Kenmore 11079822800 dryer Parts

To find the exact model of your Kenmore dryer, locate the model and serial number tag on the dryer cabinet and copy the full model number exactly as shown (for this page, it’s 11079822800). Using the tag is more accurate than relying on paperwork or memory. See the 11079822800 owner's manual for model and serial tag details and safe handling.

Where to look for the model and serial number tag

Most Kenmore dryers place the tag in one of these common spots:

• On the door opening (cabinet frame) when you open the dryer door
• On the inside of the dryer door itself
• On the back panel of the dryer cabinet
• Near the lower front area behind the toe panel (on some designs)
• On the side panel near the door opening

How to record the model number correctly

Write it down exactly as it appears on the tag so parts and diagrams match.

• Copy every digit and letter (no spaces)
• Use the full model number, not just “110” or “Kenmore 110 series”
• Record the serial number too; it helps confirm production details
• Take a clear photo of the tag for reference
• If the tag is worn, use a flashlight and read it at an angle

Quick check: model number vs. serial number

Item	What it’s used for	Example format
Model number	Identifies the exact dryer design for parts	11079822800
Serial number	Identifies the specific unit built	Mix of letters and numbers

Why it matters

Kenmore dryers can look identical across multiple model numbers, but internal parts (like a door switch, timer, or drum support roller) can differ. The model tag ensures you order the correct replacement part the first time.

Last updated: February 2026

On Kenmore dryer model 11079822800, the model and serial information (often called the model/serial number plate) is typically found on the dryer cabinet opening around the door area. That label is the quickest place to confirm the exact model number you need before ordering parts.

What to look for on the label

The label usually includes more than one identifier. Use these items when matching parts:

• Model number (for this dryer: 11079822800)
• Serial number (helps identify production run)
• Type of fuel (gas or electric) and basic ratings
• Sometimes a manufacturing code or additional ID line

For diagrams and the exact label location callouts, use the 11079822800 owner's manual.

Common label locations on Kenmore dryers

If you do not see it immediately at the door opening, check these common spots:

• Inside the door opening on the front panel
• On the door frame itself
• Along the front cabinet lip near the lint screen housing
• On the rear panel (less common, but possible)

Why the model number matters when buying parts

Kenmore dryers can look similar across multiple series, but internal parts (like a door switch, idler pulley, or drum support roller) can vary by model. Matching the model number first helps ensure the correct fit and wiring style.

What you have	What it’s used for	Example for this dryer
Model number	Selects the correct parts breakdown	11079822800
Part ID	Identifies the exact replacement part listing	WP3406107
Part number	Manufacturer number printed on packaging/part	3406107

If you’re already replacing a common “door area” part

If the dryer will not start when the door is closed, the door switch is a frequent culprit. For this model, the matching part listing is the dryer door switch WP3406107.

Why it matters

Using the label information prevents ordering the wrong Kenmore dryer parts and saves time on returns, especially for electrical parts like switches, sensors, and timers.

Last updated: February 2026

The average lifespan of a Kenmore dryer like model 11079822800 is about 13 years. Keeping airflow strong (clean lint screen, clear venting) and replacing normal-wear parts promptly helps you reach that lifespan with fewer breakdowns.

What affects lifespan the most

• Vent restriction (crushed, kinked, or long duct runs) that overheats the dryer
• Lint buildup in the lint screen housing and exhaust ducting
• Overloading the drum, which strains the belt, idler, and motor
• Heat system stress from poor airflow (gas burner components cycle harder)
• Normal wear items such as belts, rollers, pulleys, and light bulbs

Maintenance that adds years (and saves energy)

Use these habits for Kenmore 11079822800:

• Clean the lint screen every load; replace a damaged screen if it will not seat correctly (see screen W10120998).
• Confirm the vent is secured and not kinked; the installation instructions call out avoiding crushed or kinked venting (see installation guide).
• Vacuum lint from the lint screen duct and around the blower area periodically.
• Keep loads medium-sized so the drum turns freely and clothes tumble.
• If you hear squealing or thumping, service the drum support system early; a kit like dryer repair kit 4392067 is commonly used for wear items.

Typical lifespan expectations

Dryer condition	What you can expect	What to do
Well-maintained, good venting	Around 13 years	Keep vent clear; address noises early
Poor venting or heavy use	Shorter lifespan	Correct airflow; reduce overloads
Frequent overheating symptoms	Early part failures	Inspect venting; check thermostats and blower

Why it matters

Most “dryer is wearing out” symptoms are actually airflow or wear-part issues. Good venting reduces heat stress on components like the high-limit thermostat, blower wheel, and gas burner system, which helps the dryer run safely and consistently.

Last updated: March 2026