Kenmore 66517373301 dishwasher Parts

Yes, for Kenmore dishwasher model 66517373301, we can replace many common parts ourselves if we shut off power and water first and follow the step-by-step procedures in the 66517373301 owner's manual. For electrical, leak, or motor-related repairs, the job is still DIY-friendly, but it requires more tools, time, and careful testing.

Many owners successfully handle wear-and-tear items (seals, racks, hoses). Repairs involving wiring, pumps, or heating take more skill because a wrong connection can cause a no-start, poor washing, or leaks.

• Good DIY: door seal replacement, rack and basket swaps, drain hose replacement
• Intermediate DIY: heater replacement, vent gasket replacement, fuse replacement
• Advanced DIY: pump/motor diagnosis, circulation issues, repeated error codes, persistent leaks

• Turn off power at the breaker (dishwashers are hard-wired or plugged in under the sink).
• Shut off the water supply valve.
• Protect the floor; keep towels ready for residual water.
• Take photos of wire and hose routing before disconnecting anything.
• Run a short test cycle after reassembly and check for drips at every connection.

Here are examples of model-matched parts that many customers replace themselves:

DIY replacement can restore cleaning and drying performance and stop leaks quickly, but using the correct procedure and part for 66517373301 prevents repeat failures and protects the tub, wiring, and wash system.

Last updated: February 2026

Yes. We still carry replacement parts for many Kenmore dishwashers, including Kenmore model 66517373301. The key is matching parts to your exact model number so items like the heater, drain hose, door seal, and pump motor fit and work correctly; use the 66517373301 owner's manual to confirm features and maintenance details.

• Use the full model number 66517373301 (from the tub rim or door edge label).
• Match by part ID when possible (it is the most precise identifier).
• Compare the part name and where it installs (heater vs. pump motor vs. seal).
• If your symptom is a leak, focus on seals and hoses first.
• If your symptom is poor drying, focus on the heating circuit and venting.

Kenmore is a brand name used across multiple manufacturing platforms. Even within the Kenmore 665 series, small design changes can affect fitment (mounting points, electrical connectors, hose routing). Using 66517373301 ensures you get the correct OEM-style replacement for your dishwasher.

• Shut off power at the breaker before servicing internal components.
• For plumbing-related parts, turn off the water supply and check for leaks after reassembly.
• Follow mounting, leveling, and drain routing guidance in the 66517373301 installation guide to prevent vibration, leaks, and drain problems.

Last updated: February 2026

On Kenmore dishwasher model 66517373301, the model number is printed on the model and serial number label located just inside the door opening, typically along the tub frame edge. Use that exact number when ordering parts or looking up service information in the 66517373301 owner’s manual.

• Open the dishwasher door fully.
• Look along the left side of the tub frame near the front edge.
• Check the top edge of the door opening if you do not see it on the side.
• Wipe the area with a damp cloth; labels can be hidden by residue.
• Write down both the model and serial numbers.

Kenmore dishwashers can look similar across multiple series, but parts like the heating element, door seal, and pump motor can vary by model. Using the exact model number from the door label prevents wrong-part returns and speeds up troubleshooting.

• Check for a second label on the door edge or tub opening.
• Look for your purchase paperwork or installation notes.
• Use the installation paperwork for your unit as a reference: 66517373301 installation guide.

Last updated: February 2026

To hard reset a Kenmore dishwasher model 66517373301, we clear the current cycle and options by using the CANCEL function, letting the unit drain, then restarting a fresh cycle. This restores normal operation when the control is stuck or a cycle will not advance.

• Press CANCEL once; the Cancel light should turn on.
• Close the door; the dishwasher runs a 2-minute drain (if needed).
• Wait until draining finishes and the Cancel light turns off.
• Press CANCEL again if you need to stop the drain early (only if necessary).
• Select a new cycle and any options.
• Press START and close the door firmly so it latches.

• Turn off power at the breaker for 1 minute, then restore power.
• Make sure the door is fully latched (a loose latch can mimic a control problem).
• If the dishwasher is completely dead (no lights), check the house breaker first.
• If it has power but acts erratic, inspect the control protection fuse; replace the fuse 8193762 if it is blown.

