Husqvarna YTH2348-917287561 tractor Parts

The Husqvarna YTH2348-917287561 is typically equipped with a Briggs & Stratton Intek OHV V-twin (twin-cylinder) gasoline engine. For the exact engine family and spec numbers used on your tractor, match the engine ID tag to the listings in the owner's manual.

How to confirm the exact engine on your tractor

We recommend verifying the engine by its ID tag because the same tractor model can be built with different engine spec codes.

• Lift the hood and locate the engine ID label (often on the valve cover or blower housing)
• Record the model, type, and code (or spec) from the label
• Compare those numbers to the engine information section in the owner's manual
• If you are ordering parts, use the tractor model number YTH2348-917287561 plus the engine ID numbers
• If the label is dirty, wipe it gently so the full code is readable

Common engine description you will see for this model

Most YTH2348 tractors in this series are described as:

Item	What it means	Why you care
Briggs & Stratton Intek	Engine family/line	Helps narrow tune-up and ignition parts
OHV	Overhead valve design	Impacts valve cover, gasket, and service procedures
V-twin	Two-cylinder layout	Affects spark plugs, coils, and starting behavior

Why it matters

The engine model-type-code determines the correct maintenance parts (spark plugs, air filter, fuel filter) and troubleshooting steps for starting, charging, and ignition issues. Using the engine ID prevents ordering the wrong parts.

Related DIY help we use for engine symptoms

If your tractor clicks, cranks, or will not start, follow the diagnostic flow in riding lawn mower engine clicks but doesnt turn over video.

Ordering parts

You can order replacement parts for Husqvarna YTH2348-917287561 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Husqvarna riding mowers use engines from several manufacturers depending on the exact model and production run. For the Husqvarna YTH2348-917287561, the engine brand and model are listed on the engine ID label and in the owner's manual.

How to identify the engine brand on YTH2348-917287561

Use these quick checks (no disassembly needed):

• Look for the engine ID label on the engine shroud or valve cover; it lists the engine manufacturer and model/type code.
• Check the mower product label (often under the seat or on the frame) for engine details.
• Match the label info to the manual; the manual typically lists engine family and service specs.
• If the tractor clicks but will not crank, confirm the engine is free to turn before chasing electrical issues.

Common engine brands you may see in Husqvarna riders

Husqvarna has commonly paired riding mowers with these engine brands over the years:

Engine brand	Where you’ll usually see it	What to record from the label
Briggs & Stratton	Many residential riders	Model, type, code
Kohler	Many residential and premium riders	Model, spec, serial
Kawasaki	Some higher-end riders	Model, spec, serial

Why it matters

The engine brand determines the correct tune-up parts and service specs (spark plug type/gap, oil filter style, air filter, fuel filter, and sometimes starter/charging system details). It also helps when diagnosing no-start or no-crank problems.

Related troubleshooting we recommend

If you are diagnosing a starting issue while checking the engine label, these steps help narrow it down:

• Verify the battery is charged and terminals are clean and tight.
• If you hear a single click, test the lawn tractor starter solenoid 582042802.
• If the dash powers up but nothing happens in START, inspect the Husqvarna lawn tractor ignition switch 532193350.
• Confirm the PTO is off and brake is fully set (safety interlocks can prevent cranking).
• Follow our video steps in riding lawn mower engine clicks but doesnt turn over video.

You can order replacement parts for your Husqvarna YTH2348-917287561 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

For the Husqvarna YTH2348-917287561 riding lawn tractor, the deck size is 48 inches. This is the cutting deck width you use to match blades, belts, and deck-related adjustments; confirm your exact deck configuration in the YTH2348-917287561 owner's manual.

How to confirm you have the 48-inch deck

We recommend checking at least one of these identifiers on your tractor:

• The deck model/serial label on the mower deck (usually on the top surface or near the discharge chute)
• The parts diagram and deck section in the YTH2348-917287561 owner's manual
• The deck shell width and blade count (48-inch decks commonly use multiple blades)
• The existing deck belt routing decal (if present)

Parts that commonly match deck size

Deck size matters most when you are replacing deck drive components or correcting cut quality. On this model page, a common deck-related component is the mandrel (spindle) assembly.

