Kenmore 10660939901 refrigerator Parts

For Kenmore model 10660939901, the most accurate way to confirm cubic feet is to look up the capacity in the 10660939901 owner's manual. If you cannot find a listed capacity, you can estimate it by measuring the usable interior space and converting cubic inches to cubic feet.

• Check the specifications section in the 10660939901 owner's manual.
• Look for a rating plate or product label inside the fresh food section (often on a side wall, ceiling, or behind a crisper drawer); it sometimes lists capacity.
• Use the model number to identify the exact product family; Kenmore 106 models are commonly Whirlpool-built, and capacity varies by configuration.
• Estimate capacity by measuring the interior (helpful when labels are missing).

1. Empty the compartment you are measuring (fresh food and freezer can be estimated separately).
2. Measure width x depth x height of the usable interior space in inches.
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

Kenmore model numbers help identify the manufacturer series (for example, 106), but they do not reliably encode the exact cubic-foot capacity across all revisions. The same series can include multiple cabinet sizes, door styles, and trim packages.

When you measure, exclude areas you cannot actually use (rounded corners, air ducts, and thick shelf supports). This gives a more realistic capacity than measuring the outer cabinet.

Last updated: January 2026

Most refrigerators, including Kenmore model 10660939901, need about 1 inch of open space above the cabinet (not the hinge) so heat can escape and the unit can run efficiently. For the most accurate installation clearances for your kitchen setup, use the 10660939901 manual.

Use these spacing targets unless your manual specifies something different:

• Top: about 1 inch above the refrigerator case
• Sides: 1/8 inch to 1 inch per side (more space helps airflow)
• Back: 1 to 2 inches to protect the water line and improve ventilation
• Front: enough room for doors to open fully and for drawers to slide out

Clearance is part of the refrigerator’s cooling system. Too little space can trap heat, increase run time, and make temperature control harder in both the freezer and fresh food sections.

• Clean dust from the condenser area regularly to reduce heat load
• Avoid pushing the cabinet hard against the wall; keep at least the back clearance
• Confirm doors can open wide enough to remove bins and shelves
• If the unit is hard to roll out for cleaning, replacing worn rollers can help (example: cabinet roller WPW10475495)

Last updated: January 2026

On the Kenmore 10660939901 top-mount refrigerator, the top section is the freezer compartment (often just called the freezer). It’s the area designed to keep foods frozen and to support ice production if your unit has an ice maker.

• Maintains temperatures cold enough to keep food frozen solid
• Circulates cold air that also helps cool the fresh food section below
• Houses key cooling components (behind interior panels) such as the evaporator area
• Often includes the ice maker mounting location (if equipped)

Knowing the correct name helps you match symptoms to the right system. For example, if the freezer is cold but the refrigerator section is warm, we typically focus on airflow issues like the evaporator fan.

• Refrigerator evaporator fan motor WP2315539 (moves cold air through the freezer and into the refrigerator section)
• Defrost components (help prevent frost buildup that blocks airflow)
• Door gaskets and door alignment (help prevent warm air leaks)

For the exact compartment layout, control locations, and feature descriptions for this model, use the 10660939901 owner's manual.

Last updated: January 2026

Yes. For a Kenmore Elite refrigerator like model 10660939901, the most reliable reset is a power reset: unplug the refrigerator (or switch off the breaker) for about 5 minutes, then restore power. This clears many control glitches after a power outage or temperature change.

• Unplug the refrigerator or turn off the circuit breaker.
• Wait 5 minutes (10 minutes is fine if the issue is persistent).
• Restore power.
• Allow 24 hours for temperatures to fully stabilize.
• If the display is on but cooling is still off, confirm the temperature settings in the 10660939901 owner's manual.

A reset helps when the control board is “stuck” (display oddities, intermittent cooling, lights acting up). It will not fix a failed component like an evaporator fan motor, defrost heater, or compressor.

• Make sure the doors fully close and gaskets seal all the way around.
• Confirm the freezer and refrigerator vents are not blocked by food packages.
• Listen for the evaporator fan in the freezer; if it is silent when the door switch is pressed, the fan circuit may be the issue.
• Check for heavy frost on the freezer rear panel (a classic defrost failure sign).
• If you suspect a defrost problem, the refrigerator defrost bi-metal WPW10225581 and refrigerator heater WP2263749 are common service parts on this style of Kenmore 106 top-mount.

A proper reset is a fast way to rule out a control glitch before replacing parts. If temperatures do not recover after a reset and basic airflow checks, the problem is usually mechanical (fan, defrost system, or sealed system), not the settings.

Last updated: January 2026