Hotpoint HSS25ASHBCSS refrigerator Parts

Most 25.6 cubic foot side-by-side refrigerators measure about 35 to 36 inches wide. For your Hotpoint HSS25ASHBCSS, use that range for planning, then confirm the exact cabinet width by measuring your unit (handles and door swing can add extra space).

Typical width you can expect

For a 25.6 cu. ft. side-by-side refrigerator, these are the most common real-world dimensions:

• Cabinet width (box only): ~35 to 36 in.
• Width with handles: often ~36 to 37.5 in.
• Recommended clearance: at least 1/8 to 1/4 in. per side (more if the opening is tight)
• Door swing space: plan extra room so doors open fully without hitting a wall

How to measure your refrigerator correctly

Use a tape measure and check these points (they can differ):

• Measure across the widest point of the cabinet (not the doors flared out)
• Measure with handles installed if you are fitting it into an alcove
• Measure at the front and at the back (floors and cabinets are not always square)
• If you have an ice and water dispenser, keep the water line from kinking when sliding the unit in

Quick planning table

What you are sizing for	What to measure	Typical result for 25.6 cu. ft.
Cutout opening	Cabinet width	35 to 36 in.
Tight alcove fit	Width with handles	36 to 37.5 in.
Usability	Door swing clearance	Extra space beyond width

Why it matters

A side-by-side that is even 1/2 inch wider than your opening can bind against cabinets, prevent proper leveling, and reduce door seal performance. Good fit also helps airflow for efficient cooling.

Related parts and upkeep that affect fit and performance

If you are moving the refrigerator to measure or reinstall it, it is a good time to handle common maintenance items:

• Replace the water filter on schedule (see g.e. refrigerator water filter MWFP)
• If water flow is weak after reinstalling, check the inlet valve (see refrigerator water valve WR57X33326)
• Purge air from the dispenser after reconnecting the water line (see how to purge air from a refrigerator water dispenser video)
• Order model-matched parts by searching HSS25ASHBCSS on Sears PartsDirect

Last updated: February 2026

A side-by-side is “better” than a French door when you want easy freezer access at eye level, narrower door swing for tight kitchens, and lots of door bins; a French door is “better” when you want wider fresh-food shelves and more flexible refrigerator storage. For your Hotpoint HSS25ASHBCSS, the best choice depends on how you use the refrigerator and freezer day to day.

Quick comparison (what most households notice)

Feature	Side-by-side (like HSS25ASHBCSS)	French door
Fresh-food shelf width	Narrower (large platters can be tricky)	Wider (better for trays and pizza boxes)
Freezer access	Convenient, items at mid-height	Often a bottom drawer; more bending
Door swing clearance	Usually needs less clearance	Often needs more clearance
Organization style	More vertical storage	More wide, open storage

Choose a side-by-side if you prioritize

• Faster access to frozen foods without bending
• Better fit in a narrow aisle or galley kitchen (less door swing)
• Lots of door storage for bottles and condiments
• Keeping freezer items more visible and organized by shelves
• A familiar layout for ice and water dispensing setups

Choose a French door if you prioritize

• Wide refrigerator shelves for party trays, sheet pans, and large leftovers
• More flexible fresh-food storage (deli drawers and adjustable zones vary by model)
• A refrigerator-first lifestyle (you use fresh foods more than frozen)

Why it matters for performance and upkeep

Layout affects how often doors stay open and how well you keep airflow clear. In any style, good airflow and clean water filtration help the refrigerator hold steady temperatures and keep ice and water tasting fresh.

If you use the dispenser a lot, staying on top of filter changes is a big win; the g.e. refrigerator water filter MWFP is a common replacement for this model family. For step-by-step guidance, we recommend how to replace the water filter in a Hotpoint refrigerator.

Parts and features you may care about (side-by-side owners)

• Ice production and dispensing: g.e. refrigerator ice maker kit WR30X10093
• Water dispensing flow issues: refrigerator water valve WR57X33326
• Warm refrigerator section complaints: refrigerator evaporator fan motor WR60X10307

You can order replacement parts from the parts list for your Hotpoint HSS25ASHBCSS, or search by model number on Sears PartsDirect.

Last updated: February 2026

You cannot determine the age of a Hotpoint appliance from the model number alone; you need the serial number. On Hotpoint model HSS25ASHBCSS, the serial number label includes a date code that tells the month and year the unit was built.

Where to find the serial number on HSS25ASHBCSS

Check the appliance data label in the most common locations for a Hotpoint side-by-side refrigerator:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the door frame when you open the refrigerator door
• Behind the toe grille (kick plate) at the bottom front
• On the back panel near the compressor area

How to read the Hotpoint serial date code

For many Hotpoint (GE-family) appliances, the first letter in the serial number is the month and the second letter is the year.

Month letter (common mapping)

Serial letter	Month
A	January
D	February
F	March
G	April
H	May
L	June
M	July
R	August
S	September

Quick checklist to avoid mix-ups

Use these tips so you do not misread the tag:

• Write down the full serial number exactly as shown (letters and numbers)
• Confirm you are reading the serial number, not the model number (HSS25ASHBCSS)
• If the label is worn, take a clear photo and zoom in to confirm characters
• If your month letter is not in the table above, use our model parts list to confirm you have the right unit and then search by serial format on Sears PartsDirect

Why it matters

Knowing the build month and year helps us match the correct refrigerator parts and revisions for your HSS25ASHBCSS, especially for common repairs involving the water system and cooling components.

