Kenmore 1068222040 upright freezer Parts

Most 17 cubic foot upright freezers weigh about 170 to 220 lb when empty. For a Kenmore upright freezer like model 1068222040, the exact weight depends on the cabinet insulation, shelving, and compressor package, but it typically falls in that range.

Empty weight varies by features such as frost-free design, interior liner thickness, and door construction.

• Manual-defrost models: often 170 to 200 lb
• Frost-free models: often 190 to 220 lb
• Add-ons that increase weight: thicker door insulation, more wire shelves/bins, heavier hinges

We recommend planning for safe moving even if you do not know the exact spec.

• Use a 2-wheel appliance dolly with a strap
• Plan for 2 people minimum on stairs
• Keep the freezer upright to protect the sealed system
• If it was tipped, let it stand upright at least 4 hours before plugging in
• Protect floors with plywood or sliders; loaded dollies can exceed 250 lb with packaging

Weight affects delivery access, stair safety, and whether your flooring can handle point loads from a dolly. It also helps when choosing tie-down straps and deciding if you need a lift-gate truck.

If the door is hard to close or you notice air leaks, the freezer can feel “heavier” to use even though the cabinet weight is unchanged. A common fix is replacing the door seal.

• Consider inspecting the door gasket 2188438A for gaps, tears, or looseness

Last updated: January 2026

Your Kenmore upright freezer model 1068222040 has a specific cubic-foot capacity set by its cabinet size, but capacity is not listed in the information we have here. Most upright freezers fall into common size ranges (compact through large), so you can estimate capacity by measuring the exterior and matching it to typical dimensions.

Use your freezer’s width x height x depth (in inches), then convert to cubic feet.

• Measure the cabinet (not the handle): width, height, depth
• Multiply: W x H x D = cubic inches
• Divide by 1,728 to get cubic feet
• Subtract a little for insulation and interior components (shelves, liner) to estimate usable space
• Compare your result to the size ranges below

Knowing cubic feet helps us choose the right storage plan, confirm fit in a space, and compare energy use expectations across similar Kenmore upright freezer sizes.

A poor seal can change how the freezer performs and how “usable” the space feels. If you see gaps, frost buildup, or the door pops open, check the door gasket 2188438A.

Last updated: January 2026

On a Kenmore upright freezer like model 1068222040, the model number is printed on a rating label inside the cabinet or on the exterior cabinet. Common spots include the inside side wall, the ceiling area, behind the lower kick plate, or on the back of the unit.

• Inside the freezer compartment on a side wall (often near the front opening)
• Inside the cabinet near the top (ceiling area)
• Behind the lower front kick plate or toe grille
• On the back exterior panel
• Along the door frame area (open the door and check the perimeter)

The label usually includes:

• Model number (for example, 1068222040)
• Serial number
• Electrical ratings (volts/amps)
• Refrigerant type

• Use a flashlight and look for a silver or white sticker
• Check flat surfaces that do not frost over heavily (door frame and upper side walls)
• If the label is damaged or missing, check your purchase paperwork or service receipt

The exact model number ensures we match the correct Kenmore upright freezer parts (like a door gasket or thermostat) so the fit, wiring, and temperature control are right for your freezer.

For help confirming you have the right model number before ordering, use how to find your appliance model number (and what it means for parts).

Last updated: January 2026