Kenmore 10651759710 side-by-side refrigerator Parts

To read a Kenmore refrigerator model number, we match the full number exactly as it appears on the rating label (for this unit: 10651759710) and use it to identify the correct parts list, Use and Care Guide, and compatible replacement parts. On most Kenmore side-by-side refrigerators, the label is inside the fresh food compartment or inside the freezer.

Where to find the model number label

We typically see the model and serial label in one of these spots:

• Inside the refrigerator compartment on a side wall
• Inside the refrigerator compartment behind or near the crisper drawers
• Inside the freezer compartment on a side wall
• Along the door frame (fresh food or freezer side)
• Behind the lower toe grille (kick plate) area

For model-specific diagrams and label locations, use the 10651759710 owner's manual.

How to interpret Kenmore model numbers (what matters for parts)

For parts lookup and troubleshooting, we focus on these details:

• Exact model number: Use every digit (example: 10651759710, not just “106.5175”)
• Prefix: Many Kenmore refrigerators use a 3-digit prefix (such as 106) that points to the manufacturing source family
• Serial number: Helps identify production run details when a part changes by revision
• Color code or suffix: Some manuals list model families with a color placeholder (often shown as an asterisk)

Quick guide: what to write down

What to record	Example	Why it matters
Model number	10651759710	Ensures correct parts and diagrams
Serial number	(from label)	Helps confirm version changes
Brand/type	Kenmore side-by-side refrigerator	Narrows troubleshooting steps

Why it matters

Using the exact model number prevents ordering the wrong items such as an ice maker, water inlet valve, or door bin. Even small differences in a Kenmore 106-series refrigerator can change which parts fit.

Last updated: February 2026

A bad compressor on your Kenmore side-by-side refrigerator model 10651759710 usually shows up as poor cooling with the unit running a lot, unusual clicking or buzzing, or the compressor repeatedly trying and failing to start. Before condemning the compressor, we verify airflow, condenser cleanliness, and power to the unit using the 10651759710 owner's manual.

Quick symptoms that point to a compressor problem

• Refrigerator and freezer are warm even though the unit runs for long periods
• Repeated clicking (start device trying to start the compressor) followed by silence
• Compressor is very hot to the touch after running attempts (use caution)
• You hear fans running, but temperatures do not recover after 24 hours
• Breaker trips or the unit shuts down shortly after the compressor tries to start

Rule out common look-alikes first (most important)

Many “bad compressor” calls are actually airflow, heat removal, or control issues.

• Allow time after changes: after installation or major temperature changes, allow 24 hours for full cooling
• Condenser heat removal: clean condenser coils and confirm the condenser fan (if equipped) runs
• Evaporator airflow: listen for the evaporator fan; a failed fan motor can mimic compressor failure
• Door sealing and loading: frequent door openings or a warm room can make the compressor run longer than expected
• Water line noises vs. compressor noises: buzzing/clicking can be normal when the water valve operates (ice maker fill)

If you suspect an airflow issue, the evaporator fan motor WP2315549 and evaporator fan blade WP2169142 are common cooling-air components for this model.

What we check to confirm a failing compressor

A technician typically confirms compressor failure with electrical and sealed-system checks.

Check	What it indicates	Who should do it
Compressor tries to start then clicks off	Hard-start condition, overload opening	Technician recommended
Amp draw at startup and while running	Locked rotor or inefficient compressor	Technician
Continuity to ground (short test)	Internal short	Technician
Frost pattern on evaporator	Sealed-system or airflow diagnosis	Technician

Why it matters

Replacing a compressor is a major repair; confirming the real cause prevents replacing an expensive sealed-system part when the issue is actually a fan, dirty coils, or a door seal problem.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 36 inches wide. For Kenmore model 10651759710, the 10651759710 owner's manual specifies a 36 inch (91.44 cm) minimum cabinet cut-out width for installation, which is the practical width you should plan around.

What to measure (so you get the right fit)

Use a tape measure and confirm these before delivery or reinstall:

• Cabinet opening width (side-to-side space between cabinets)
• Refrigerator case width (body only, doors closed)
• Door swing clearance (space needed to fully open doors)
• Depth clearance behind the unit (for airflow and water line)
• Height clearance (including hinge cover area)

Model 10651759710 clearance guidelines from the manual

The manual calls out these common spacing needs for proper ventilation and door swing:

• 1/2 inch on each side and at the top
• 2 inches behind the refrigerator
• About 2 inches minimum at the side near a fixed wall (varies by setup)

What you are planning for	Typical number to use	Why it matters
Standard side-by-side width	36 in	Fits most cabinet cutouts and door openings
Minimum cabinet cut-out width (10651759710)	36 in	Ensures the refrigerator can be installed
Extra space behind unit	2 in	Airflow plus room for water line connections

Why it matters

Width is not just about sliding the refrigerator into place. If the opening is tight, you can lose door swing, crisper access, and ventilation space, which can hurt cooling performance and make service harder.

