Can you still get parts for Kenmore refrigerators?
Yes. We still support Kenmore refrigerator repairs by offering replacement parts for many models, including Kenmore 10644329400 side-by-side refrigerators. The best way to ensure fit is to match your complete model number and then choose the exact part (water filter, ice maker, switches, bins) listed for that model.
Use your refrigerator’s complete model number (for this page: 10644329400) and confirm it on the model and serial label inside the fresh food compartment. Your 10644329400 owner's manual also explains where to find that label and what information to record.
- Match the full model number first, then shop parts by symptom (no ice, leaking, warm temps)
- Compare the part ID and description, not just a photo
- Replace wear items on schedule (especially water filters)
- Keep your serial number handy for service and compatibility checks
- If you are unsure between similar items, use the parts list for your exact model
Here are examples of parts available for this model that cover frequent issues like poor water flow, no ice, or dispenser problems:
| Problem you notice | Part that often fixes it | Example part ID for 10644329400 |
|---|---|---|
| Bad taste, slow water flow | Refrigerator water filter | EDR3RXD1 |
| No ice or irregular ice harvest | Ice maker assembly | 2198597 |
| Water won’t fill ice maker | Refrigerator inlet valve | W10247725 |
| Dispenser won’t actuate properly | Dispenser lever retainer | WP2194719 |
If you are replacing the filter, use the exact filter listed for this model, such as the genuine Kenmore refrigerator water filter EDR3RXD1.
Kenmore refrigerators are built across multiple manufacturing platforms, so “Kenmore side-by-side” is not specific enough to guarantee fit. Matching 10644329400 to the correct part ID helps prevent leaks, noise, poor cooling, and repeat repairs.
Last updated: February 2026
How to read Kenmore refrigerator model number?
For Kenmore refrigerator model 10644329400, the model number is read exactly as printed on the model and serial label; the key is finding the full label so you capture every digit. On this model, that label is located on the inside wall of the refrigerator compartment (not on the back of the unit).
Check these common locations first (use a flashlight and look along the cabinet walls):
- Inside the fresh food (refrigerator) compartment on an interior side wall
- Near the crisper drawer area (on the cabinet wall, not on the drawer)
- On the ceiling of the fresh food compartment (less common, but possible)
- On the inside wall of the refrigerator compartment as described in the 10644329400 owner's manual
Once you find the label, copy the model number exactly as shown.
- Write down the full model number and serial number (take a photo as a backup)
- Include all digits; do not drop trailing zeros
- Avoid mixing up similar characters (for example, 0 vs O)
- Keep the information with your purchase date for service and parts lookup
| What to record | Example for this refrigerator | Why it matters |
|---|---|---|
| Model number | 10644329400 | Ensures correct parts diagrams and compatible replacement parts |
| Serial number | (from label) | Helps identify production details for service |
| Purchase/installation date | (your date) | Useful for service history and maintenance tracking |
Kenmore model numbers narrow your refrigerator down to the exact configuration (doors, dispenser setup, ice maker style, and filter system). That accuracy prevents ordering the wrong part, especially for items like a water filter, ice maker assembly, or door hardware.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common issues we see on Kenmore refrigerators like model 10644329400 are cooling problems, water leaks, ice maker and dispenser failures, and normal or abnormal noises. Many of these come down to airflow (fans and coils), defrost performance, and water supply components; use the 10644329400 owner's manual to match symptoms to checks.
- Not cooling or warm temperatures: dirty condenser coils, evaporator fan problems, defrost system trouble (ice buildup), or control issues.
- Runs too much: frequent door openings, warm room, large food load, or airflow restrictions; this model can run longer due to efficient compressor and fans.
- Water leaking or puddles: clogged defrost drain, loose water line, cracked tubing, or a valve that does not close fully.
- Ice maker not making ice: low water pressure, frozen fill tube, failed ice maker module, or inlet valve problems.
- Noisy operation: some sounds are normal (buzzing when the valve fills the ice maker, sizzling during defrost, popping during cool-down).
- Confirm controls are near mid-settings; setting to coldest does not cool faster.
- Make sure doors fully close and vents are not blocked by food packages.
- Listen for the evaporator fan in the freezer; no airflow usually means a fan or frost issue.
- If you have a water/ice issue, verify the shutoff valve is fully open and the supply line is not kinked.
- If noises started after loading groceries, remove items touching the cabinet or sitting on top.
| Problem area | What fails most often | Example part for 10644329400 |
|---|---|---|
| Water taste/flow | Clogged filter | Refrigerator water filter EDR3RXD1 |
| No ice or slow fill | Water valve not opening/closing | Refrigerator inlet valve W10247725 |
| Ice maker dead | Ice maker assembly failure | Refrigerator ice maker assembly 2198597 |
| Frost buildup, warm freezer | Defrost thermostat/bi-metal issue | Refrigerator defrost bi-metal WPW10225581 |
Cooling, leaking, and ice maker problems often share the same root causes: restricted airflow or inconsistent water supply. Catching those early helps protect food temperatures, reduces compressor run time, and prevents floor damage.
