Drum glide 137513300 is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Crosley, Electrolux, Gibson and White-Westinghouse dryers and laundry centers.
Drum front glide 137513300 supports the drum on the front side and allows the drum to move smoothly. Order 2 if you need to replace both glides.
Replaces original dryer drum front glide part number 131963900.
Fits some dryers in the following series: Kenmore 417; Frigidaire AEQ, AGQ, BCE, BEF, CER, CFRE, CGR, CRE, CRG, FCE, FCG, FDE, FDG, FEF, FEQ, FER, FGF, FGQ, FGR, FRE, FRG, FSE, FSG, GCE, GCG, GLE, GLG, GSE, GSG, LCE, LCG, LEQ, LER, LFD, LGQ, LGR, NME, NMG, SGE and SGG; Crosley BEQ, CDE and CDG; Electrolux EKDR, SAGQ, SAEQ and SEQ; Gibson GEF, GER, GGF and GGR; and White-Westinghouse SER, SGR, WEQ, WER, WGQ, WGR, WWRE and WWRG.
Fits some laundry centers in these series: Kenmore 417; Frigidaire CFLE, FEX, FEZ, FFLE, FFLG, FGX, FGZ, FLEB, FLGB, FLSE, FLSG, FLXG, GCEH, GCET, GLEH, GLET, GLGH, GLGT, LEH, MEX and SFLG; Crosley CLCE and CLCG; Electrolux LGH1642; Gibson GES831; and White-Westinghouse SWSG, SWXG, WLSG and WLXG.
Frequently Bought Together
We have 15,000+ available parts
Dryer Drum Bearing Kit
Part #5303281153
In Stock
$36.47
14% OFFÂ Phone Price : $42.47
Qty
Washer Screw
Part #131205400
In Stock
$13.01
13% OFFÂ Phone Price : $15.01
Qty
Dryer Drum Felt Seal, Lower
Part #5303937183
In Stock
$19.13
9% OFFÂ Phone Price : $21.13
Qty
Dryer Idler Assembly
Part #131863007
In Stock
$45.23
12% OFFÂ Phone Price : $51.23
Qty
Frigidaire Dryer Drum Belt
Part #134503600
In Stock
$8.35
11% OFFÂ Phone Price : $9.35
Qty
Dryer Drum Support Shaft
Part #131777700
In Stock
$61.40
9% OFFÂ Phone Price : $67.40
Qty
Reviews
0 Reviews
Perfect fit easy to install
August 16, 2018|None--, Undisclosed
Easy replacement part. was harder getting the front of the dryer off than replacing with glide. Note that there are 2 halves to this glide. Will need to buy 2 if needed for full circle replacement.
Ease of InstallationVery Easy
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Very easy to install
June 04, 2018|Peter c, Virginia
Just remove top cover, ease front cover forward then slider just clips in to slots. Ease front cover forward easing drum into correct position .Now reinstall top cover. I took about 20 minutes
Ease of InstallationVery Easy
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Right part-Broken tab - Still worked.
December 27, 2022|Paul, Mattawan
It was the right part but 1 of the tabs were broken. It still worked but it would be nice to know it will stay.
Ease of InstallationEasy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Actually felt seal
July 16, 2018|Vermont, Strafford Vt.
I only ordered one when three are needed. Not sure if I was brought aware of this when I ordered, Actually the same for the Teflon glide but mine do not appear worn.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
You need two (2) of them!
February 27, 2018|wacorbanaz, Bothell, WA
It's pretty straightforward to replace the dryer drum front glide. BUT, you need two of them. The dryer drum needs two but the website does not say that and they sell them by the each.
verified customer