Kenmore 10657024601 side-by-side refrigerator Parts

The most common problems we see on Kenmore refrigerators like model 10657024601 are warm temperatures, water leaks, ice maker or dispenser failures, and unusual noises. Most causes trace back to airflow, defrost performance, or water supply; the 10657024601 owner's manual troubleshooting section helps pinpoint the symptom.

• Not cooling or warm temps: dirty condenser coils, evaporator fan not moving air, defrost ice buildup
• Water leaking or puddles: clogged defrost drain, loose water line, leaking inlet valve
• Ice maker not making ice: shutoff arm off, frozen fill tube, weak inlet valve, failed ice maker
• Noisy operation: normal cycling sounds, vibration, fan blade hitting ice
• Bad taste or slow water flow: restricted water filter

The manual lists several sounds that are often normal during operation.

• Verify doors close fully; clean the gasket sealing surfaces
• Keep vents clear inside both compartments
• Set typical targets: 37°F fresh food, 0°F freezer
• Allow 24 hours after adjustments or heavy loading for temps to stabilize
• If water or ice is weak, replace the filter and dispense water to purge air

• Water taste or slow flow: genuine Kenmore refrigerator water filter EDR3RXD1
• Ice maker not cycling/harvesting: refrigerator ice maker assembly 2198597
• No water to dispenser or ice maker: refrigerator inlet valve W10408179

Airflow restrictions, defrost icing, and slow water supply typically worsen over time; addressing them early helps protect food, reduce frost buildup, and prevent floor damage.

You can order replacement parts from the parts list for model 10657024601, or search by model on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657024601, a “not cooling” problem is usually caused by lost power, controls set incorrectly, blocked airflow vents, or a failed cooling-air component (like the evaporator fan). We start with airflow and control checks, then move to fans, defrost, and sealed-system issues using the owner's manual.

• Confirm the refrigerator has power and the controls are turned on.
• If it was just installed or moved, allow 24 hours to reach normal temperatures.
• Make sure food packages are not blocking the airflow vents between freezer and fresh food sections.
• Set temperatures to normal mid-range settings (setting “coldest” does not cool faster).
• Listen for the evaporator fan; it should run and may change speed when doors open.

This refrigerator is designed to move cold air from the freezer into the refrigerator section and then return air back to the freezer. When vents are blocked, airflow is obstructed and temperatures rise even if the compressor is running.

If basic checks do not restore cooling, these parts are frequently involved in side-by-side cooling complaints:

• Refrigerator evaporator fan motor WP2315549 (moves cold air through both compartments)
• Refrigerator heater WP2323198 (melts frost during defrost)
• Refrigerator defrost bi-metal WPW10225581 (helps control defrost heating)
• Refrigerator temperature control WP2315562 (regulates cooling cycles)

For ordering, we recommend using the parts list for model 10657024601 or searching by model number on Sears PartsDirect.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10657024601 has a total capacity of 21.9 cubic feet. For the most accurate confirmation for your exact configuration (shelves, bins, and ice system), we recommend checking the specifications section in the 10657024601 owner's manual.

Capacity helps us match the right parts and maintenance items for your refrigerator, and it also sets expectations for:

• How much fresh food and frozen food you can store
• How quickly temperatures recover after door openings
• How often the ice maker and water system may cycle
• Which storage accessories (bins, drawers, shelves) fit correctly

Even when total cubic feet stays the same, broken or missing storage parts can reduce usable capacity. For model 10657024601, common examples include:

• A damaged crisper can limit produce storage (see refrigerator crisper drawer WP2188656)
• A cracked shelf can reduce safe loading and organization
• A missing ice container can reduce freezer organization
• A worn door cam can cause poor door closing, which can lead to frost and lost space

• Keep air vents clear in both compartments so cold air can circulate.
• Avoid overpacking; tight packing causes warm spots and moisture.
• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Replace the water filter on schedule to maintain water flow and ice production (see genuine Kenmore refrigerator water filter EDR3RXD1).

You can order replacement parts for your Kenmore 10657024601 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657024601, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment. Open the refrigerator door and look along the interior side wall near the front edge; the label is typically at about eye level.

• Open the refrigerator (fresh food) door first (not the freezer).
• Check the left and right interior side walls near the front frame.
• Look near the top shelf area and the crisper drawer area.
• If you do not see it, check the ceiling liner inside the refrigerator compartment.
• Wipe the area with a damp cloth; labels can blend in with the liner.

The same label usually lists both the model and serial information.

We use the exact model number to match the correct Kenmore parts for your refrigerator, such as the correct water filter, ice maker assembly, or inlet valve. Even small model-number differences can change which parts fit.

Confirm the model number from the label, then use the parts list for 10657024601 to choose replacements, or search by model on Sears PartsDirect. For model-specific identification and service information, check the 10657024601 owner's manual.

Last updated: February 2026