• Lawn tractor mandrel housing 587819701 (mandrel/spindle housing used in the deck drive system)
• Gauge wheels help control deck height and reduce scalping on uneven ground
• Idler pulleys and hardware affect belt tension and tracking

Quick reference

Item	What it affects	Why deck size matters
Deck assembly	Cutting width and blade layout	Deck size defines the whole deck platform
Mandrel (spindle)	Blade rotation and deck drive	Must match the deck’s mounting and pulley setup
Belt routing	Blade speed and engagement	Belt length and path vary by deck size

Why it matters

Using the correct 48-inch deck specification helps you choose compatible deck parts (mandrels, pulleys, belts, gauge wheels) and set deck level correctly for an even cut. For step-by-step deck leveling and cut-quality tips, use how to level a riding lawn mower deck for an even cut video.

If you are ordering parts beyond what is listed for this model, we recommend searching by the full model number YTH2348-917287561 on Sears PartsDirect.

Last updated: February 2026

For the Husqvarna YTH2348-917287561 lawn tractor, “part numbers” means the individual replacement numbers for each component on the machine (belts, pulleys, deck parts, steering parts, electrical parts, and hardware). The correct part number depends on the exact part you need and where it fits on your tractor; use the parts diagrams and the YTH2348-917287561 owner's manual to match the right number.

Common part numbers you may see for this model

These are examples of part numbers used on the YTH2348-917287561 parts list; your repair determines which one applies:

• 532187281: mandrel housing (mower deck spindle housing)
• 532130969: ground drive belt (1/2 x 94-in)
• 532194327: idler pulley
• 532192507: starter solenoid
• 532193350: ignition switch
• 532124959: flange bearing

If you already know the system you are working on (mower deck, ground drive, steering, starting), you can usually narrow down to the right diagram quickly.

How we recommend finding the right part number (fast)

Use this process so you do not order a look-alike part that will not fit:

• Identify the system: mower deck, ground drive, steering, electrical, or chassis.
• Compare your old part to the diagram and note any orientation differences (left vs. right, upper vs. lower).
• Confirm measurements when listed (belt width and length, pulley diameter, tire size).
• Check for related hardware you may need (nuts, bolts, bearings) while you are in the repair.
• Order by the exact part number shown for YTH2348-917287561, not by a “close” model number.

Quick examples: part name vs. part ID vs. part number

On our site you may see both a part ID (our catalog identifier) and the manufacturer part number. Both help confirm you are looking at the correct item.

Example part	Part ID	Manufacturer part number
Lawn tractor ground drive belt, 1/2 x 94-in 592855201	592855201	532130969
Lawn tractor starter solenoid 582042802	582042802	532192507
Husqvarna lawn tractor idler pulley 532194327	532194327	532194327

Why it matters

Riding mower parts are highly model-specific; a belt, pulley, or mandrel that looks right can still be the wrong length, bore size, or mounting style. Matching the diagram and part number for YTH2348-917287561 prevents repeat repairs and premature wear.

To order, start with the parts list for this model; for broader model searches and ordering tools, use Sears PartsDirect.

Last updated: February 2026

To find the year for your Husqvarna YTH2348-917287561 lawn tractor, use the model and product/serial number from the identification label and match it to the date information format shown in the YTH2348-917287561 owner's manual. That label data is what we use to confirm the correct parts and diagrams.

Step 1: Locate the model and serial (product) number label

On riding lawn tractors like the YTH2348-917287561, the ID label is typically on the frame or fender area where it stays readable during service.

• Under the seat on the fender pan
• On the rear frame near the hitch plate
• Along a left or right frame rail
• Under the hood near the chassis
• Near the engine compartment on a frame crossmember

Step 2: Use the correct date format for your label

Husqvarna has used more than one numbering format over the years; the year is not always a simple MMDDYY code at the start of the serial number. Once you have the exact characters from the label, use the manual’s identification section to interpret the date information.

Common label formats you may see

What you have	What it tells you	What to do next
Model number (YTH2348-917287561)	The exact tractor configuration	Use it to pull the correct parts diagrams
Product/serial number	Build/production details	Decode using the manual’s format for your label
Engine model/type code	Engine-specific year info	Use for engine tune-up parts matching

Why it matters

The build details help us match the right version of parts when a model has running changes. That is especially important for drivetrain and electrical items.

Parts often matched using model and ID details

If you are confirming parts after you identify the tractor, these are common replacements for this model:

• Lawn tractor ground drive belt, 1/2 x 94-in 592855201 (drive system)
• Husqvarna lawn tractor ignition switch 532193350 (starting and run circuit)
• Lawn tractor starter solenoid 582042802 (starter engagement)

You can order parts from the diagrams for your tractor, or search by model number on Sears PartsDirect.

Last updated: February 2026