Kenmore Elite 79578543800 refrigerator Parts

Most Kenmore Elite refrigerators typically last 10 to 15 years with normal household use. For the Kenmore Elite 79578543800 bottom-mount refrigerator, consistent maintenance (especially cleaning condenser coils and keeping door gaskets sealing well) is what most often determines whether it reaches the high end of that range. See the 79578543800 use and care guide for model-specific care and cleaning routines.

A refrigerator’s “lifespan” usually means the point where a major repair (often in the sealed system or cooling airflow) costs enough that replacement becomes the practical choice.

• Typical service life: 10 to 15 years
• Common long-life drivers: clean airflow, stable temperatures, good door sealing
• Common end-of-life drivers: compressor or sealed-system issues, chronic cooling problems, repeated leaks
• High-impact maintenance: condenser coil cleaning, gasket care, avoiding overloading and frequent door openings

The manual for this model family calls out routine care areas like condenser coils and door gaskets; those directly affect run time and wear.

• Clean condenser coils regularly to reduce compressor run time
• Wipe and inspect door liner and gaskets so doors seal tightly
• Keep vents clear inside the fresh food and freezer sections
• Maintain steady settings (avoid frequent temperature changes)
• Address water leaks quickly to prevent corrosion and ice buildup

• Worth repairing: airflow issues, door sealing problems, minor water line leaks
• Often expensive: sealed-system repairs (refrigerant, compressor, internal tubing)

If you are troubleshooting cooling performance, the refrigerator condenser coil ACG73964501 is one of the components that directly affects heat removal and overall efficiency.

A refrigerator that runs longer to maintain temperature uses more energy and puts more stress on the compressor and fans. Basic upkeep (coils, gaskets, airflow) is the most reliable way to reach the full expected lifespan.

Last updated: January 2026

Common problems on the Kenmore Elite 79578543800 bottom-mount refrigerator are not cooling well, frost or ice buildup, water leaks/puddles, and odd noises. Most fixes start with cleaning condenser coils, confirming doors seal tightly, and checking the defrost and fan systems using the 79578543800 owner's manual.

• Refrigerator or freezer not cold enough: dirty condenser coils, evaporator fan issue, or airflow blocked by overpacked shelves
• Frost/ice crystals on food: door not closing fully, door opened often, or a defrost system problem
• Water under the refrigerator or in the freezer: clogged/iced drain path, drain tube issue, or water line connection leak
• Ice tastes bad or smells: old ice, unwrapped food odors, or mineral-heavy water supply
• Lights not working or door alarm issues: door switch or light socket problem

1. Confirm temperatures: set fresh food around 37°F and freezer around 0°F.
2. Clean the condenser coils: dust buildup reduces cooling and can increase run time.
3. Check door sealing and alignment: clean gaskets and the surfaces they touch; a poor seal drives frost and warm temps.
4. Listen for fan noise changes: a failing evaporator fan can cause warm temps and uneven cooling.
5. Look for leak clues: puddles often point to a defrost drain issue; check the drain area and tubing.

Cooling, frost control, and water delivery problems often overlap. For example, a door that does not seal can cause frost, which restricts airflow and makes the refrigerator seem like it is not cooling. Starting with cleaning, sealing, and airflow checks prevents unnecessary part replacement.

Last updated: January 2026

The Kenmore Elite 79578543800 is a bottom-freezer refrigerator in the 795.7854 model family. For exact exterior dimensions (width, depth, height) and capacity for your specific color/trim version, we use the specifications listed in the 79578543800 owner’s manual.

Refrigerator “size” can refer to more than one measurement. We recommend confirming these in the manual before ordering parts, planning delivery, or measuring a cutout.

• Overall capacity (cu. ft.): total storage volume
• Exterior dimensions: width, depth (with and without handles), height
• Clearance needs: space for door swing, airflow, and leveling
• Door and drawer opening space: needed to fully extend freezer drawer
• Water line routing space: room behind the unit for tubing and service access

Most Kenmore Elite bottom-freezer refrigerators in this class are approximately:

Getting the correct size prevents installation problems (tight door swing, blocked vents, pinched water line) and helps ensure replacement parts fit correctly, especially door bins, gaskets, and drawers.

• Measure width at the widest point (often the doors, not the cabinet).
• Measure depth two ways: cabinet only and to the front of the handles.
• Measure height to the top hinge cover (not just the cabinet).
• Leave extra space behind for the water line; the manual’s water line guidance calls for extra tubing so the refrigerator can be pulled out for service.
• If you are removing doors/handles to fit through a doorway, follow the steps in the 79578543800 owner’s manual.

Last updated: January 2026