Kenmore Elite 59676573602 bottom-mount refrigerator Parts

Common problems we see on the Kenmore Elite 59676573602 bottom-mount refrigerator include not cooling well, frost or moisture buildup, ice maker or water dispenser issues, and new or unusual noises. Many fixes start with basic checks (power, controls, airflow, door sealing) before moving to parts testing; see the 59676573602 owner's manual for model-specific troubleshooting.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: doors left open, controls set incorrectly, blocked vents, dirty condenser area, or an airflow problem (evaporator fan or damper).
• Excess frost or moisture: door not sealing, frequent door openings, or a defrost system issue.
• Ice maker not making ice or poor ice quality: new installation not fully primed, water supply issues, or water quality problems (softened water can cause issues).
• Noisy operation: normal sounds (buzzing, pulsating, hissing) or a failing fan motor, compressor start device, or loose panels.
• Runs a lot: warm room, large food load, frequent door openings, or doors not fully closed.

Quick checks we recommend first (before replacing parts)

• Confirm the refrigerator is plugged into a grounded 3-prong outlet and the outlet works.
• Check the house fuse/circuit breaker and reset if needed.
• Make sure the controls are ON and allow 24 hours after installation for full cooling.
• Verify doors close fully and gaskets are clean and making full contact.
• Listen for airflow changes when the door opens and closes (helps narrow fan or damper issues).

Parts that commonly relate to these problems on this model

Symptom	Likely system	Example part for this model
Fresh food section warm, freezer OK	Airflow/damper	Refrigerator damper control WPW10196393
Frost buildup, warm temps after icing	Defrost system	Refrigerator defrost heater WP67002493
Clicking/buzzing with no start	Compressor start circuit	Refrigerator overload release W10613606

Why it matters

Catching airflow, sealing, and power issues early prevents temperature swings that spoil food and can force the compressor and fans to run longer than necessary.

Last updated: January 2026

Most Kenmore Elite refrigerators, including the Kenmore Elite 59676573602 bottom-mount refrigerator, typically last 10 to 15 years. With consistent care (cleaning, good door sealing, and stable temperatures), it’s common to reach the upper end of that range before major sealed-system or cooling repairs become more likely.

What affects lifespan the most

• Condenser coil cleanliness (dust and pet hair make the compressor work harder)
• Door gasket condition (air leaks cause longer run times and frost issues)
• Airflow inside the cabinet (blocked vents can warm the fresh food section)
• Defrost system health (prevents ice buildup on the evaporator)
• Power quality (frequent outages or surges can stress controls and motors)

Maintenance checklist we recommend

Use these habits to help your 59676573602 run closer to 15 years.

• Vacuum and brush the condenser area regularly
• Keep door gaskets clean and fully seated; replace if torn or warped
• Leave space around vents; avoid packing food tightly against the back wall
• Replace the water filter on schedule and flush after changes (per the 59676573602 owner's manual)
• Confirm temperatures stay near 37°F (fresh food) and 0°F (freezer)

Common “end-of-life” repairs and what they usually mean

Symptom	Often points to	Typical next step
Warm refrigerator, freezer still cold	Airflow or damper issue	Check vents; inspect/replace damper if needed
Loud fan noise or no airflow	Evaporator fan problem	Inspect fan blade and motor
Heavy frost, warming temps	Defrost system issue	Test heater and defrost components
Clicking, won’t start cooling	Start device or compressor issue	Test overload/relay; evaluate compressor

If you’re troubleshooting cooling or airflow, parts that commonly apply to this model include the refrigerator damper control WPW10196393, evaporator motor WPW10128551, and refrigerator defrost heater WP67002493.

Why it matters

A refrigerator that runs longer than normal (often from dirty coils or leaking gaskets) uses more energy and puts extra wear on the compressor and evaporator fan motor. Preventive maintenance is the simplest way to extend service life and avoid expensive cooling-system repairs.

Last updated: January 2026

Kenmore Elite launched as a premium Kenmore line in the late 1990s; your specific Kenmore Elite bottom-mount refrigerator model 59676573602 was manufactured in a particular year based on its serial number, not the model name alone. Use the serial tag and the date-code guidance in the 59676573602 owner's manual to pinpoint the exact build date.

How to find the exact year for model 59676573602

On this refrigerator, the most reliable way to determine the year is to read the serial number label and decode the manufacturing date from it.

• Locate the model and serial tag (commonly inside the fresh food compartment, on a side wall, or near the crisper area)
• Write down the full serial number exactly as shown
• Compare the serial format to the date-code information in the manual
• If the label is damaged, take a clear photo and zoom in to confirm characters
• Keep the serial number handy when ordering parts like a light switch or temperature sensor

What “Kenmore Elite” means (and what it does not)

“Kenmore Elite” identifies a higher-feature Kenmore product tier; it does not identify a single release year for every Elite refrigerator.

Item	What it tells you	What it does not tell you
Kenmore Elite branding	Product tier and feature level	Exact manufacturing year
Model number 59676573602	Design family and configuration	Exact build week/year
Serial number	Actual production date code	Feature set by itself

Why it matters

Knowing the true manufacturing year helps us match the correct replacement parts and revisions for your refrigerator, especially for electrical and cooling components such as the refrigerator temperature sensor 12002355 or door and light-circuit parts.

Last updated: January 2026