Last updated: February 2026
What causes a side-by-side refrigerator to stop cooling?
A Kenmore 10644329400 side-by-side refrigerator usually stops cooling because power is interrupted, the cooling controls are turned OFF or set incorrectly, airflow is blocked, or a cooling-system component (fans, defrost system, compressor) is not running. Start with power and control checks from the 10644329400 owner's manual.
- Confirm the outlet has power and the cord is fully plugged in.
- Check the house fuse or circuit breaker.
- Make sure the cooling is turned ON (the unit will not cool when set to Off).
- Verify both refrigerator and freezer controls are at normal mid-settings.
- Wait a full 24 hours after changes or first install before judging cooling.
- Make sure vents inside both compartments are not blocked by food packages.
Your installation requirements matter. This model needs a dedicated 115V, 60 Hz, 15 or 20 amp grounded circuit, and we do not recommend using an extension cord. If the refrigerator is on a GFCI outlet, nuisance tripping can shut off power and cause loss of cooling; move to a non-GFCI outlet only if your local codes allow it and the circuit is properly grounded (see the 10644329400 installation guide).
| Symptom | What it often points to | What to check next |
|---|---|---|
| Freezer cold, fresh food warm | Airflow problem | Evaporator fan operation, iced-over evaporator, damper/diffuser |
| Both sections warm, lights on | Cooling not running | Control settings, compressor start, condenser airflow |
| Frost buildup, weak airflow | Defrost problem | Defrost heater circuit, defrost thermostat/bi-metal |
| No ice and no water, warm temps | Water supply issue plus warm cabinet | Power stability first, then inlet valve and water line |
If you suspect a defrost failure with heavy frost on the back freezer panel, the defrost thermostat (bi-metal) is a common fix on this platform; see refrigerator defrost bi-metal WPW10225581.
A refrigerator that is not cooling can spoil food quickly. Power interruptions (including GFCI trips) and controls set to OFF are the fastest fixes; airflow and defrost problems are the next most common causes in side-by-side designs.
Last updated: February 2026
What is the average lifespan of a Kenmore refrigerator?
Most Kenmore refrigerators last 10 to 15 years. For a Kenmore 10644329400 side-by-side refrigerator, regular maintenance (especially airflow and door sealing) and timely part replacement can push service life longer, while neglected coils, warm settings, and leaks shorten it.
A refrigerator’s lifespan is mainly driven by heat management, door sealing, and how hard the sealed system has to work.
- Condenser coil cleanliness (dirty coils raise compressor run time)
- Door gasket condition (air leaks cause temperature swings and frost)
- Room temperature and ventilation around the cabinet
- Ice maker and water system health (leaks and low flow create secondary problems)
- Defrost performance (heavy frost reduces cooling efficiency)
Use these habits to reduce wear on the compressor and fans.
- Vacuum and brush the condenser area regularly
- Keep freezer at about 0°F and fresh food at about 37°F
- Avoid overpacking; keep vents clear for airflow
- Confirm doors close fully; level the cabinet if doors drift open
- Replace the water filter on schedule to maintain flow and reduce valve strain
When these parts fail, the refrigerator often runs hotter, longer, or less efficiently.
| Symptom | Common system involved | Example part for this model |
|---|---|---|
| Warm temps, heavy frost | Defrost system | Refrigerator defrost bi-metal WPW10225581 |
| No ice or intermittent ice | Ice maker system | Whirlpool refrigerator ice maker assembly 2198597 |
| Slow water, dispenser issues | Filtration/water supply | Genuine Kenmore refrigerator water filter EDR3RXD1 |
A refrigerator that runs longer cycles to maintain temperature uses more energy and puts extra load on the compressor and evaporator fan. Preventive care keeps temperatures stable, protects food, and helps your Kenmore 10644329400 reach its full expected lifespan.
For model-specific care and operating guidance, follow the 10644329400 owner's manual.
Last updated: February 2026
What is the cubic foot of my Kenmore refrigerator model 10644329400?
Your Kenmore side-by-side refrigerator model 10644329400 is a 23 cu. ft. class refrigerator (about 23 cu. ft. total capacity). For the exact capacity listing used for your specific configuration, we recommend confirming it in the 10644329400 owner's manual.