A proper reset clears stored cycle selections and stops a stalled wash safely by draining the tub first. That prevents restarting with leftover water, detergent, or a partially completed cycle.

For the exact button behavior and cycle restart details for this model, follow the 66517373301 owner's manual.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517373301 is worth it when the fix is a common wear item (seal, hose, heater, fuse) and the total repair cost stays well below the price of a comparable replacement. It is also worth it when the unit is still within warranty coverage described in the 66517373301 owner's manual.

Use these practical checkpoints:

• If the dishwasher is under 10 years old, repairs are typically the better value.
• If the repair is under 50% of replacement cost, repair is the better choice.
• If the problem is a leak or no-heat issue, it is often a straightforward parts repair.
• If multiple major symptoms stack up (won’t start + won’t drain + loud grinding), replacement becomes more attractive.
• If you have warranty coverage, repair is the clear winner.

These are frequent, fixable issues where parts replacement often restores normal operation:

A targeted repair keeps a solid Kenmore dishwasher running for years and avoids the cost and hassle of replacement. Your manual also outlines care and troubleshooting steps that prevent repeat failures (cleaning, drain air gap checks, and storage guidance). Review the 66517373301 installation guide if you suspect an install-related leak or drain issue.

• Confirm the symptom first (leak location, heat/dry performance, drain behavior).
• Clean filters and check spray arm obstructions before buying parts.
• Fix leaks promptly to prevent secondary damage.
• Use the correct part ID for your model to avoid returns and delays.

Last updated: February 2026

In a Kenmore dishwasher like model 66517373301, the most commonly replaced parts are the wash and drain components (pump, spray arms, feed tube), leak-prevention seals and hoses, and wear items like racks and baskets. These parts typically fail from clogs, heat stress, leaks, or normal wear.

• Heating and drying: a failed heater leaves dishes wet or cools wash water too much.
• Water movement and cleaning: circulation pump, chopper, and spray system issues cause poor wash results.
• Draining: drain hose restrictions or pump problems can leave standing water.
• Leaks: door seal, vent gasket, and other seals can drip at the door or base.
• Loading hardware: racks, tine rows, and silverware baskets crack, rust, or stop rolling smoothly.

These are common wear or failure points for many Kenmore 665-series dishwashers, including 66517373301:

Replacing the right part restores wash performance, prevents leaks that can damage cabinets, and avoids repeat failures. The manual also calls out key internal features like the heating element, spray arms, and ULTRA FLOW water feed tube, which are central to cleaning and drying performance.

• Clean the filter area and check for debris around the chopper inlet.
• Confirm the spray arms spin freely and the holes are not clogged.
• Look for leak tracks at the bottom of the door and around the vent area.
• Verify the drain hose routing is not kinked and the high loop is correct.
• Match parts by model and symptom using the diagrams in the 66517373301 owner’s manual.

Last updated: February 2026

On the Kenmore dishwasher model 66517373301, the filter is inside the tub at the bottom, under the lower spray arm area. Many Quiet Guard style Kenmore units use a filter basket and a filtration system in the sump area to catch and break down food soil.

1. Open the door and pull out the lower rack.
2. Look at the bottom center of the tub where the lower spray arm mounts.
3. Remove the lower spray arm (it typically lifts off or releases from its mount).
4. Under the spray arm mount, you will usually see a filter basket or screen area.

• Remove the lower rack for clear access
• Check for a twist-lock spray arm hub or retaining nut
• Lift out the filter basket or screen if it is designed to be removable
• Rinse debris off with warm water; use a soft brush if needed
• Reinstall parts firmly so the spray arm spins freely

Your 66517373301 is described as having a Triple Action Filtration system that intermittently filters soil from the wash water. That means cleaning the sump and screen area helps wash performance and reduces redepositing food particles.

A clogged filter or sump area can cause poor cleaning, gritty residue, odors between cycles, and sometimes draining issues. Keeping the filter area clear supports proper water flow to the spray arms and helps the filtration system work as designed.

• Use the cleaning and care steps in the 66517373301 owner's manual.
• If you are troubleshooting wash performance or a flashing code, use Kenmore 665 model dishwasher error codes.

Last updated: February 2026