Kenmore 10658943803 refrigerator Parts

For Kenmore model 10658943803, the total capacity is 25.4 cubic feet. This breaks down to 21.4 cu. ft. for the refrigerator section and 4.0 cu. ft. for the freezer section; you can confirm these specs in the 10658943803 owner's manual.

Capacity breakdown for model 10658943803

• Total capacity: 25.4 cu. ft.
• Refrigerator (fresh food) capacity: 21.4 cu. ft.
• Freezer capacity: 4.0 cu. ft.
• Best place to verify: the specifications section of the 10658943803 owner's manual

How to verify capacity on the appliance

• Check the model and serial tag inside the fresh food compartment.
• Look for a ratings/spec label that may list total capacity.
• Compare the label model number to 10658943803 to ensure you are matching the correct unit.

If you ever need to calculate cubic feet (DIY method)

Use this when shelves, bins, or ice storage changes reduce usable space.

Step	What to measure (inches)	What to do
1	Height x width x depth	Multiply to get cubic inches
2	Refrigerator + freezer	Add both cubic-inch totals
3	Total cubic inches	Divide by 1,728 to get cubic feet

Why it matters

Capacity helps when comparing side-by-side refrigerator sizes and when choosing compatible storage and water system parts such as the refrigerator water filter EDR3RXD1.

Last updated: February 2026

For Kenmore side-by-side refrigerator model 10658943803, replacing the water filter is a quick, no-tools job: open the filter cover, release the old filter, install the new one fully seated, then flush water to clear air and carbon fines. Use the steps in the 10658943803 owner's manual.

Step-by-step: replace the filter

• Dispense a few cups of water first to relieve pressure.
• Locate the filter housing (commonly in the fresh food compartment or base grille area).
• Open the filter cover or door.
• Remove the old filter:
  • If it is a push-button style, press the eject button and pull the filter out.
  • If it is a quarter-turn style, rotate the filter (usually counterclockwise) and pull out.
• Install the new filter:
  • Insert the filter straight in; push until it stops, or rotate until it locks.
• Close the cover and check for leaks while dispensing water.

Recommended replacement part for this model: Genuine Kenmore refrigerator water filter EDR3RXD1

After you install the new filter (important)

• Flush 3 to 4 gallons of water through the dispenser (or about 5 minutes total dispensing time).
• Discard the first full bin of ice after the change.
• Reset the filter indicator light (if your dispenser has one).

Task	What to do	What you should see
Flush water	Run several gallons	Steady flow, no sputtering
Check sealing	Inspect housing and connections	No drips at the filter head
Ice maker recovery	Wait for new ice	Normal ice production within 24 hours

Why it matters

A fresh refrigerator water filter improves taste and flow, and it helps prevent dispenser and ice maker issues caused by restricted water supply.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 33 inches to 36 inches wide. For the exact cabinet width of Kenmore model 10658943803, we recommend confirming the dimensions in the 10658943803 owner's manual, since width can vary by series (standard-depth vs. counter-depth) and by door and hinge design.

Typical widths you can expect

Side-by-side refrigerator widths are fairly standardized, but the final “fits in my opening” width depends on what you measure.

• Cabinet-only width: typically 33 to 36 inches
• Overall width with doors: often slightly wider than the cabinet
• Overall width with handles: can add about 1 to 3 inches
• Clearance space: plan extra room for door swing and airflow

How to measure width the right way

Use a tape measure and capture three numbers so you do not get surprised during installation.

• Measure the opening width at the top, middle, and bottom
• Measure the refrigerator cabinet width (body only)
• Measure door-to-door width at the widest point
• Include handles if they stick out past the doors
• Allow clearance for hinges, door swing, and ventilation

Quick reference: what “width” might mean

Measurement you need	What it includes	Why it changes
Cabinet width	Refrigerator body only	Model design differences
Door width	Doors closed, no handles	Door thickness and trim
Overall width	Doors plus handles	Handle style and projection

Why it matters

Getting the correct width helps prevent delivery day problems, protects the door gaskets from rubbing, and ensures proper airflow so the compressor and condenser can cool efficiently.

Last updated: February 2026

Many Kenmore refrigerators are built by Whirlpool, and the quickest way to tell is the model number prefix. For Kenmore model 10658943803, the 106 prefix indicates it is a Whirlpool-manufactured Kenmore refrigerator; use the 10658943803 owner's manual to confirm model identification details and features.

How to identify a Whirlpool-made Kenmore refrigerator

Look at the first three digits of the Kenmore model number (the prefix). These prefixes commonly indicate Whirlpool as the manufacturer:

• 106 (very common for Kenmore refrigerators)
• 110 (often laundry, but can indicate Whirlpool-built Kenmore products)
• 665
• 198
• 552

Quick examples (what the prefix means)

Kenmore model prefix	What it typically indicates	What to do next
106	Whirlpool-built Kenmore refrigerator	Match parts by full model number
665	Whirlpool-built Kenmore (varies by product type)	Verify by model tag and parts list
Other prefixes	Another manufacturer	Use the exact model number for parts

Why it matters for parts and repairs

Manufacturer identification helps you choose compatible parts and follow the right troubleshooting steps. Even when two Kenmore refrigerators look similar, parts like the water filter, ice maker, or control board can differ by model series.

Tips when ordering parts for a 106-prefix Kenmore refrigerator

• Use the full model number from the rating label, not just the 106 prefix.
• Match by part ID when possible (example: refrigerator water inlet valve W10408179).
• For water and ice issues, start with basic maintenance like filter changes and line checks.
• If you are replacing the filter, follow the steps in how to replace the water filter in a Kenmore refrigerator.
• If you are troubleshooting a display or fault, use Kenmore 106 model refrigerator error codes as a starting point.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for a Kenmore refrigerator like model 10658943803 are typically manufactured by major OEM suppliers that build Kenmore appliances and components (commonly Whirlpool-family suppliers, and sometimes other large appliance manufacturers). The most reliable way to confirm the correct maker is to match the exact part ID and model fit.

How to identify the actual manufacturer for your part

We recommend using the model number and the part’s ID to ensure you get the correct OEM-equivalent component.

• Look up the part by model 10658943803 first, then select the exact part ID
• Match the part ID and part number on the old part label when possible
• Use the part’s description (valve, thermostat, ice maker) to avoid look-alike substitutions
• For water system parts, confirm the filter style and cap style before ordering
• For electrical parts, match connectors and mounting points exactly

For diagrams, part locations, and model-specific notes, use the 10658943803 owner's manual.

Examples of OEM-style parts you can match by ID (this model)

These examples show how Kenmore parts are commonly identified and sourced by exact ID, not just by brand name.

System	Example part name	Part ID
Water filtration	Genuine Kenmore refrigerator water filter	EDR3RXD1
Water supply	Refrigerator water inlet valve	W10408179
Ice production	Refrigerator ice maker	WPW10190965
Temperature control	Refrigerator thermostat	WP2198202

If you are replacing the filter, follow the steps in how to replace the water filter in a Kenmore refrigerator and match the correct filter ID for your housing.

Why it matters

Kenmore-branded appliances often share designs across multiple manufacturers. Ordering by model number (10658943803) and part ID prevents fit issues, leaks, and electrical mismatches, especially for items like an inlet valve, ice maker, or thermostat.

Last updated: February 2026