If you are troubleshooting water or ice issues while you are checking the label, the parts most often involved include the g.e. refrigerator water filter MWFP and the refrigerator water valve WR57X33326.

Last updated: February 2026

If your Hotpoint HSS25ASHBCSS side-by-side refrigerator is running but not cooling, the most common causes are poor airflow (dirty condenser or blocked vents), a failed evaporator fan, a defrost system problem, or a control and sensor issue. We start with airflow checks, then test cooling components.

Quick checks we do first (no parts needed)

• Confirm the refrigerator is plugged in and the interior lights work.
• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Make sure air vents inside both compartments are not blocked by food packages.
• Clean dust from the condenser area (dirty coils can cause warm temps).
• Listen for the evaporator fan in the freezer; it should run when the compressor is running.
• Check door seals for gaps that let warm air in.

What to check next by symptom

• Freezer cold, fresh food warm: airflow problem; often the evaporator fan or an iced-up evaporator.
• Both sections warm, compressor running: condenser airflow issue, sealed system issue, or control problem.
• Heavy frost on freezer back wall: defrost failure (heater, thermostat, or related wiring).
• Temps swing up and down: temperature sensor (thermistor) or main control board issue.

Parts that commonly fix “not cooling” on this model

These are model-matched parts we typically consider after basic checks:

• Refrigerator evaporator fan motor WR60X10307 (moves cold air through the freezer and into the fresh food section)
• Refrigerator defrost heater WR51X10055 (melts frost off the evaporator during defrost)
• Refrigerator defrost bi-metal thermostat WR50X10065 (helps control defrost heating and prevents overheating)
• Ge profile refrigerator temperature sensor WR55X10025 (reports temperature to the control)
• Refrigerator main board WR55X24347 (controls compressor, fans, and defrost logic)

Fast diagnostic guide

What you observe	Most likely area	What we check
Fan not running in freezer	Evaporator fan	Fan motor, ice obstruction, wiring
Frost blanket on evaporator	Defrost system	Heater and defrost thermostat
Warm everywhere, long run times	Heat rejection	Condenser cleanliness, airflow, compressor operation
Erratic temps	Sensor/control	Thermistor readings, control board outputs

Why it matters

A “not cooling” complaint is usually an airflow or defrost issue; fixing it early prevents food spoilage and reduces strain on the compressor and control system.

For step-by-step help diagnosing the fan side of the problem, use how to fix your evaporator cooling fan. For parts ordering, use the parts list for HSS25ASHBCSS on this page, or search by model on Sears PartsDirect.

Last updated: February 2026

Yes. On a Hotpoint HSS25ASHBCSS side-by-side refrigerator, we recommend DIY replacement for many non-sealed-system parts (filters, light bulbs, ice chute parts, some fans and sensors) as long as you unplug the refrigerator first and follow safe handling steps; sealed-system and refrigerant work should be left to a technician.

Good DIY repairs vs. repairs to leave to a pro

Many common refrigerator fixes are straightforward because they involve accessible parts and basic tools.

• Good DIY candidates
  • Replacing the water filter (see how to replace the water filter in a Hotpoint refrigerator)
  • Swapping a dispenser ice chute door kit such as refrigerator dispenser ice chute door kit WR17X11653
  • Replacing a light bulb such as 40-watt appliance light bulb 40A15
  • Replacing a temperature sensor such as refrigerator temperature sensor WR55X10025
  • Replacing an evaporator fan motor such as refrigerator evaporator fan motor WR60X10307
• Leave to a technician
  • Sealed-system repairs (compressor, evaporator, refrigerant lines)
  • Electrical diagnostics beyond basic checks (control board wiring, complex intermittent faults)
  • Anything requiring refrigerant handling or brazing

Safety checklist before you start

• Unplug the refrigerator (or switch off the breaker) before removing panels or touching wiring.
• Shut off the water supply if you are working on the filter, reservoir, or inlet valve.
• Wear cut-resistant gloves around sheet metal and evaporator areas.
• Take a photo of wire connectors and screw locations before disassembly.
• Keep screws sorted by location to avoid puncturing liners or ducts during reassembly.

Quick part-planning tips (so you order once)

Use your model number HSS25ASHBCSS when selecting parts; then match the symptom to the part category.

Symptom	Common DIY checks	Parts often involved (examples)
No ice or slow ice	Water supply on, frozen fill tube, dispenser door sealing	Refrigerator ice maker kit WR30X10093, refrigerator water valve WR57X33326
Warm fridge, freezer OK	Listen for fan, check for frost buildup	Refrigerator evaporator fan motor WR60X10307, refrigerator defrost heater WR51X10055
Water tastes/flows poorly	Replace filter, purge air	G.e. refrigerator water filter MWFP

Why it matters

DIY repairs can restore cooling, water dispensing, and ice production quickly while avoiding unnecessary part swaps. The key is choosing repairs that stay within safe access areas and do not involve the sealed cooling system.

You can order replacement parts for your Hotpoint HSS25ASHBCSS from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026