Kenmore Elite 10657706700 side-by-side refrigerator Parts

You can’t determine the exact cubic-foot capacity of Kenmore Elite model 10657706700 from the model number alone; the reliable way is to check the capacity listed in the owner's manual. If you’re estimating, measure the inside usable space and calculate cubic feet.

Use interior measurements (not the outside cabinet size). Measure in inches:

• Width: inside wall to inside wall
• Height: floor of compartment to underside of top liner
• Depth: inside back wall to inside front edge (ignore door bins)
• Subtract space taken by fixed components (ice maker housing, air tower, shelves) for a more realistic “usable” estimate
• Convert to cubic feet by dividing by 1,728 (12 × 12 × 12)

Formula:

• Cubic feet = (W × H × D) ÷ 1,728

If an interior section measures 20" W × 60" H × 18" D:

• Volume (cu in) = 20 × 60 × 18 = 21,600
• Volume (cu ft) = 21,600 ÷ 1,728 = 12.5 cu ft

For a side-by-side, estimate fresh food and freezer separately, then add them.

Capacity affects shelf/bin fit, food storage planning, and choosing compatible accessories like a refrigerator water filter. For this model, the manual also lists water filter details (for example, the replacement filter part number 9030), which is useful when matching parts.

Last updated: February 2026

Kenmore is a brand name, and model 10657706700 is in the 106 model series that is manufactured for Kenmore by Whirlpool. You can confirm the exact model identification details and feature set in the 10657706700 owner's manual.

Kenmore model numbers often indicate the original manufacturer by the first three digits.

• 106 prefix: Whirlpool-built Kenmore refrigerators
• The remaining digits identify the specific configuration (side-by-side layout, options, and trim)
• The full model number on the rating label is what matters for parts compatibility

Knowing who built the refrigerator helps you match the correct replacement parts and troubleshooting steps for your exact design.

• Parts listings and diagrams align to the Whirlpool-built platform for the 106 series
• Common service items (like the water filter and ice maker) are model-specific even within the same series
• Using the exact model number reduces ordering the wrong door bin, valve, or ice maker assembly

If you are matching parts from the label inside the fresh food compartment, compare it to the model number shown in the 10657706700 owner's manual before ordering.

Last updated: February 2026

Most Kenmore refrigerators average 12 to 15 years of service life. For your Kenmore Elite side-by-side refrigerator 10657706700, consistent maintenance (cleaning, good airflow, and timely filter changes) helps you reach the high end of that range.

A refrigerator’s lifespan depends most on compressor run time, door seal condition, and how well the condenser can shed heat.

• Average range: 12 to 15 years
• Common “life extenders”: clean condenser area, stable temperatures, good door sealing
• Common “life shorteners”: clogged condenser coils, poor ventilation, frequent warm-air infiltration from leaky gaskets

Use the care and maintenance guidance in your owner's manual and focus on these high-impact items:

• Keep airflow clear around the cabinet and grille area
• Clean dust from the condenser area regularly
• Confirm doors close and seal fully every time
• Keep freezer and fresh food sections at steady, recommended temperatures
• Replace the water filter on schedule to protect water flow and ice maker performance

These parts do not “set” the lifespan, but they commonly drive service calls when they wear or fail.

A Kenmore side-by-side that is kept clean, well-ventilated, and properly sealed typically runs more efficiently. That reduces compressor strain and helps the sealed refrigeration system deliver reliable cooling for years.

Last updated: February 2026

Common issues on the Kenmore Elite 10657706700 side-by-side refrigerator include not cooling or weak cooling, ice maker and water dispenser problems, water leaks, and unusual noises. Many symptoms trace back to airflow restrictions (dirty condenser coils), defrost system faults, or water supply and valve issues.

• Refrigerator not running at all: power cord unplugged, outlet issue, tripped breaker, or controls turned off (see the troubleshooting section in the owner's manual).
• Runs a lot or seems to never shut off: warm room, frequent door openings, doors left ajar, or heavy food load; this model can run longer due to an efficient compressor and fans.
• Noisy operation: buzzing (water valve filling ice maker), pulsating (fans/compressor adjusting), sizzling/gurgling (defrost water on heater), popping (normal expansion), or water running during defrost.
• Ice maker not making ice: water supply not connected/turned on, frozen fill tube, or a failed ice maker assembly such as the refrigerator ice maker 2198597.
• Water leaks or no water at dispenser: clogged filter, kinked water line, or a failing inlet valve such as the refrigerator water inlet valve WPW10159839.

1. Confirm the unit has power and the outlet works (plug in a lamp to test).
2. Make sure temperature controls are turned on and set correctly.
3. After installation or a power interruption, allow 24 hours for temperatures to stabilize.
4. Clean condenser coils and make sure airflow around the cabinet is not blocked.
5. Verify doors close fully and gaskets seal all the way around.

Cooling, ice, and water problems often get worse over time. Catching a dirty coil, a weak water supply, or an early defrost failure helps prevent food spoilage, recurring leaks, and heavy compressor run time.

Last updated: February 2026