Kenmore 11026901691 washer Parts

Your Kenmore washer model number is printed on the model and serial number plate; on model 11026901691, use that exact number when ordering parts or looking up troubleshooting steps. On most Kenmore top-load washers, the plate is typically under the lid or on the cabinet rim near the opening.

Where to look on Kenmore washers

Check these common locations first:

• Under the lid, along the top rim of the washer opening
• On the back panel near the power cord entry
• Behind the control panel area (varies by design)
• Inside the cabinet on a metal plate (visible when the lid is open)

For the official reference and how the plate is described, use the 11026901691 owner's manual.

What the model number looks like (and why it matters)

Kenmore washer model numbers are often 11 characters or more and may start with 110 (common on many Kenmore-built-by-Whirlpool designs). Using the full model number helps us match the correct diagrams and parts like a lid switch, drain pump, or motor coupling.

Quick examples

What you see	What it means	What to do
11026901691	Full model number	Use it to match parts and manuals
110.26901691 (with a dot)	Same model, formatted differently	Ignore punctuation; use the digits
Serial number only	Production identifier	Keep it for service records, but use the model for parts

Tips to avoid ordering the wrong part

• Write down the model number exactly as shown on the plate
• Take a clear photo of the plate before you start shopping
• Match the model first, then confirm the part by name and symptom
• If the washer will not spin or drain, a common check is the washer lid switch WP3949238

Why it matters

Kenmore washers share many similar-looking parts across model families; the model number is what ensures the right fit, correct wiring style, and proper mounting for components like the timer, inlet valve, and drive system.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable washing and spinning for far less than replacing the machine. For Kenmore model 11026901691, common wear items (like the lid switch, drain pump, or motor coupling) are often straightforward repairs that extend service life.

How we decide if repair makes sense

Use these practical checkpoints before spending money on parts or labor:

• Symptom severity: no spin, no drain, or won’t start usually points to a specific part.
• Cost vs. replacement: if the repair is a fraction of a comparable new washer, repair wins.
• Part availability: if key parts are in stock, downtime stays low.
• Condition of tub and cabinet: heavy rust, chronic leaks, or severe vibration can shift the decision.
• Confidence in diagnosis: a clear diagnosis prevents repeat repairs.

High-value repairs for this model (common culprits)

These parts commonly solve “dead,” “won’t spin,” or “won’t drain” complaints on direct-drive Kenmore top-load designs:

Problem you see	Often-related part	What it affects
Won’t start or won’t spin with lid closed	Washer lid switch WP3949238	Safety interlock for motor/spin
Won’t drain or leaves water in tub	Washer drain pump WP3363394	Pumps water out during drain
Agitates but won’t spin (or vice versa), loud grinding	Coupling 285753A	Connects motor to transmission
Weak agitation (clothes not moving well)	Agitator dog 80040	Helps the agitator “grab” and move

Why it matters

A targeted repair keeps a proven Kenmore washer running, avoids the learning curve of a new machine, and often fixes the exact failure point instead of replacing the whole appliance.

What to check first (quick, no-tools steps)

• Confirm the washer is level and the front leg nuts are tight (reduces vibration).
• Verify water faucets are fully on.
• If it will not spin, test by closing the lid firmly and listening for a click at the lid switch area.
• If it will not drain, listen for pump noise during drain.
• Review operating and troubleshooting guidance in the 11026901691 owner's manual.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For Kenmore model 11026901691, staying within the rated load size, using the right water level, and following the care steps in the 11026901691 owner's manual helps you reach the upper end of that range.

What affects washer lifespan most

• Overloading (stresses the drive system, clutch, and gearcase)
• Out-of-balance loads (increases vibration and tub wear)
• Water quality (sediment can shorten inlet valve life)
• Drain restrictions (overworks the drain pump)
• Lid switch wear (can stop spin and cause repeated restarts)

Common wear items we see on this style of Kenmore top-load washer

If performance changes over time, these parts are frequent culprits on direct-drive Kenmore washers like 11026901691:

Symptom	Often related part	What you notice
Won’t spin or stops mid-cycle	Lid switch	Lid must be closed to spin; cycle may stall
Won’t drain or drains slowly	Drain pump	Water left in tub, humming, slow emptying
Agitates poorly	Agitator dog	Agitator “slips” or only moves one direction
No agitation/spin but motor runs	Coupling	Burning rubber smell, intermittent drive

Helpful model-matched parts:

• Washer lid switch WP3949238
• Washer drain pump WP3363394
• Agitator dog 80040
• Coupling 285753A

Maintenance steps that extend life

• Level the washer and keep all feet firmly on the floor.
• Use HE detergent only if your detergent label calls for it; avoid oversudsing.
• Don’t pack the basket tight; allow clothes to move freely.
• Periodically check fill hoses for bulges or leaks and replace as needed.
• Keep the lid area and top of the tub clean to reduce residue and odors.

Why it matters

A washer that is overloaded or forced to run with draining or balance problems wears out the drive components faster. Catching early symptoms helps prevent secondary damage to higher-cost parts like the gearcase.

Last updated: February 2026