Kenmore 79579993510 refrigerator Parts

Kenmore bottom-mount refrigerator model 79579993510 has a total capacity of 21.7 cubic feet. You can also confirm the capacity on the refrigerator’s rating label and in the 79579993510 owner's manual.

How to confirm the capacity on the refrigerator

• Open the fresh food (refrigerator) compartment.
• Look along the side walls near the crisper drawers for the rating label.
• Find the line for total capacity (often shown in cu. ft.).
• Verify the model number on the label matches 79579993510 exactly.

Capacity quick reference

Spec	Value
Total capacity	21.7 cu. ft.
Refrigerator type	Bottom-mount (bottom freezer)

Why it matters

Knowing the exact cubic feet helps when you are comparing replacement refrigerators, planning kitchen fit, and choosing accessories that match the design of your Kenmore unit (such as filtration and storage components).

Related maintenance parts for this model

If you are refreshing performance and odors, these are common replacements:

• Genuine Kenmore refrigerator water filter 9690 AGF80300801 (water taste, flow, ice quality)
• Lg refrigerator air filter ADQ73214408 (odor control)

Last updated: February 2026

On Kenmore bottom-mount refrigerator model 79579993510, we reset the ice maker by cycling the ice maker setting at the control panel. This model also supports an Ultra Ice boost mode (started by holding the Ice Maker button for 3 seconds), which can help increase ice production after a reset.

Reset the ice maker (control panel)

• Turn Control Lock off if it is enabled (hold Control Lock for about 3 seconds).
• Press the Ice Maker button to switch the ice maker OFF.
• Wait about 30 seconds.
• Press the Ice Maker button again to switch it ON.
• Give the refrigerator time to recover; normal ice output typically stabilizes within 12 to 24 hours.

Ultra Ice vs. a reset

Ultra Ice is a production boost, not required for a basic reset; it is useful after heavy use.

Option	How to use it on model 79579993510	What to expect
Basic reset	Ice Maker OFF, then ON	Restarts ice maker operation
Ultra Ice	Press and hold Ice Maker for 3 seconds	Boosts ice making and freezing for 24 hours (or stop manually)

If it still is not making ice

• Make sure the in-door ice bin is fully seated and not jammed with uneven ice.
• Confirm the freezer is set cold enough; most bottom-freezer units run best near 0°F.
• Replace a restricted water filter; this model uses the refrigerator water filter 9690 AGF80300801.
• After changing the filter, reset the filter indicator by holding Water Filter for 3 seconds.
• Dispense several glasses of water to purge air from the water line.

Why it matters

Cycling the ice maker setting clears many “stuck” conditions (full-bin sensing, paused harvest, or interrupted fill). Water flow restrictions from a clogged filter can also stop ice production even when cooling is normal.

For exact button locations and display icons, use the 79579993510 owner's manual.

Last updated: February 2026

Most Kenmore refrigerators, including the Kenmore 79579993510 bottom-mount style, last 10 to 15 years. With consistent maintenance (clean airflow, tight door seals, and timely part replacement), it’s common to reach the upper end of that range before major sealed-system repairs become more likely; see the 79579993510 owner's manual for care guidance.

Typical lifespan and what usually ends a refrigerator’s service life

Refrigerators most often get replaced when cooling performance drops or repair costs rise due to sealed-system issues.

• 10 to 15 years: typical service life for most modern refrigerators
• 8 to 12 years: more common when maintenance is skipped (dirty condenser, poor ventilation)
• 15+ years: achievable with good airflow, stable temperatures, and prompt repairs
• Major cost drivers: compressor, evaporator, refrigerant-related components

Component area	What it affects	When it matters most
Condenser and airflow	Overall cooling efficiency	Year-round, especially in dusty homes
Door sealing	Frost, run time, temperature stability	If you see gaps, sweating, or ice buildup
Ice and water system	Ice production, dispenser flow	After filter changes or low water flow

Maintenance that adds years (high impact)

These actions reduce run time, prevent overheating, and help the compressor avoid early wear.

• Vacuum dust from the condenser area and keep rear/bottom vents clear
• Keep doors closing squarely; avoid overloading door bins
• Set stable temps (avoid frequent warm-ups from “max cold” cycling)
• Replace filters on schedule to protect valves and ice maker flow
• Fix small issues early (rattling fan, warm spots, recurring frost)

Parts that commonly support long life

If performance is slipping, these model-matched parts are often involved:

• Refrigerator condenser coil ACG73645004 (restricted airflow and poor heat release)
• Refrigerator door gasket, right ADX72930461 (air leaks and frost)
• Refrigerator compressor TCA38091801 (no/weak cooling, loud start attempts)

Why it matters

A refrigerator that runs hotter or longer than normal uses more electricity and stresses the sealed system. Simple airflow and sealing maintenance often delays expensive repairs and helps food stay at safe temperatures.

Last updated: February 2026

On Kenmore refrigerator model 79579993510, water leaking underneath is typically caused by a clogged or frozen defrost drain, an overflowing or cracked drain pan, or a slow leak in the ice maker or dispenser water supply. Use the 79579993510 owner's manual to locate the drain path and access panels.

Quick checks we recommend

• Look for water or a sheet of ice on the bottom of the fresh food compartment.
• Pull the unit forward and inspect the floor for a trail from the back.
• Check the drain pan underneath for cracks, tipping, or overflow.
• Inspect the rear water line connection and shutoff valve for seepage.
• Check the water filter area for drips after dispensing.

Fix the most common cause: defrost drain blockage

1. Unplug the refrigerator.
2. Remove bins/shelves as needed to reach the rear interior floor and drain opening.
3. Melt ice with warm water (not boiling) and clear the drain with a pipe cleaner.
4. Flush with warm water until it drains freely into the pan.

Symptom-to-cause guide

What you notice	Most likely cause	Where to look
Water after defrosting	Clogged/frozen defrost drain	Rear interior floor, drain hole
Leak only with ice/water use	Water supply or filter area leak	Back water line, filter housing
Puddle with no dispenser use	Drain pan issue	Under unit near compressor

Parts that can be involved

If the leak is at the filter connection or right after dispensing, replace the filter with the correct part for this model, such as genuine Kenmore refrigerator water filter 9690 AGF80300801.

Why it matters

Leaks can damage flooring and can also lead to recurring ice buildup that blocks airflow and affects cooling.

Last updated: February 2026