Kenmore 10670212410 refrigerator Parts

For Kenmore model 10670212410, the cubic-foot capacity usually isn’t reliably “decoded” from the model number alone. The most accurate way is to confirm capacity in the product specifications section of the 10670212410 owner’s manual, or calculate interior volume by measuring usable space.

Best ways to find capacity (in order)

• Check the specifications section in the 10670212410 owner’s manual for listed capacity.
• Look for a rating label inside the fresh food compartment (often on a side wall or ceiling) that may list capacity.
• Measure the usable interior (not exterior cabinet size) and calculate cubic feet.
• If you’re comparing similar Kenmore 106 models, use the full model number (all digits) when searching specs.

How to calculate cubic feet yourself

1. Empty the compartment you’re measuring (fresh food and freezer are often calculated separately).
2. Measure usable interior dimensions in inches: height × width × depth.
3. Multiply to get cubic inches.
4. Divide by 1728 to convert to cubic feet.

Quick conversion table

What you have	What to do	Result
Inches (H × W × D)	Multiply	Cubic inches
Cubic inches	Divide by 1728	Cubic feet

Why “decoding” the model number is hit-or-miss

Kenmore model numbers (including the 106 prefix family) are primarily used to identify the product platform and configuration for parts and service. Capacity can vary within a model family, so a single digit in the model number is not a dependable capacity code.

Why it matters

Knowing cubic feet helps you compare refrigerator sizes, plan food storage, and confirm fit when replacing shelves, bins, or door components for your exact Kenmore 10670212410.

Last updated: January 2026

On Kenmore model 10670212410 (a top-mount refrigerator), the top section is the freezer compartment. It’s the colder compartment designed to keep foods frozen and, on some setups, it also houses the ice maker and related components (if equipped).

What you’ll typically find in the top (freezer) compartment

• Freezer shelves and door bins for frozen food storage
• Temperature airflow outlets that send cold air down to the fresh food section
• Evaporator area behind an interior panel (cooling coil and fan system)
• Ice maker components (only if your refrigerator has an ice maker installed)

For diagrams and compartment identification specific to this model, use the 10670212410 owner’s manual.

Freezer vs. refrigerator: quick comparison

Compartment	Common name	Primary purpose	Typical temperature
Top section	Freezer	Long-term frozen storage, ice production (if equipped)	Around 0°F
Bottom section	Fresh food (refrigerator)	Short-term chilled storage	Around 37°F

Why it matters

Knowing the correct compartment name helps when you’re ordering parts, reading troubleshooting steps, or following maintenance instructions. For example, if you’re diagnosing ice production issues, you’ll usually be working in the freezer area.

Parts you might hear associated with the freezer (if equipped)

If your 10670212410 has an ice maker installed, these freezer-related parts may apply:

• Refrigerator ice maker assembly 4317943 (makes and harvests ice)
• Refrigerator ice bin W11625904 (stores ice in the freezer)
• Refrigerator shut-off arm W10646481 (signals the ice maker to stop when the bin is full)

Last updated: January 2026

For Kenmore top-mount refrigerator model 10670212410, the correct water filter cannot be identified from the model-specific information available here because the exact filter style and filter part number vary by configuration. We recommend confirming the filter type and replacement number using the 10670212410 owner's manual.

How we recommend confirming the right filter

Use these quick checks on your 10670212410 to avoid ordering the wrong cartridge:

• Look for a filter housing in the upper-right fresh food compartment, base grille, or rear cabinet area.
• Check the existing filter label for a printed part number.
• Note the filter shape and how it locks in (twist-in, push-in, pull-down, or inline).
• If your unit has no filter housing, it may use an external inline filter or no filter at all.
• Match by model number 10670212410 first, then by the filter number printed on the old cartridge.

Common filter setups you may see (and what they mean)

Different Kenmore 106-series refrigerators can use different filter families, so the “right” answer depends on what your refrigerator is built with.

What you see on the refrigerator	What it usually indicates	What to do next
Cartridge inside the fresh food section	Internal cartridge filter	Match the number on the cartridge or manual listing
Filter in the base grille	Push/twist grille filter	Confirm the grille filter number and style
No cartridge anywhere	Inline filter or no filter	Check behind the unit for an inline filter on the water line

If water flow is weak after a filter change

A “wrong filter” is one cause, but these are also common:

• Air trapped in the water line after installation
• Filter not fully seated/locked
• Low household water pressure
• Clogged filter head or kinked supply line
• A failing inlet valve (for this model, see refrigerator water inlet valve WPW10279909)

Why it matters

Using the correct filter for your Kenmore 10670212410 helps maintain normal dispenser/ice maker flow and ensures the filter seals properly so you do not get leaks or bypassed filtration.

Related DIY help: how to replace the water filter in a Kenmore refrigerator

Last updated: January 2026