Kenmore 66517579200 undercounter dishwasher Parts

Yes. We still support Kenmore dishwasher parts, including for Kenmore model 66517579200, as long as the part is still manufactured and available. The key is matching the exact model number so you get the correct fit for items like racks, seals, pumps, and electrical parts.

How to make sure you order the right part

Use your full model number (for this unit: 66517579200) and confirm the part’s location and description in the exploded views and parts list in the 66517579200 owner's manual.

Common ways we help you match parts:

• Confirm the model tag information before ordering
• Compare the part name and where it installs (door, tub, sump, rack)
• Check for left vs. right side differences (hinges, links, stops)
• Verify electrical parts by symptom (no power, won’t start, dead control)
• Use the installation instructions for hookup-related items like drain routing

Parts you can still commonly replace on 66517579200

These are examples of parts currently listed for this model that cover frequent repairs:

Repair need	Example part for this model	What it affects
No drain or leaking at drain connection	Dishwasher drain hose 8269144A	Draining, leaks under sink
Poor wash or loud circulation	Dishwasher pump and motor assembly W10782773	Wash pressure, noise
Door leaks	Gasket W11196317	Water sealing at the door
Upper rack won’t roll smoothly	Dishwasher dishrack roller assembly, upper WP8268655	Rack movement
Dead dishwasher or intermittent power	Fuse 8193762	Power protection

Why it matters

Kenmore dishwashers are built with model-specific components, so “close enough” parts often cause leaks, poor cleaning, or installation problems. Using the correct 66517579200 part match helps restore normal wash performance and prevents repeat repairs.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517579200 is usually worth it when the fix is a wear item (seal, hose, fuse, rack parts) or the repair cost is modest compared with replacement. It becomes less worthwhile when multiple major components fail at once.

Quick decision checklist

• If the dishwasher is under 10 years old, repairs are typically the better value.
• If the repair is under about 50% of the cost of a comparable new dishwasher, repair usually makes sense.
• If you have leaks at the door or tub edge, start with seals and gaskets before assuming a major failure.
• If it won’t power on, check the house breaker first, then test the thermal fuse.
• If it won’t drain, inspect the drain hose routing and air gap (if equipped).

Common repairs that are often worth it (66517579200)

Symptom	Often-repaired part	Why it’s a good first step
No power, dead control	Fuse 8193762	A failed fuse can stop the dishwasher completely and is cheaper than control replacement.
Water on floor near door	Gasket W11196317	Door sealing issues are common and can look like bigger leaks.
Not draining or slow drain	Dishwasher drain hose 8269144A	Kinks, clogs, or improper routing can prevent draining.
Poor wash, loud grinding	Dishwasher chopper assembly W10083957V	A worn chopper can reduce cleaning and strain the wash system.

Why it matters

A targeted repair keeps your Kenmore 66517579200 running for years and avoids replacing a full undercounter dishwasher for a single failed part. The warranty section in the 66517579200 owner’s manual also highlights that some components had longer coverage when new, which is a good reminder to focus on the most likely wear items first.

What we recommend before you decide

• Review troubleshooting and care steps in the 66517579200 owner’s manual.
• Confirm proper installation basics (drain routing, air gap guidance) in the 66517579200 installation guide.
• Price out the top likely parts first (fuse, door seal, drain hose) before considering a pump or motor.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label on the dishwasher itself. For model 66517579200, check the label location shown in the Parts and Features section of the owner's manual.

Where to look on the dishwasher

On undercounter dishwashers like Kenmore 66517579200, the model/serial label is typically in one of these spots:

• Along the inner edge of the door (left or right side)
• On the top edge of the door, visible when the door is open
• On the tub frame just inside the door opening
• Occasionally on the side wall of the tub near the front

How to confirm you have the right number

Use the full model number exactly as printed on the label (including all digits). This helps match the correct diagrams and parts list.

• Open the door fully and use a flashlight
• Wipe the label gently if it is cloudy or spotted
• Write down both the model number and serial number
• Compare the model number to the one you are searching (66517579200)

What the label information is used for

Label item	What it helps with
Model number	Ensures correct replacement parts and diagrams
Serial number	Helps identify production series and compatible revisions
Purchase date (your record)	Useful for maintenance history and warranty paperwork

Why it matters

Kenmore model numbers can look similar across different series. Using the exact model number from the label prevents ordering the wrong items (like a dishrack, drain hose, or door latch parts) and saves time during troubleshooting.

Last updated: March 2026