Last updated: February 2026

For Kenmore side-by-side refrigerators like model 10651759710, the most common problems are cooling issues, water or ice dispenser troubles, leaks, and unusual noises. These usually trace back to airflow restrictions, water supply or filtration problems, or a failing fan or valve; our 10651759710 owner's manual covers the key checks.

Most common issues and what they point to

• Not cooling or warm temperatures: dirty condenser coils, blocked vents, frost buildup from a defrost problem, or a failed evaporator fan.
• Refrigerator will not run at all: power supply issue (outlet, breaker, fuse) or a control problem.
• Ice maker not making ice: low water pressure, a clogged filter, a frozen fill tube, or a bad ice maker.
• Water dispenser slow or not dispensing: dispenser lock on, clogged/incorrectly installed filter, or low supply pressure (reverse osmosis can reduce pressure).
• Water leaking or dripping at the dispenser: air in the lines after installation or filter change; holding the glass under the spout too briefly can also cause drips.
• Noisy operation: fan blade hitting ice, worn fan motor, or items vibrating inside.

Quick checks we recommend first (fast, no parts)

• Confirm the unit is plugged into a grounded 3-prong outlet and the breaker is not tripped.
• After a new install or power loss, allow 24 hours for full cooling.
• Make sure vents inside both compartments are not blocked by food packages.
• If dispenser flow is weak, replace or reinstall the water filter and purge air from the lines.
• Listen for a fan noise change when doors open and close (helps narrow down fan vs. compressor).

Parts that commonly solve these symptoms on this model

Symptom	Common suspect part	Example model-matched part
Warm fridge/freezer, poor airflow	Evaporator fan motor or blade	Refrigerator evaporator fan motor WP2315549, refrigerator evaporator fan blade WP2169142
No ice or weak water flow	Water inlet valve	Refrigerator water inlet valve WPW10179146
Ice clumps, no ice harvest	Ice maker assembly	Refrigerator ice maker assembly WPW10300022

Why it matters

Cooling, ice, and water problems often share the same root causes: restricted airflow or low water flow. Fixing the underlying cause protects food temperatures, prevents repeat leaks, and reduces strain on the compressor.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10651759710, a “not cooling” problem is usually caused by loss of power, incorrect temperature control settings, blocked air vents, or doors not sealing. After any change, allow 24 hours for temperatures to stabilize (colder settings do not cool faster). See the 10651759710 owner's manual.

Quick checks (fastest fixes first)

• Confirm the refrigerator is plugged into a grounded 3-prong outlet (no adapter or extension cord).
• Check the outlet has power (test with a lamp) and reset the breaker if tripped.
• Verify both refrigerator and freezer controls are set near the normal mid-range.
• Make sure air vents are not blocked by food packages.
• Confirm doors close fully and gaskets seal; reduce frequent door openings.
• If it is a new install or was unplugged, wait a full 24 hours to cool.

Temperature controls: what to expect

The manual notes that each click/adjustment makes the compartment colder, but turning controls to the coldest setting will not cool faster. Use this as a guide:

Situation	What we recommend	What to avoid
Just plugged in or moved	Wait 24 hours before judging temps	Rapidly changing settings
Fridge warm, freezer OK	Adjust refrigerator control slightly colder	Setting both to max cold
Both warm	Check power, doors, vents first	Assuming it is “low refrigerant” immediately

When it points to an airflow or fan problem

If you hear the compressor running but temperatures keep rising, airflow inside the cabinet may be the issue. On this model, common airflow-related suspects include the evaporator fan area. If the fan is noisy, stalled, or not moving air, the refrigerator evaporator fan motor WP2315549 or refrigerator evaporator fan blade WP2169142 may be involved.

For step-by-step troubleshooting, use how to fix your evaporator cooling fan.

