Kenmore Elite 10644429603 side-by-side refrigerator Parts

Most Kenmore Elite refrigerators, including model 10644429603, typically last 12 to 15 years with normal household use. Consistent maintenance (cleaning condenser coils, keeping door seals tight, and changing the water filter on schedule) helps you reach the upper end of that range.

• Condenser coil cleanliness: Dust buildup makes the compressor run hotter and longer.
• Door gasket condition: Air leaks cause longer run times and frost issues.
• Defrost system health: A failed thermostat or heater can lead to heavy frost and poor cooling.
• Ice maker and dispenser use: High use can wear mechanical parts faster.
• Water filter maintenance: A clogged filter can reduce water flow and strain the dispenser system.

• Vacuum the condenser area every 6 to 12 months.
• Confirm both doors close firmly and evenly; adjust leveling if needed.
• Keep vents inside the fresh food and freezer sections unblocked.
• Replace the water filter on the schedule in your 10644429603 owner's manual.
• If water flow slows or tastes off, replace the filter with the correct cartridge, such as the genuine Kenmore refrigerator water filter EDR3RXD1.

A refrigerator that is running inefficiently can shorten compressor life and increase food temperature swings. Simple upkeep often prevents the most expensive failures and keeps your Kenmore Elite side-by-side cooling evenly.

Last updated: January 2026

Kenmore Elite refrigerators (including model 10644429603) are sold under the Kenmore brand; the actual manufacturer varies by model series. For 106-prefix Kenmore Elite side-by-side refrigerators, the design and parts system commonly align with Whirlpool-built platforms, which is why many compatible replacement parts are Whirlpool-sourced.

The most reliable way is to use the model and serial label and the documentation for your refrigerator.

• Find the model/serial label inside the fresh food compartment (typically on an inside wall)
• Record the full model number and serial number for service and parts matching
• Use the manufacturer prefix clues (for example, many Kenmore models starting with 106 are Whirlpool-built)
• Confirm details in the 10644429603 owner's manual

Kenmore Elite is a product line and feature tier, not a single factory or manufacturer. Sears specified the features and performance targets; different OEMs built units for Kenmore across different years and model prefixes.

Knowing who built the platform helps you match the right refrigerator parts, troubleshoot more accurately (ice maker, water filter, defrost system), and avoid ordering look-alike parts that do not fit.

If you are replacing filtration components on this model, a common match is the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026

Common problems on the Kenmore Elite side-by-side refrigerator model 10644429603 are no cooling or weak cooling, excess frost or ice buildup, and unusual operating noises. We start with airflow and power checks, then move to the defrost system, fans, and ice and water components using the 10644429603 owner's manual.

• Not cooling or warm temperatures: dirty condenser area, restricted airflow, failed evaporator fan, or a sealed-system issue
• Runs all the time: doors opened often, warm room, heavy food load, or airflow restriction (this model can run longer by design)
• Frost or ice buildup: defrost system problem, door not sealing, or blocked air return
• No ice or slow ice: water supply issue, frozen fill tube, or ice maker problem
• Noisy operation: normal valve and fan sounds, or a failing fan motor or compressor-related component

• Confirm the unit is plugged into a grounded 3-prong outlet and the outlet has power.
• Verify the temperature controls are turned on and set correctly.
• Allow 24 hours after installation for full cooling.
• Make sure doors close fully and are not being held open by bins or food packages.
• Listen for the type of noise (buzzing, pulsating, rattling) and when it happens.

Cooling and defrost problems can quickly lead to food spoilage, ice buildup that blocks airflow, and extra compressor run time. Catching the simple causes first (power, settings, airflow, doors) prevents unnecessary part replacement.

Last updated: January 2026

Kenmore Elite is a premium Kenmore product line that has been sold for decades; for your specific Kenmore Elite refrigerator model 10644429603, the most accurate “year” is the manufacture year shown by the serial number, not the Elite line launch date. Use the serial label inside the fresh food compartment to determine it (see the 10644429603 owner's manual).

We use the model and serial number label to date the refrigerator.

• Open the refrigerator (fresh food) door and look on the inside wall for the model and serial label.
• Write down the full serial number exactly as shown.
• Compare the serial format to the decoding guidance in the 10644429603 owner's manual.
• If the label is damaged, check for a secondary label near the cabinet frame.
• Keep the serial number with your records for parts ordering and service.

Different customers mean different things by “came out.” Here is the best match for parts and service.

Kenmore Elite refrigerators can have running changes during production. The manufacture date helps us match the correct revision of parts like the water filter, ice maker, or controls.

If you are replacing filtration parts, this model uses a base grille filter cartridge; a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1 (replacement filter is also referenced in the manual by part number 9030).

Last updated: January 2026