026

Kenmore Elite is a premium Kenmore product line name that has been used across multiple appliance types for many years; there is not one single “release year” that applies to every Kenmore Elite appliance. For your Kenmore Elite side-by-side refrigerator model 10654783803, the meaningful date is the manufacturing date of your specific unit, which we determine from the serial number.

Use the model and serial tag on the refrigerator cabinet, then follow the identification and service information in the 10654783803 owner's manual.

Common places to find the model and serial label:

• Inside the fresh food compartment on a side wall
• Near the crisper area or lower side wall
• Behind the toe grille at the bottom front
• On the back exterior panel

The line name tells you the feature tier; the serial number tells you when your refrigerator was built.

The build date helps us match the correct replacement parts and revisions for your exact production run, especially for water system and defrost components.

If you are maintaining the water system on this model, the manual lists a base grille replacement filter (part #9030); a current replacement option is the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026