Kenmore 66513899K801 undercounter dishwasher Parts

Yes. We still supply replacement parts for many Kenmore dishwashers, including model 66513899K801. The key is matching parts to your exact model number so you get the correct fit and electrical ratings for items like the drain pump, heating element, door seal, and control components.

Use the model number 66513899K801 and confirm the part name and ID before ordering. Your 66513899K801 owner's manual also helps you identify features and maintenance items that commonly need replacement.

• Match the full model number exactly (including all digits and suffixes).
• Compare the part description to your symptom (leak, no drain, no heat, won’t start).
• Check whether you need a complete assembly or a single component.
• Replace clamps or seals when you replace hoses or pumps to prevent leaks.
• After any repair, run a short cycle and confirm water enters and drains normally.

Here are examples of in-stock parts for this model that cover frequent repairs:

Kenmore dishwashers are built with model-specific variations in wiring, mounting, and plumbing connections. Using the exact 66513899K801 match helps prevent repeat leaks, poor wash performance, and electrical issues after installation.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513899K801 is worth it when the fix is a common wear item or a single failed part; it is usually not worth it when multiple major components (pump motor, electronic control, or tub) are failing at the same time.

Use this simple rule: if the repair is under about 50% of the cost of a comparable new dishwasher, repair is the better value; if it is over 50%, replacement is usually the smarter move.

Repairs that are typically worth it

• Drain problems caused by a kinked or clogged drain line
• A single failed drain pump or inlet valve
• Leaks from a worn door seal or vent gasket
• Heating and drying issues tied to one failed heater
• A blown fuse after a power event (once the root cause is corrected)

We recommend following the troubleshooting steps in the 66513899K801 owner’s manual. For example, if water remains in the tub, the manual points you to basics like confirming the cycle completed, checking the disposer knockout plug, and inspecting the drain hose for kinks.

• Confirm the cycle fully completed and you restarted correctly (START/RESUME)
• Check the drain hose routing for kinks or a high loop issue
• If connected to a disposer, confirm the inlet knockout plug is removed
• Check the house breaker or fuse
• If you have hard water, use rinse aid and monthly dishwasher cleaner to prevent buildup

These examples help you judge whether you are looking at a “small repair” or a “major repair.”

A dishwasher can be “economical to repair” when the failure is isolated, but once you stack multiple high-cost parts (pump motor, electronic control, tub), you can spend near replacement cost without improving overall reliability.

Last updated: February 2026

On Kenmore undercounter dishwashers like model 66513899K801, the model number is printed on the model and serial number label attached to the dishwasher. Check the label and record the full model number and serial number for parts lookup and service.

Most Kenmore dishwashers place the model and serial number label in one of these common spots:

• Along the inner edge of the door (left or right side)
• On the top edge of the door (visible when the door is open)
• On the frame around the tub opening
• Occasionally on the side of the tub just inside the door

If you do not see it right away, open the door fully and scan the perimeter of the tub opening with a flashlight.

We recommend recording the information exactly as shown on the label:

• Complete model number (for example, 66513899K801)
• Serial number
• Purchase date (if available)

The full model number ensures you get the correct Kenmore dishwasher parts that match your exact version (including color or production changes). That prevents ordering the wrong control panel, pump, or door seal.

Use this checklist to confirm you have the right identifier:

• Model number includes all digits and letters (no missing suffix)
• Serial number is captured exactly (helps with version-specific parts)
• Label is from the dishwasher itself (not the manual cover)

For label location details and how Kenmore documents model identification, use the owner's manual.

Last updated: March 2026