Owner’s manual
Error Codes
How big is the Whirlpool model GS6NBEXRS01?
The Whirlpool GS6NBEXRS01 is a full-size side-by-side refrigerator with a typical total capacity around 25 cu. ft. (often listed near 25.3 cu. ft. for this class). For the exact capacity and cabinet dimensions for your unit, use the GS6NBEXRS01 owner’s manual.
When customers ask how big a refrigerator is, it usually refers to one of these:
- Total capacity (cu. ft.): how much it holds
- Exterior dimensions: width, height, depth (including handles)
- Fit requirements: clearance for doors, airflow, and water line
- Interior layout: shelf and bin space that affects usable storage
Most Whirlpool side-by-side refrigerators in the ~25 cu. ft. class fall into these common ranges.
| Spec | Typical range | What to measure at home |
|---|---|---|
| Width | 32 to 36 in. | Cabinet width at the widest point |
| Height | 66 to 71 in. | Floor to top of hinge cover |
| Depth | 30 to 35 in. | Front (incl. handles) to back |
| Capacity | 24 to 26 cu. ft. | Use the model’s published rating |
We recommend verifying the published specs and then measuring your installation space.
- Check the specifications section in the GS6NBEXRS01 owner’s manual
- Measure width, height, and depth of the refrigerator cabinet
- Add clearance for door swing and drawer pull-out
- Leave airflow space at the top and back as specified in the manual
- If you have a water dispenser/ice maker, confirm space for the water line
Correct size prevents installation problems like doors hitting walls, poor ventilation that reduces cooling performance, and difficulty sliding the refrigerator into place, especially with an ice maker water supply line.
Last updated: January 2026
How to reset Whirlpool 6th sense fridge?
To reset a Whirlpool 6th Sense refrigerator like model GS6NBEXRS01, we use a simple control-panel reset: press the Freezer temperature (colder) button 3 times, release, then press it once more and release. This clears many minor control glitches.
- Confirm the display is responding (buttons beep or change the setting).
- Close both doors fully; door switches can affect controls.
- Wait 30 seconds after the last button press before testing ice and cooling.
- If the unit is in a cooling-off mode, turn cooling back on per the GS6NBEXRS01 owner's manual.
- Press the Freezer temp (colder) button three times (1-2-3).
- Release the button.
- Press the Freezer temp (colder) button one more time.
- Release and wait about 30 seconds.
Use these quick checks; they solve most “not cooling”, “no ice”, and “no water” complaints after a reset:
- Power-cycle the refrigerator: unplug for 2 minutes, then plug back in.
- Verify temperature settings: 37°F fresh food and 0°F freezer are typical targets.
- Check airflow: do not block vents with food packages.
- If water or ice is weak, replace the filter and purge air from the dispenser; the refrigerator water filter EDR3RXD1 is the correct filter option listed for this model.
- If water will not dispense at all, test the inlet valve and supply line; a common replacement is the refrigerator water inlet valve WPW10159839.
| Symptom | Reset helps most when | Next step if it returns |
|---|---|---|
| Display frozen or unresponsive | Control glitch | Power-cycle, then check door switch |
| Ice maker stopped after outage | Control state confusion | Check freezer temp and water supply |
| Water dispenser slow | Air in line or clogged filter | Replace filter, purge dispenser |
A reset restores normal control logic after a power flicker or button sequence error, which can prevent the ice maker, dispenser, or cooling system from running correctly even when the refrigerator has power.
Last updated: January 2026
What is the most common problem with Whirlpool refrigerators?
Cooling complaints are the most common issue we see across Whirlpool refrigerators, including the Whirlpool GS6NBEXRS01 side-by-side; they’re usually caused by restricted airflow (dirty condenser coils), a weak evaporator fan, or a defrost problem that lets frost block the evaporator.
- Refrigerator section is warm but freezer seems OK
- Freezer temperature swings or frost builds up on the back wall
- Unit runs constantly or seems louder than normal
- Ice maker or dispenser performance drops (often after cooling issues start)
- Water dispenser flow slows (commonly tied to a clogged filter)
- Clean the condenser coils (unplug first). Dust buildup makes the compressor run longer and reduces cooling.
- Confirm vents are clear inside both compartments; don’t block return-air openings with food packages.
- Listen for the evaporator fan in the freezer; if it’s not running, cold air will not circulate well.
- Check for heavy frost on the freezer back panel; that points to a defrost system issue.
- Verify door sealing; a leaking gasket pulls in humid air and creates frost and temperature swings.
| Problem area | What it affects | Example part for GS6NBEXRS01 |
|---|---|---|
| Water filtration | Slow water flow, poor ice quality | Refrigerator water filter EDR3RXD1 |
| Defrost system | Frost buildup, warm refrigerator section | Refrigerator defrost bi-metal WPW10225581 |
| Air circulation | Warm spots, noisy operation | Evaporator motor WP2315549 |
When cooling or airflow is off, food temperatures rise and the refrigerator works harder. That increases energy use and can trigger secondary complaints like weak ice production, dispenser issues, and unusual fan noise.
For control settings, airflow locations, and the correct cleaning and troubleshooting steps for your Whirlpool GS6NBEXRS01, use the GS6NBEXRS01 owner’s manual.
Last updated: January 2026
