Frigidaire FSE446RHS2 dryer Parts

On your Frigidaire dryer, the model number is typically printed on a rating label around the door opening. For model FSE446RHS2, check along the top edge of the door opening first, then scan the door frame area for a sticker or metal tag.

Check these common label locations in this order:

• Along the top of the door opening (most common)
• On the inside door frame (left or right side)
• On the back panel near the power cord entry
• Behind the toe grille area (if your unit has a lower access panel)

The tag usually includes both a model and serial number.

We use the exact model number to match the correct Frigidaire dryer parts and diagrams. Even small model-number differences can change which belt, thermostat, or heating component fits.

If you are ordering common wear items for this dryer, matching by model helps you land on the right part the first time, such as the belt 134503600 or the Frigidaire dryer heating element assembly 131553900.

• Copy the model number exactly as shown (letters and numbers)
• Take a clear photo of the label for reference
• If the label is worn, try shining a flashlight across it at an angle to make the print easier to read

Last updated: February 2026

Yes. Frigidaire manufactures clothes dryers, including electric and gas models, and they’re commonly sold as standalone dryers or as matched laundry pairs. If you own a Frigidaire dryer like model FSE446RHS2, we can help you identify the right replacement parts and common fixes.

Frigidaire clothes dryers are built in multiple configurations, so the best way to confirm what you have is by matching the model number on the dryer’s ID tag.

Common Frigidaire dryer types include:

• Electric vented dryers
• Gas vented dryers
• Stackable or laundry center style units (model-dependent)
• Standard capacity and compact capacity designs

Use the model number from the appliance label (not the control panel name). For FSE446RHS2, that model number is already the key identifier for parts matching.

Check these spots for the label:

• Door opening (around the frame)
• Inside the door
• Rear panel
• Side panel near the bottom

Frigidaire makes many dryer designs, and parts like a heating element, thermostat, belt, or timer must match the exact model series to fit and work correctly.

• Clean the lint screen and check airflow restrictions
• Verify the dryer is getting the correct power or gas supply
• Listen for drum movement (belt and bearing symptoms)
• Watch for overheating signs (thermal limiter or thermostat issues)
• Use brand-specific diagnostics when available

Last updated: February 2026

To remove the front panel on a Frigidaire dryer model FSE446RHS2, we disconnect power, open up the top/front fasteners, unplug the door switch wiring, then lift the front panel up and off the lower retaining tabs. This gives access to the drum, belt, and blower area.

• Unplug the dryer (or switch off the breaker); electric dryers can still have live voltage at the terminal block.
• If it is a gas dryer, shut off the gas supply valve as well.
• Pull the dryer forward so you can reach the rear and sides.
• Have a container ready for screws so nothing gets lost.
• Wear cut-resistant gloves; cabinet edges can be sharp.

1. Remove the lint screen, then remove the screws that are usually located under the lint screen opening (these often secure the top).
2. Release the top panel: use a putty knife to pop the spring clips near the front corners, then lift the top.
3. Remove the front panel mounting screws (commonly at the upper inside corners once the top is raised).
4. Disconnect the door switch wire harness (and any zip tie holding the harness to the panel).
5. Lift the front panel up and out to unhook it from the lower tabs, then set it aside.

Removing the front panel is the first step for many repairs on the FSE446RHS2, including replacing a broken drum belt, servicing drum support parts, or clearing lint buildup that can cause long dry times and overheating.

• If the drum will not turn or you find a snapped belt, replace the belt 134503600.
• If you hear grinding or rumbling from the rear drum support, consider the dryer drum bearing 131825900 or the dryer drum bearing bracket 131724301.
• If you see worn front support surfaces, inspect the dryer drum glide 137513300 and the lower felt 5303937183.

For related troubleshooting and repair direction, we recommend what are the main parts of a clothes dryer to identify components you will see once the front panel is removed.

Last updated: February 2026

If your Frigidaire FSE446RHS2 dryer stopped working, the most common causes are a loss of power to the dryer, a door not fully latching, or an overheating safety device opening (thermal limiter or high-limit thermostat). Start with the simplest checks first, then test heat and motor circuits.

• Confirm the dryer has power: check the breaker (electric dryers often use a 2-pole breaker) and the outlet.
• Make sure the door closes firmly; a weak latch can prevent the motor from running.
• Try a different cycle and press Start firmly; a worn start switch can fail intermittently.
• Clean the lint screen and check airflow at the outside vent hood.
• If the dryer ran hot or smelled “burnt,” suspect an overheat condition and stop using it until venting is cleared.

A “dead” dryer (no response) usually points to a power issue, timer/control issue, or an open safety device. A dryer that starts then stops often points to overheating, a failing motor, or a poor door switch/latch connection.

Restricted venting is one of the top reasons dryers shut down or blow a thermal limiter. Poor airflow makes the heater housing and drum area run too hot, which can open the high-limit thermostat or thermal limiter to protect the dryer.

• Use our Frigidaire dryer error codes reference if your control panel shows a code.
• If you suspect heat-related shutdowns, clean the entire vent run (dryer outlet to exterior hood) and re-test.
• If the drum does not turn but the motor hums, inspect the belt and drum support parts.

Last updated: February 2026