Why it matters

A refrigerator that is not cooling can spoil food quickly, and blocked vents or poor door sealing can also make the compressor run longer than normal. Fixing the simple causes first prevents unnecessary part replacement.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10651759710 has a total capacity of about 21.9 cubic feet. This is the overall interior volume (fresh food plus freezer) and is the number most people use when comparing refrigerator sizes.

How to confirm the capacity for your exact unit

We recommend checking the model’s documentation because capacity can vary slightly by configuration within the same model family.

• Look for “capacity,” “total volume,” or “specifications” in the 10651759710 owner's manual
• Verify the full model number from the rating label inside the refrigerator compartment
• Compare the listed capacity to what you see on retailer spec sheets (if you still have them)
• If you are measuring for fit, use cabinet dimensions, not cubic feet

Capacity vs. usable space (why it can feel smaller)

Even with a 21.9 cu. ft. rating, usable space is reduced by shelves, bins, the ice system, and air channels.

What you’re comparing	What it means	Best used for
Total capacity (cu. ft.)	Overall interior volume	Comparing refrigerator “size class”
Usable storage space	Space you can actually load	Planning groceries and containers
Exterior dimensions	Height, width, depth	Making sure it fits your kitchen opening

Why it matters

Capacity helps you choose replacement parts and accessories with the right fit and function (for example, door bins, shelves, and ice storage components) and helps set expectations for storage compared to other Kenmore 106 side-by-side models.

Last updated: February 2026

Most Kenmore refrigerators last 12 to 15 years on average with normal household use; your Kenmore side-by-side refrigerator 10651759710 typically fits that same range when it is installed correctly, kept clean, and has good airflow around the cabinet. For model-specific care and maintenance routines, follow the 10651759710 owner's manual.

Typical lifespan and what to expect

A refrigerator’s “lifespan” usually means the point where major sealed-system or control repairs become more common than routine part replacements.

• 0 to 5 years: mostly maintenance items (filters, light switch, icemaker adjustments)
• 6 to 10 years: higher chance of fan, valve, or icemaker repairs
• 11 to 15 years: cooling performance issues and larger repairs become more likely
• 15+ years: many units still run, but efficiency and repair frequency often worsen

Maintenance that helps you reach the high end of the range

Use these habits to reduce strain on the compressor and keep temperatures stable:

• Keep condenser area clean and maintain airflow around the refrigerator
• Set stable temps (commonly 37°F fresh food and 0°F freezer)
• Replace water filters on schedule if your model uses one
• Keep door gaskets clean so doors seal tightly
• Fix ice and water issues early (slow fill, hollow cubes, leaks)

Quick guide: symptoms that shorten lifespan

Symptom	Common cause	What to check first
Warm fridge or freezer	Airflow problem or fan issue	Frost buildup, vents blocked, fan running
Clicking, then no cooling	Start device or compressor strain	Airflow, dirty coils, power supply
Slow ice production	Water supply restriction	Filter, water pressure, inlet valve
Water leaking	Clogged drain or loose water line	Drain path, tubing connections

Why it matters

Hitting the 12 to 15 year average usually comes down to keeping heat moving out of the system and preventing small water or airflow problems from turning into compressor stress.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10651759710, we typically find the model and serial number tag on the inside cabinet wall of the fresh food (refrigerator) compartment after you open the refrigerator door; it is usually on a label you can read without moving the appliance. Check the 10651759710 owner's manual for the exact label location callouts.

Common places to check first

• Inside the fresh food compartment on a side wall (upper area is common)
• Along the door frame (hinge side) when the refrigerator door is open
• Behind the crisper drawers on the cabinet liner (look for a white or silver tag)
• On the ceiling of the fresh food compartment near the light housing
• On the back exterior panel near the power cord (less common, but worth a quick look)

What the tag looks like and what to write down

The tag usually lists both a model number and a serial number. We recommend copying them exactly.

Item on tag	Example format	Why you need it
Model number	106.5175* style family, or full model like 10651759710	Ensures parts match your exact Kenmore configuration
Serial number	Letters and numbers	Helps confirm production series and compatible revisions

Why it matters

Kenmore 106-series refrigerators can share similar doors, shelves, and ice maker layouts, but small design changes affect fit. Using the exact model number (and serial number when available) prevents ordering the wrong refrigerator parts.

Quick tips if the label is hard to read

• Wipe the label gently with a damp cloth and dry it; grease and dust can hide digits
• Use your phone camera and zoom in for clearer reading
• Write down the full number string, including any dots or suffix characters

Last updated: February 2026