Kenmore 79094032701 electric range Parts

The Kenmore electric range model 79094032701 is a standard freestanding 30-inch class range; the exact exterior dimensions and oven capacity vary by configuration, so we recommend confirming the precise measurements in the 79094032701 owner's manual.

What “size” usually means for this model

Most customers mean one of these:

• Exterior width (fits a 30-inch opening in most kitchens)
• Overall height (often adjustable with leveling legs)
• Overall depth (varies depending on handle and rear clearance)
• Oven capacity (measured in cubic feet)

Typical size ranges for a 30-inch freestanding electric range

These ranges are what we see most often for Kenmore 790-series freestanding electric ranges:

• Width: about 29 7/8 in. to 30 in.
• Height: about 46 in. to 48 in. (adjustable)
• Depth: about 25 in. to 28 in. (handle and backguard can change this)

Measurement	Typical range	What can change it
Width	29 7/8 in. to 30 in.	Side trim, cabinet opening
Height	46 in. to 48 in.	Leveling legs, floor height
Depth	25 in. to 28 in.	Door handle, rear clearance

How to get the exact dimensions (fast and accurate)

Use these checks so you get the right fit for your kitchen cutout and anti-tip bracket placement:

• Look up the dimension diagram/specs in the 79094032701 owner's manual.
• Measure width at the widest point (often the cooktop edge, not the body).
• Measure depth including the handle (this is the number that surprises most people).
• Measure height from floor to cooktop after leveling the range.
• If you are replacing an element or sensor, match parts by model to avoid fit issues (for example, the frigidaire range bake element 316075103).

Why it matters

Getting the correct “size” prevents installation problems like a range that will not slide fully into the opening, a door that hits adjacent cabinets, or incorrect anti-tip bracket alignment.

Last updated: January 2026

To reset the Kenmore electric range model 79094032701, turn the range OFF and cycle power at the breaker (or unplug it) for about 1 minute, then restore power and reset the clock and any oven settings. This clears many control glitches after a power interruption; see the 79094032701 owner's manual.

Quick reset steps (control reboot)

• Turn all surface element knobs to OFF.
• Turn the range OFF at the household breaker (preferred) or unplug the power cord.
• Wait 60 seconds.
• Restore power.
• Set the clock and re-enter any cooking functions.

If the control is locked (looks like it will not respond)

This model has an oven lockout feature that can make the keypad seem “frozen.”

• Press and hold the oven lockout pad for 3 seconds.
• Watch for “LOC” on the display and the Door Locked light.
• To cancel lockout, press and hold the same pad for 3 seconds again.

What you should see after a successful reset

Situation	What happens	What to do next
Power was interrupted	Oven may resume operation if it was left on	Turn functions off, then reset clock and settings
Control glitch	Display returns to normal time-of-day	Test Bake and Broil briefly
Lockout was on	“LOC” appears until unlocked	Cancel lockout, then retry settings

Why it matters

A power-cycle reset restores normal operation after a power failure or minor electronic glitch, and resetting the clock is required so timed bake and delay start features work correctly.

Last updated: January 2026

For your Kenmore electric range, the most reliable way to identify the exact model is to read the model number from the identification plate (model and serial tag). On model 79094032701, the identification plate is located on the right side of the oven front frame inside the storage or warmer drawer compartment; confirm the exact spot in the 79094032701 owner's manual.

Where to look first (fast checklist)

• Pull out the storage or warmer drawer fully.
• Look on the right side of the oven front frame for a sticker or metal plate.
• Find the lines labeled Model No. and Serial No.
• Copy the full model number exactly as printed (all digits).
• If the tag is greasy or faded, wipe it gently so every digit is readable.

What to do with the model number

Once you have the full model number, you can match the correct diagrams and replacement parts for your exact Kenmore range.

Common part lookups tied to the model number include:

• Oven heating parts (for example, range bake element 316075103 and broil element)
• Temperature sensing parts (for example, range oven temperature sensor 316490000)
• Cooktop controls (surface element control switches)
• Electrical connection parts (terminal block, wire harness)

Model number vs. serial number

Item	What it identifies	Best used for
Model number	The exact design and parts fit	Ordering parts, diagrams, troubleshooting
Serial number	The unit’s production identifier	Service records and technician diagnostics

Why it matters

Kenmore ranges can look similar across multiple series (many start with 790). Using the identification plate prevents ordering the wrong bake element, oven temperature sensor, or control switch.

Last updated: January 2026