Kenmore 11028522700 washer Parts

A Kenmore washer typically lasts 10 to 15 years under normal household use. For the Kenmore 11028522700, lifespan is driven less by the model number and more by load size, installation, and routine care outlined in the 11028522700 washer user manual.

What affects lifespan the most

A washer usually reaches the upper end of its life when wear items are managed and the machine is kept balanced and leak-free.

• Avoid overloading; chronic overload strains the drive system and suspension
• Use the correct water level and temperature settings for the load
• Keep the washer level to reduce vibration and component wear
• Inspect hoses regularly and replace them on schedule
• Address small leaks or unusual noises early

Maintenance that extends life (model-relevant)

The Kenmore 11028522700 documentation calls out a key preventive step: replacing inlet hoses on a time schedule.

• Replace water inlet hoses every 5 years (helps prevent hose failure and leaks)
• Wipe up detergent and bleach spills on the cabinet to prevent corrosion
• Periodically clean the washer interior using a hot cycle and a cleaning mixture as described in the manual
• Keep loads evenly distributed to reduce off-balance spinning

Typical lifespan by usage pattern

Usage pattern	Typical lifespan	What usually shortens it
Light (1 to 3 loads/week)	12 to 15 years	Long idle periods, hose aging
Average (4 to 7 loads/week)	10 to 13 years	Overloading, vibration
Heavy (8+ loads/week)	8 to 11 years	Wear on drive, pump, suspension

Why it matters

Knowing the expected lifespan helps you decide when preventive maintenance is worth it and when a repair is likely to restore reliable operation. For example, a leak caught early can prevent damage to the drive system and bearings.

Last updated: January 2026

For Kenmore washer model 11028522700, the model number is printed on the model and serial number label located under the washer lid. Open the lid and look around the rim/underside area for a sticker or metal tag with both the model and serial numbers; our 11028522700 washer user manual also points to this location.

Where to look on this Kenmore washer

On model 11028522700, check these common label spots first:

• Under the lid on the top rim of the cabinet (most common)
• Under the lid near the tub opening (front edge or side edge)
• On the back of the washer cabinet (secondary label on some units)
• Inside the lid itself (less common)

What the label should show

The label typically includes:

• Model number (example format: 11028522700)
• Serial number
• Electrical rating information
• Sometimes a manufacturing date code

Quick ID checklist

What you see on the label	What it means	What to do next
“110.28522700” or “11028522700”	This is the model number	Use it to match diagrams and parts
A longer mix of letters/numbers	Usually the serial number	Keep it for service records
Only “110.” plus more digits	Partial model format	Write down the full string shown

Why it matters

Using the exact model number ensures you get the right Kenmore washer parts, correct troubleshooting steps, and the right installation details (like hose and drain setup). Even small model-number differences can change compatible components.

Last updated: January 2026

To unclog the drain hose on your Kenmore washer model 11028522700, unplug the washer, shut off the water, then remove the drain hose from the standpipe or laundry tub and flush it out. If draining is still slow, check the pump inlet hose and drain pump for debris using the 11028522700 installation guide.

Step-by-step: clear the drain hose safely

• Unplug the washer (avoid working around live power).
• Turn off both water faucets.
• Pull the drain hose out of the standpipe or off the laundry tub.
• Place the hose end in a bucket or shallow pan to catch water.
• Straighten any kinks and remove lint or buildup at the hose end.
• Flush the hose with hot water; for stubborn residue, soak the end in hot water and vinegar, then flush again.
• Reinstall the hose with an air gap (do not tape or seal it into the standpipe).

Also check these common clog points (model 11028522700)

A clog is often not only in the drain hose. On this direct-drive style washer, lint, coins, or small socks can lodge at the pump area.

• Inspect the hose routing for pinches behind the cabinet.
• Check the standpipe or laundry tub drain for slow household plumbing.
• If the washer hums but will not drain, inspect the pump and pump hoses.

Parts that commonly relate to “won’t drain”

Symptom	Most likely area	What to do next
Water drains slowly	Drain hose or standpipe	Flush hose; clear plumbing; reinstall with air gap
Hums but no drain	Pump inlet or pump	Check for debris; replace pump if seized
Drains but leaks	Hose connection or clamp	Reseat hose; inspect clamps and hose ends

If you find the pump is jammed or leaking, the compatible replacement for this model is the washer drain pump WP3363394.

Why it matters

A restricted drain hose can cause the cycle to stall at drain/spin, leave water in the tub, and strain the drain pump. Clearing the restriction early helps prevent repeat clogs and reduces the chance of pump failure.

Last updated: January 2026