Maytag MEDX500XW1 27" electric dryer Parts

You can get replacement parts for your Maytag MEDX500XW1 dryer directly from the parts list for this model, which helps you match the correct part to your exact dryer. For part identification and safe repair guidance, use the MEDX500XW1 owner's manual.

Using the model-specific parts list is the fastest way to avoid ordering the wrong item, especially for common wear parts like rollers, heating parts, and door switches.

• Match the full model number: MEDX500XW1
• Use the part description to confirm function (heat, drum support, door sensing)
• Compare your old part to photos and mounting style
• If multiple versions exist, verify by your dryer’s serial number range (when shown)
• Replace related wear items together when you already have the dryer opened up

These are frequently ordered parts for this 27-inch electric dryer; choosing the model-specific listing helps ensure fit.

Maytag dryers often have similar-looking parts across model families, but small differences (mounting brackets, wire terminals, sensor style) can change fit and performance. Using the MEDX500XW1 parts list and the MEDX500XW1 owner's manual helps you select factory-specified parts and install them correctly.

Last updated: February 2026

On your Maytag MEDX500XW1 electric dryer, the reliable way to tell if the thermal fuse is blown is to unplug the dryer and test the fuse for continuity with a multimeter. A blown fuse shows no continuity (OL or infinite resistance) and must be replaced.

• Unplug the dryer before removing any panels or touching wiring.
• If the dryer is hardwired, turn off both breakers (electric dryers use 2).
• Let the heater area cool completely before testing.
• Take a photo of wire locations before disconnecting anything.
• Use a multimeter set to continuity or the lowest ohms setting.

1. Access the thermal fuse location (commonly on the blower housing or exhaust duct area).
2. Pull the two wires off the fuse terminals (test the fuse, not the circuit).
3. Touch one meter probe to each terminal.
4. Read the result.

A thermal fuse usually opens because the dryer overheats. The most common cause is restricted airflow.

• Clean the lint screen and the lint screen housing.
• Check the vent path for kinks, crushing, or heavy lint buildup.
• Confirm you are using 4-inch venting and that the run is not excessively long with too many turns.
• Make sure the outside vent hood opens freely.
• If the drum turns but there is no heat, also check your home power supply; electric dryers typically use 2 fuses or breakers.

If testing shows the fuse is blown or you still have no heat after airflow is corrected, these model-compatible parts are common checks:

• Dryer thermal cut-off fuse kit 279973 (overheat protection components)
• Dryer heating element WP3387747 (heat source)
• Dryer high-limit thermostat WP3391914 (overheat control)
• Dryer thermistor WP8577274 (temperature sensing)

The thermal fuse is a safety device. Replacing it without correcting venting and airflow can lead to repeat failures, longer dry times, and overheating.

For panel access, venting requirements, and installation clearances, follow the installation guide.

Last updated: February 2026

The Maytag MEDX500XW1 27-inch electric dryer has a 7.4 cu. ft. capacity, which is a full-size drum designed to handle everyday family loads like towels, jeans, and mixed laundry. For cycle and loading guidance, use the MEDX500XW1 owner's manual.

A 7.4 cu. ft. drum is considered full-size for a 27-inch electric dryer. It supports efficient tumbling and airflow when loads are not overpacked.

• Dry mixed loads without tightly packing the drum
• Leave space for items to tumble (better drying, fewer wrinkles)
• Dry bulky items (like comforters) one at a time when possible
• Clean the lint screen before every load to maintain airflow
• Use timed dry for small loads that can overdry on sensor cycles

Capacity affects drying performance and fabric care. When the drum is overfilled, clothes cannot tumble freely, airflow drops, and drying times increase. Proper venting also plays a big role in real-world dry times; the installation instructions include vent-length guidance for best performance.

Last updated: February 2026