Kenmore 66513223N413 dishwasher Parts

Yes. We still carry replacement parts for Kenmore dishwashers, and for model 66513223N413 you can match parts by model number to get the correct fit for common repairs like draining issues, leaks, rack problems, and heating or wash performance.

How to make sure you get the right part

• Use the full model number 66513223N413 (from the rating label) when searching.
• Match the part by function and symptom (drain, fill, heat, latch, rack movement).
• Compare your original part’s markings to the replacement listing when possible.
• Use the diagrams and part lists in the 66513223N413 owner’s manual to confirm component names.
• If you are installing a built-in dishwasher or replacing hoses/valves, follow the 66513223N413 installation guide for connection and routing requirements.

Common Kenmore dishwasher parts people replace

Here are model-matched examples that are commonly needed on 66513223N413:

Symptom	Part to check/replace	Example model-matched part
Won’t drain or drains slowly	Drain pump, drain hose	Dishwasher drain pump WPW10348269
Leaks at the door	Door seal	(Door seal varies by location and leak point)
Upper rack won’t stay level or adjust	Rack adjuster	Dishwasher rack adjuster W10712395
Poor drying or water not heating	Heating element	Element assembly W10703867
Not filling or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771

Why it matters

Kenmore dishwashers are built to run for years, but normal wear items (like rack hardware, seals, and pumps) eventually fail. Using the exact model number keeps you from ordering a look-alike part that does not mount correctly, leaks, or causes poor cleaning.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher is usually worth it when the problem is a common wear item or mid-priced part and the tub is in good shape; for Kenmore model 66513223N413, many fixes (rack hardware, hoses, valves, pumps) restore reliable cleaning for far less than replacement.

Quick way we decide: repair vs replace

• Repair when the dishwasher still cleans well overall and the issue is isolated (leak, drain, rack problem, latch).
• Replace when multiple major systems are failing (repeated leaks plus poor washing plus electrical issues) or the tub is damaged.
• Repair when you can confirm the symptom and access steps in the 66513223N413 owner's manual.
• Replace when repair cost approaches the price of a comparable new dishwasher.
• Repair when the fix improves safety and performance (door sealing, proper draining, correct filling).

Typical repair costs: what counts as “major” on this model

Repair type	Common symptom	Example part for 66513223N413	Usually worth it?
Rack hardware	Upper rack won’t stay level, wheels pop off	Dishwasher rack adjuster W10712395	Yes
Drain system	Water left in bottom, won’t drain	Dishwasher drain pump (WPW10348269)	Often
Fill system	No/low water entering	Dishwasher water inlet valve (W11175771)	Often
Heating/drying	Poor drying, cool wash	Heating element (W10703867)	Depends
Controls	Dead panel, erratic operation	Electronic control board (W11108143)	Depends

Why it matters

A targeted repair keeps your 66513223N413 running as designed (proper fill, wash pressure, heating, and draining). That protects dishes, prevents repeat clogs or leaks, and avoids replacing a dishwasher that still has years of service life left.

What to check first (fast, no parts)

• Confirm the door closes and latches firmly.
• Clean the filter area and check for debris around the sump.
• Verify the drain hose routing and sink/disposer connection.
• Run a cycle and listen: fill, wash motor, then drain.
• Use the troubleshooting steps in the 66513223N413 owner's manual to match symptoms to likely causes.

Last updated: February 2026

The model number for your Kenmore dishwasher is printed on the model and serial number label, located on the tub frame area around the door opening. Open the door and look along the inside edge of the tub, then match what you see to the format shown in the owner's manual.

Where to look on the dishwasher

Check these common label locations on Kenmore 665-series dishwashers:

• Along the left or right inner tub frame at the door opening
• On the top edge of the tub opening (visible with the door open)
• Near the front frame behind the door seal area
• Occasionally on the side of the tub opening, near the hinge area

What the model number looks like

Your model number should match the exact format used in the manual for this series.

Item	What to look for	Example format
Model number	Starts with 665 and includes a suffix	665.1322…
Serial number	A longer mix of letters and numbers	Varies

Tip: Write the model number exactly as printed (including dots or extra characters) so parts like a drain pump, water inlet valve, or user interface match correctly.

Why it matters

We use the model number to pull the correct diagrams and manufacturer-approved parts for your Kenmore 66513223N413 dishwasher. That prevents ordering look-alike parts that do not fit, especially for rack hardware, pumps, and seals.

Quick checklist before you order parts

• Confirm the full model number from the label (not the control panel)
• Take a clear photo of the label for reference
• Use the model number to select parts by exact fit

Last updated: March 2026