CONFIRM THE PART FITS
Part Information
Helpful DIY instructions: Installation guide.
Special details: Carburetor 545081885 doesn't include the primer bulb; order the primer bulb for your chainsaw model separately.
This carburetor (part number 545081885) is for chainsaws.
Carburetor 545081885 mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #358351041 Craftsman gas chainsaw | 358351041 | Motor breakdown |
| Model #358351061 Craftsman gas chainsaw | 358351061 | Cylinder |
| Model #358351060 Craftsman gas chainsaw | 358351060 | Motor breakdown |
| Model #358351141 Craftsman gas chainsaw | 358351141 | Cylinder |
| Model #358351040 Craftsman gas chainsaw | 358351040 | Shield/cylinder/crankshaft |
| Model #358352161 Craftsman gas chainsaw | 358352161 | Engine |
| Model #358351140 Craftsman gas chainsaw | 358351140 | Motor breakdown |
| Model #358352160 Craftsman gas chainsaw | 358352160 | Cylinder |
| Model #1975 TYPE 6 Poulan gas chainsaw | 1975 TYPE 6 | Cylinder/shield-cylinder |
| Model #358360830 Craftsman gas chainsaw | 358360830 | Cylinder/shield/carburetor |
Reviews
I will purchase again
Chainsaw works great with the new carb. With the help of a sears tech I was able get the correct part.
JOHN H, Bath, NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Carb replacement
Easy to install, worked well but had to adjust the high speed adjustment about 1/8 turn out.
Old g, Vonore, tn
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
What I was looking for
Had an older craftsman chainsaw that wouldn't start easily and when it did it wouldn't idle. Decided to replace the carb I believe it was under $30. Solved my problems. Now it starts right up and idles fine.
Bwdriscoll, Boston, ma
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Completely wrong carb
This carb will not work on my chainsaw. Rechecked part number on Sears site, original number was changed and this carb is incorrect. Not worth the cost of shipping to send back.
Steve, Florida
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not as described!
I asked the chat line if it came with a primer bulb , they assured me it did , and it did not ! Now I have to wait for more parts !
Bob61, Florida
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Mostly straightforward
It wasn't exact carb as stated. Required slight modification to filter housing. Just a little plastic sanding with dremel tool to allow throttle to work properly
Bob61, Oklahoma
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect Fit
Fast delivery. Part was exactly what I needed and works like a charm!
Phil D, Newark, Delaware
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Just What I Needed
The carburetor and fuel lines were easy to install and just what I needed to get my chainsaw running after sitting for several years.
Easyrider, Atlanta, GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend