Maytag MFF2558VEM5 refrigerator Parts

For many households, a bottom-mount refrigerator like the Maytag MFF2558VEM5 is the better layout because the fresh-food section sits at eye and waist level, so you reach milk, produce, and leftovers more comfortably while the freezer stays in a lower pull-out drawer. See the MFF2558VEM5 owner's manual for model-specific use and care details.

When a bottom-mount is the best choice

• You use the refrigerator compartment more often than the freezer.
• You want fewer bends and less lifting for everyday items.
• You like freezer organization in a drawer with baskets or dividers.
• You store lots of fresh food and want it at a convenient height.
• You prefer a cleaner look with the freezer hidden below.

When another style may fit better

• You need the freezer at eye level (upright freezer users often prefer this).
• You frequently access frozen foods all day (a top-freezer can feel faster).
• You want the lowest upfront cost (top-freezers are often simpler designs).

Quick comparison

Layout	Everyday comfort	Freezer access	Typical best for
Bottom-mount	High (fresh food at eye level)	Lower drawer	Fresh-food heavy households
Top-freezer	Medium	Eye level	Budget-focused, frozen-food heavy
Side-by-side	Medium	Eye level	Narrow kitchens, balanced use

Why it matters

Layout affects how often you bend, how you organize food, and how efficiently you use space. With a bottom-mount, the most-used shelves are easier to reach, which helps day-to-day convenience and reduces spills from lifting heavy items.

Last updated: January 2026

On the Maytag MFF2558VEM5 bottom-mount refrigerator, you lower the front rollers (wheels) by removing the base grille and turning the roller adjustment screws to the left with a 3/8-inch hex driver; then lower the brake feet clockwise until they firmly touch the floor. See the steps in the MFF2558VEM5 owner's manual.

Step-by-step: lowering the front rollers

• Unplug the refrigerator or switch off power at the breaker for safety.
• Remove the base grille by grasping it firmly and pulling it toward you.
• If present, remove the bracket cover (use the cover notch as shown in the manual).
• Use a 3/8-inch hex driver to turn the roller adjustment screw:
  • Turn left to lower that side.
  • Turn right to raise that side.
• Turn both sides the same amount to keep the cabinet level side-to-side.
• Lower the brake foot on each side by turning it clockwise until it is firmly against the floor.

Quick reference: which way do I turn?

What you want to do	What to turn	Direction
Lower the front (lower the wheels)	Roller adjustment screw	Left
Raise the front	Roller adjustment screw	Right
Stop the refrigerator from rolling	Brake foot	Clockwise until firm

Why it matters

Proper roller and brake-foot adjustment helps the doors close more easily, reduces cabinet rocking, and keeps the freezer drawer from pulling the refrigerator forward.

Helpful tips

• Have someone push gently against the top of the refrigerator while you adjust; it takes weight off the rollers and makes the screws easier to turn.
• Expect to make several turns before you see a noticeable change.
• After adjusting, open and close the doors to confirm they seal and close smoothly; if needed, tilt the refrigerator slightly more to the rear.

Last updated: January 2026

For Maytag refrigerators like model MFF2558VEM5, the most common problems are cooling complaints (not cold enough, warm freezer, running too much) and ice maker or water dispenser issues. Many of these start with airflow, temperature settings, or water supply problems you can check quickly using the MFF2558VEM5 owner's manual.

Most common issues and what to check first

• Not cooling well: make sure vents inside the refrigerator and freezer are not blocked by food.
• Runs constantly: allow a full 24 hours after installation for temperatures to stabilize; setting controls to “coldest” will not cool faster.
• Ice maker not making ice: confirm the household water supply is on and the water line is not kinked.
• Weak water flow: a restricted filter or low house water pressure can reduce dispenser flow.
• Door not sealing: gaps or a warped gasket let warm air in and cause long run times.
• Noisy operation: a failing evaporator fan can cause warming and unusual sounds.

Quick troubleshooting table

Symptom	Most likely cause	Good next step
Refrigerator warm, freezer OK	Airflow issue or evaporator fan problem	Check vents; listen for fan; inspect fan area
Freezer warm, ice melting	Cooling system or airflow issue	Verify settings; clean airflow paths
Ice maker stopped	Water supply or ice maker fault	Check shutoff valve; inspect ice maker
Runs “all the time”	Door leak, dirty coils, warm room, heavy use	Check gasket seal; reduce door openings

Parts that commonly relate to these symptoms (MFF2558VEM5)

If troubleshooting points to a failed component, these are common repair-related parts for this model:

• Refrigerator evaporator fan motor WPW10128551 (air circulation and cooling)
• Refrigerator water inlet valve assembly WP2315576 (ice maker and dispenser water supply)
• Refrigerator ice maker D7824706Q (ice production)
• Refrigerator electronic control WPW10503278 (temperature control and system operation)

Why it matters

Cooling and ice maker problems often get worse over time. A small airflow restriction or door seal leak can lead to temperature swings, food spoilage, and excessive compressor run time.

Last updated: January 2026

Yes. On the Maytag MFF2558VEM5 bottom-mount refrigerator, you can lower the cabinet slightly by adjusting the front roller adjustment screws or the leveling screws located behind the base grille. To lower the refrigerator, turn the adjustment screw to the left (counterclockwise), then recheck door closing.

How to lower the refrigerator (leveling or roller adjustment)

Use the procedure shown in the MFF2558VEM5 owner's manual; it covers multiple base styles (front adjustable rollers or a leveling screw) and the correct access steps.

• Remove the base grille by grasping it firmly and pulling it toward you.
• If your base style has a bracket cover, remove it using the cover notch.
• Have someone push gently against the top of the refrigerator to take weight off the rollers or screws.
• Turn the roller adjustment screw(s) or leveling screw on each side to lower that side.
• Make the same adjustment on both sides to keep the cabinet level.
• Open and close the doors to confirm they close easily, then reinstall the base grille.

Which way do I turn to lower it?

Adjustment style on the base	Where you adjust	To lower the refrigerator
Front adjustable rollers (roller adjustment screw)	Base area behind the grille	Turn the screw to the left
Leveling screw style	Base area behind the grille	Turn the screw counterclockwise

After you lower it: quick checks

• Confirm the refrigerator is stable and does not rock.
• Confirm both doors seal evenly against the gasket.
• If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both adjustments to the right (same amount on both sides).

Why it matters

Correct leveling helps the doors self-close and seal properly, which improves temperature stability and reduces moisture problems caused by a door that is slightly ajar.

Last updated: January 2026