Kenmore 79551319011 refrigerator Parts

Most Kenmore side-by-side refrigerators are about 33 inches to 36 inches wide; your Kenmore 79551319011 falls in this common size range. For the exact cabinet width (and door-clearance needs), we recommend confirming the dimensions in the 79551319011 owner's manual.

Side-by-side refrigerators are commonly built in a few standard widths. Use this as a planning guide for a replacement, remodel, or moving the unit.

• 33 in. class: common for tighter kitchens
• 36 in. class: most common full-size side-by-side width
• 42 in. class: built-in style (less common)
• Add extra space for door swing, handles, and airflow clearance

We recommend measuring in three places so you do not get surprised by trim or door alignment.

• Measure cabinet width across the back (not the doors)
• Measure overall width at the widest point on the front
• Check door swing clearance to fully open the doors
• Confirm the unit is level; a tilted cabinet can change how doors sit
• Compare your measurements to the dimensions listed in the 79551319011 owner's manual

Width is only part of fit. A refrigerator that “fits the hole” can still be hard to use if the doors cannot open far enough to slide out drawers or remove the ice bin.

Last updated: February 2026

Kenmore model 79551319011 is a Kenmore-branded side-by-side refrigerator built by LG (Kenmore uses the 795 model prefix for LG-manufactured refrigerators). For confirmation details tied to your exact unit, check the model identification information in the 79551319011 owner's manual.

You can verify the model and serial information on the appliance label and match it to your documentation.

• Open the fresh food (refrigerator) door
• Look for the identification label on the right-hand side of the refrigerator compartment
• Confirm the model number reads 79551319011
• Record the serial number for parts lookup and service history
• Keep the info with your purchase date for future reference

Kenmore is a brand name; different manufacturers have produced Kenmore appliances over the years. For refrigerators, the 795 prefix is commonly associated with LG-built Kenmore units.

Knowing the manufacturer behind the Kenmore badge helps us narrow down the correct design family for components like the electronic control board, ice maker assembly, and door gasket. That reduces ordering errors and speeds up troubleshooting.

If you are diagnosing dispenser or ice issues on this model family, our how to disassemble a Kenmore refrigerator dispenser guide is a practical next step.

Last updated: February 2026

The exact cubic-foot capacity for Kenmore side-by-side refrigerator model 79551319011 is listed on the model’s rating label and in the 79551319011 owner's manual. Most Kenmore 795 side-by-side refrigerators fall in the 20 to 30 cu. ft. range, depending on configuration.

Use these checks in order; they take only a minute or two:

• Check the rating label inside the fresh food section (commonly on a side wall near the crisper area).
• Look for a line that says “Capacity”, “Total volume”, or “cu. ft.”
• Confirm the model format shown in the manual (795.5131 and 795.5132 series) matches your unit.
• If the label is hard to read, take a photo and zoom in.
• Use the 79551319011 owner's manual specifications section to confirm the number.

If you need a working estimate for planning (bins, shelving, moving clearance), use this range:

Capacity affects how quickly temperatures recover after door openings, how much food you can store, and even outage planning. For example, the manual’s power-outage guidance references using dry ice per cubic foot of freezer space, so having the correct capacity helps you plan accurately.

If you are also checking capacity because cooling seems weak, confirm airflow and temperature settings first, then inspect common cooling-related parts such as the refrigerator thermistor 6500JB2002T and the evaporator fan area.

Last updated: February 2026

Most Kenmore refrigerators, including model 79551319011, last 10 to 15 years with normal household use. Consistent care (cleaning, good door sealing, and fixing cooling or ice maker issues early) is what most often determines whether you land closer to 10 years or closer to 15.

Kenmore refrigerator life varies by usage and maintenance, but these ranges are the most useful for planning:

• Average: 10 to 15 years
• Heavy use (large family, frequent door openings): closer to 10 to 12 years
• Well-maintained, stable room temps, good airflow: closer to 13 to 15 years
• Major sealed-system failure (compressor or refrigerant leak): often becomes the deciding factor

For model-specific care and cleaning guidance, follow the maintenance schedule in the 79551319011 owner's manual.

