Amana AFD2535DES refrigerator Parts

A top-mount refrigerator has the freezer on top and the fresh-food section below; a bottom-mount (like the Amana AFD2535DES) puts the freezer on the bottom so everyday refrigerated items sit higher and are easier to reach. Check the AFD2535DES owner's manual for layout and installation clearances.

• Ergonomics: Bottom-mount designs reduce bending for milk, produce, and leftovers.
• Freezer style: Bottom-mount units commonly use pull-out baskets and drawers.
• Door swing and space: Both styles need clearance; for AFD2535DES we recommend measuring the opening and allowing about 1/2 inch at the top and 1/2 inch behind for airflow, as outlined in the manual.
• Moving and install: Many bottom-mount installs are easier if you remove doors or drawers when navigating tight hallways.

Use these practical guidelines from the manual when planning either style, especially a bottom-mount:

• Keep the refrigerator indoors and away from heat sources.
• Avoid locations below 55°F or above 110°F.
• Measure the opening carefully; flooring can reduce usable space.
• Leave airflow clearance (commonly 1/2 inch top and 1/2 inch behind).
• Level the cabinet for best door sealing and cooling performance.

Choosing top-mount vs bottom-mount affects comfort, organization, and how well the refrigerator fits your kitchen opening. Proper clearance and leveling also help prevent warm spots, moisture issues, and door-seal problems over time.

Last updated: February 2026

Bottom-mount refrigerators like the Amana AFD2535DES put the fresh-food section at eye and waist level, so we reach everyday items with less bending. The freezer stays below, which helps keep frequently used shelves more accessible and makes organizing fresh food simpler.

• Less bending for milk, produce, and leftovers because the refrigerator compartment is on top
• Easier meal prep and organization since most-used items sit at a comfortable height
• Better visibility of fresh food, which can reduce forgotten items and odors
• Freezer storage is still roomy, but used less often for many households
• Good fit for kitchens where you want quick access to the refrigerator section

A bottom-mount design does not automatically use less energy, but it supports habits that help the refrigerator run efficiently.

• We open the fresh-food door more often than the freezer; shorter, quicker openings reduce temperature swings
• Better shelf visibility can reduce “door-open time” while searching
• Proper installation clearances help airflow and cooling performance

For the AFD2535DES, we recommend following the spacing and leveling guidance so doors seal well and air circulates properly.

• Allow about 1/2 inch clearance at the top and about 1/2 inch behind the rear machine compartment cover for airflow
• Avoid installing near heat sources (ovens, radiators) when possible
• Keep the refrigerator in a normal indoor temperature range (roughly 55 F to 110 F)
• Level the refrigerator to help doors align and close consistently

For the exact procedures and clearances for your unit, use the AFD2535DES owner's manual.

Most households use the refrigerator section far more than the freezer. A bottom-mount layout is designed around that routine, improving comfort, visibility, and everyday convenience without changing how you store food.

Last updated: February 2026

A bottom-mounted (bottom-freezer) refrigerator keeps the freezer compartment on the bottom and the fresh-food section on top. On the Amana AFD2535DES, the fresh-food area uses French doors, and frozen food is stored in a lower pull-out drawer or basket system.

A bottom-mount design is defined by freezer placement, not by the style of the refrigerator doors. You will typically see:

• Fresh-food shelves and bins positioned higher for easier reach
• A lower freezer drawer with baskets for organizing frozen items
• Separate temperature controls for the refrigerator and freezer compartments
• Door gaskets and a center mullion/flipper area that help seal the fresh-food doors
• Airflow that circulates cold air through both compartments

Your AFD2535DES combines a bottom freezer with French doors on top. The AFD2535DES owner's manual also describes touch temperature controls and typical setup guidance:

• Control range: 1 through 7 (7 is coldest)
• Initial setting: 4 for refrigerator and 4 for freezer
• Let temperatures stabilize 8 to 12 hours before loading food
• Adjust only one number at a time; then allow 24 hours to stabilize

Knowing the layout helps with everyday use and troubleshooting. For example, warm temperatures can come from frequent door openings, poor door sealing, or blocked airflow, and the fix often starts with correct control settings and good organization.

Last updated: February 2026