Owner’s manual
How to find chainsaw model number?
For a Craftsman gas chainsaw, including model 358350060, we typically find the model number on a printed label or stamped tag on the saw body. Check the engine housing and handle area first, then confirm the full number in the 358350060 owner's manual.
Where to look on the chainsaw
Check these common locations on Craftsman chainsaws:
- Side of the engine/motor housing (near the starter cover)
- Rear handle area (near the throttle trigger or grip)
- Bottom of the saw body (underside of the chassis)
- Near the bar mount area (behind the clutch cover on some designs)
- On a decal near the fuel or oil tank area
How to record it correctly
Model numbers and product IDs can include letters, numbers, and dashes. For accurate parts matching:
- Copy every character exactly as shown (example: 358350060)
- Note any extra prefix/suffix numbers if present on the label
- Take a clear photo before the label gets dirty or worn
- If the label is scratched, clean it gently and use a flashlight at an angle
Model number vs. part number (quick guide)
| Item | What it identifies | Example |
|---|---|---|
| Model number | The chainsaw version for parts lookup | 358350060 |
| Part number | The manufacturer number for a replacement part | 530069216 |
| Part ID | The Sears PartsDirect identifier for a part page | 530069216 |
Why it matters
We use the model number to match the correct illustrated parts list and diagrams for your exact Craftsman chainsaw. That prevents ordering a similar-looking part that does not fit (common with fuel system and bar/chain components).
Last updated: January 2026
Should I use 40 1 or 50 1 fuel for a chainsaw?
For the Craftsman gas chainsaw model 358350060, we use the fuel mix ratio specified in the 358350060 owner’s manual. In general, 50:1 is the most common modern 2-cycle ratio, while 40:1 adds more oil for extra lubrication but can increase smoke and carbon buildup.
Quick comparison: 40:1 vs 50:1
| Mix ratio | Oil per 1 gallon gas | What you’ll notice | Best use case |
|---|---|---|---|
| 40:1 | 3.2 oz | More lubrication; more smoke and deposits | Heavy cutting, hot weather, older/worn engines |
| 50:1 | 2.6 oz | Cleaner running; less smoke | Most normal use when the manual calls for it |
How we recommend choosing the right mix
- Follow the manual’s ratio first; it is matched to the carburetor settings and engine design.
- Use fresh, ethanol-free gas when possible; stale fuel causes hard starting and poor acceleration.
- Use a quality 2-cycle oil (air-cooled, chainsaw-rated); measure accurately.
- Mix in an approved container and shake before fueling; oil separates over time.
- If the saw runs poorly after correct mixing, check for fuel delivery issues such as a cracked fuel line like the ayp lawn & garden equipment fuel line, large 530069216.
If the saw smokes a lot or loads up
- Confirm you did not accidentally mix too rich (too much oil).
- Clean or replace the air filter (restricted airflow makes it run rich).
- Inspect the spark plug for heavy carbon.
- If fuel system parts are aging, replace soft lines and ensure the tank cap vents correctly.
Why it matters
The correct gas-to-oil ratio protects the piston and crank bearings while keeping the exhaust port and spark arrestor from carboning up. Running too lean on oil risks rapid engine wear; running too rich increases deposits and can reduce power.
Last updated: January 2026
What is the Craftsman 358350060 42 cc 2-cycle gas 18 chainsaw?
The Craftsman 358350060 is a 42 cc, 2-cycle gas chainsaw commonly sold with an 18-inch bar and chain; it is designed for general cutting tasks like limbing and firewood. For the exact operating features and maintenance specs for your unit, use the 358350060 owner's manual.
What this chainsaw is built to do
This model class is typically used for homeowner and light property-maintenance work where you want a balance of power and portability.
- Cutting firewood rounds and small logs
- Limbing and storm cleanup
- Felling small trees (within your skill level and safety practices)
- General yard and property maintenance
- Occasional use with routine upkeep (air filter, spark plug, fuel system)
Key specs you will see referenced
Exact configurations can vary by production run, but these are the core identifiers customers use for the Craftsman 358350060.
| Spec | What it means | What to check |
|---|---|---|
| 42 cc engine | Engine displacement | Labeling on the saw and manual specs |
| 2-cycle gas | Requires fuel and oil mix | Fuel mix ratio in the manual |
| 18-inch bar | Typical cutting length | Bar stamp and chain packaging |
| Chain brake | Kickback safety feature | Proper engagement and release |
Parts and maintenance that keep it running
If you are refreshing an older saw, these are common service items that affect starting, idling, and cutting performance.
- Replace cracked or hardened fuel line to prevent air leaks and fuel starvation
- Keep the bar and chain oiled; a dry chain overheats quickly
- If it will not oil the bar, inspect the oiling system components
- If it starts then dies, focus on fuel delivery and carburetor condition
Helpful model-matched parts include the fuel line, large 530069216 and the chainsaw oil pump 530071259.
Why it matters
Knowing the exact model (358350060) helps you match the correct bar, chain, and fuel system parts; it also ensures you follow the right fuel-mix and maintenance intervals so the saw starts reliably and cuts safely.
Last updated: January 2026
What kind of gas goes into a Craftsman chainsaw?
For the Craftsman 358350060 gas chainsaw, we use fresh unleaded gasoline mixed with 2-cycle engine oil (2-stroke oil) at the ratio listed in the 358350060 owner's manual. Using the correct fuel mix helps the carburetor, fuel lines, and engine stay protected and start reliably.
Recommended fuel and mix basics
- Use fresh, clean unleaded gasoline (most owners use regular pump gas).
- Mix gasoline with 2-cycle engine oil made for air-cooled 2-stroke engines.
- Mix only what you will use soon; old fuel is a top cause of hard starting.
- Use an approved fuel container and shake the mix before refueling.
- Never run straight gas in a 2-cycle chainsaw; it needs oil in the fuel for lubrication.
Quick mixing guide (common ratios)
Most Craftsman 2-cycle chainsaws use a 40:1 or 50:1 mix; the exact ratio for model 358350060 is in the manual.
| Mix ratio | Gasoline | 2-cycle oil |
|---|---|---|
| 50:1 | 1 gallon | 2.6 oz |
| 40:1 | 1 gallon | 3.2 oz |
If the saw runs poorly after fueling
Wrong mix ratio or stale fuel often shows up as hard starting, surging, or stalling. Check these items in order:
- Drain old fuel and refill with a fresh, correctly mixed batch.
- Inspect the fuel cap seal and venting; replace the fuel tank cap 580940901 if it will not seal properly.
- Check for cracked or soft fuel lines; replace the ayp lawn & garden equipment fuel line, large 530069216 if it is leaking or collapsing.
- If it still will not run cleanly, a carburetor service may be needed (diaphragms and gaskets can stiffen over time).
Why it matters
A 2-cycle engine depends on the oil mixed into the gasoline to lubricate internal parts. The correct mix ratio reduces scoring, overheating, and premature wear, and it also helps the carburetor meter fuel consistently.
Last updated: January 2026