These are the highest-impact habits we recommend for a side-by-side refrigerator:

• Keep the condenser area clean so the compressor does not run excessively.
• Make sure doors close firmly and gaskets seal all the way around.
• Replace water and ice system components promptly when performance drops.
• Avoid overpacking; allow airflow at vents and along the back wall.
• After a move or power interruption, give the unit time to stabilize and cool fully.

A refrigerator that runs longer than normal (often caused by heat, airflow restrictions, or door sealing problems) puts extra wear on the compressor and cooling system. Keeping airflow clear and seals tight helps your Kenmore 79551319011 cool efficiently and last longer.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 79551319011 are cooling problems, ice maker or dispenser failures, water leaks, excess frost, door sealing issues, and unusual noises. Many of these trace back to airflow restrictions, dirty condenser coils, or a door that is not sealing fully.

• Not cooling or warm temperatures: dirty condenser coils, blocked vents, door left ajar, heavy door opening
• Compressor runs too much: warm room, frequent door openings, dirty condenser coils (the manual notes longer run time can be normal, especially in warm conditions)
• Ice maker not working: freezer temperature too warm, ice bin out of position, water supply issue
• Water leaking or puddles: clogged/iced drain system, loose water line connections, defrost drain issues
• Frost buildup: door not closing properly, frequent door openings letting humid air in
• Lights not working: burned-out bulb (replace with same wattage, size, and shape; unplug first)

1. Confirm doors close firmly and nothing is blocking shelves or bins.
2. Clean condenser coils (dirty coils make the compressor work harder).
3. Set temperatures back to normal and give the unit 24 hours to stabilize.
4. Check gaskets for sticking; clean the gasket and mating surface.
5. If you see water under the unit, inspect the drain path and drain tube.

Most “big” refrigerator complaints start as small efficiency problems. A door that does not seal, dirty coils, or restricted airflow can cause warm temps, frost, and long run times that stress the cooling system.

For model-specific operating guidance, cleaning, and troubleshooting steps, use the 79551319011 owner's manual.

Last updated: February 2026

Kenmore model numbers are read as a full prefix plus a base model plus a suffix; for Kenmore refrigerator model 79551319011, the 795 prefix identifies the manufacturer family, and the remaining digits narrow down the exact design and feature set. Use the complete model number when ordering parts or checking specifications in the 79551319011 owner's manual.

For Kenmore side-by-side refrigerators like 79551319011, the identification label is located on the right-hand side of the refrigerator compartment (inside the fresh food section). This is the best place to confirm the exact model before you buy a part.

• Open the refrigerator (fresh food) door
• Look along the right interior wall for the ID label
• Write down the full model number and serial number
• Match every digit when searching parts (no missing zeros)
• Keep the info with your purchase date for service records

Kenmore model numbers usually follow a predictable pattern. The most important rule is to use the entire number exactly as printed.

The prefix helps ensure you get parts that fit your exact platform. For example, a water system or dispenser component can differ between Kenmore refrigerator families even if the doors and shelves look similar.

If you are troubleshooting a dispenser or ice issue and need a model-matched component, we use the model number to confirm fit for parts such as the refrigerator auger motor EAU59551204.

One digit off can mean the wrong door gasket, control board, or ice maker component. Using the full 79551319011 model number improves fit, reduces returns, and speeds up repair.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 79551319011, the model number is printed on the identification label inside the fresh food (refrigerator) compartment, on the right-hand side. The same label also lists the serial number.

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the right interior wall of the refrigerator compartment
• Check near the front edge where the door gasket meets the cabinet
• Use a flashlight; the label can be easy to miss in low light
• Write down the model number and serial number exactly as shown

Most Kenmore refrigerator ID labels include both fields. Use this as a quick checklist:

We use the model number to match the correct Kenmore parts diagrams and compatible replacements (for example, dispenser, ice maker, and cooling system parts). A single digit difference can change which parts fit.

Your model and serial number are meant to be recorded for future reference. The location and format details are shown in the 79551319011 owner's manual.

Last updated: February 2026