Kenmore 106-series side-by-side refrigerators are commonly grouped by “model size” in the documentation. The installation information for this platform lists a 23' (654 L) size category, which corresponds to the 23 cu. ft. class.
| Capacity label | Approx. liters | What you should expect |
|---|---|---|
| 23 cu. ft. class | ~654 L | Standard full-size side-by-side storage |
| 25 cu. ft. class | ~694 L | Slightly larger cabinet and opening height |
Even within the same Kenmore model family, the published “total volume” can differ a bit based on features and interior configuration (ice maker, dispenser setup, shelving package). To confirm the exact spec for your unit:
- Check the specifications section in the 10644329400 owner's manual
- Use your complete model number and serial number from the label inside the fresh food compartment
- Match the “model size” category (23' vs 25') shown in the installation dimensions
Knowing the correct cubic footage helps when comparing replacement refrigerators, planning kitchen opening clearance, and choosing storage accessories (bins, shelves, and door components) that fit your Kenmore 10644329400 layout.
Last updated: February 2026
What is the er if code on a Kenmore refrigerator?
On Kenmore side-by-side refrigerator model 10644329400, an ER IF display points to an ice and airflow problem in the freezer and ice maker area. We treat it as an ice system cooling issue first; restoring proper freezer temperature and airflow typically clears the code.
ER IF shows up when the refrigerator detects the ice system is not cooling or moving air the way it should.
- Freezer temperature too warm for normal ice production
- Frost or ice blocking air passages near the ice maker
- Freezer door not sealing or door switch not being pressed
- Ice maker area airflow problem (fan, ducting, or obstruction)
- Water fill issues that lead to abnormal ice maker operation
Start with these no-parts steps before disassembly.
- Power reset: unplug (or turn off breaker) for 5 minutes, then restore power
- Confirm freezer is set cold enough; most side-by-side freezers run best near 0°F
- Make sure the freezer door closes fully and the gasket seals all the way around
- Remove the ice bin and clear any ice clumps blocking vents or the auger area
- Check for heavy frost on the freezer back wall (a sign of restricted airflow)
Use this as a practical decision guide.
| What you observe | Most likely direction | Next step |
|---|---|---|
| Freezer is warm and ice is soft | Cooling/airflow issue | Verify settings, clean condenser area, check for frost buildup |
| Heavy frost buildup in freezer | Defrost system issue | Inspect defrost components and airflow paths |
| Water dispenser works but ice maker struggles | Ice maker fill or ice maker issue | Check valve operation and ice maker function |
If your troubleshooting points to a specific failure, these model-compatible parts are commonly involved.
- For weak or inconsistent water fill to the ice maker: refrigerator inlet valve W10247725
- For heavy frost that can restrict airflow: refrigerator defrost bi-metal WPW10225581
- For an ice maker that will not cycle or harvest properly: refrigerator ice maker assembly 2198597
When airflow or temperature in the ice maker area is off, ice production drops and the refrigerator keeps flagging the condition to prevent ongoing poor performance.
For the control settings, operating checks, and any display messages specific to Kenmore 10644329400, use the 10644329400 owner's manual.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10644329400, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Use the complete model number and serial number from that label when ordering parts or scheduling service; see the 10644329400 owner's manual.
- Open the refrigerator (fresh food) door, not the freezer door
- Look along the inside side wall of the refrigerator compartment
- Check near the upper side wall first, then scan downward
- Use a flashlight if the label is hard to read
- Write down both the model number and serial number exactly as shown
The label includes two key identifiers. We recommend recording both so you can match parts and diagrams correctly.
| Item on label | What it’s used for |
|---|---|
| Model number (example: 10644329400) | Ensures parts fit your exact Kenmore refrigerator configuration |
| Serial number | Helps identify production details that can affect part variations |
Kenmore 106-series refrigerators often have multiple versions that look similar. Using the full model number from the inside-wall label helps prevent ordering the wrong water filter, ice maker, door switch, or dispenser parts.
If you are ordering common maintenance parts, match them to 10644329400 before you buy:
- Genuine Kenmore refrigerator water filter EDR3RXD1 (water and ice taste, flow rate)
- Whirlpool refrigerator ice maker assembly 2198597 (no ice, small cubes, slow production)
- Refrigerator freeer door switch W11457217 (interior lights, dispenser operation)
Last updated: February 2026
Which Kenmore refrigerators are made by Whirlpool?
Many Kenmore refrigerators made by Whirlpool use a model number prefix of 106. That means your Kenmore 10644329400 side-by-side refrigerator is in the Whirlpool-built family, and you should use the model number to match the correct parts and service information in the 10644329400 owner's manual.
Kenmore is a brand name; the manufacturer is commonly identified by the first three digits of the model number.
- 106: Whirlpool-built (common for many Kenmore refrigerators)
- 253: Often associated with Frigidaire/Electrolux-built Kenmore units
- 795: Often associated with LG-built Kenmore units
- Always match parts by the full model number, not just the prefix
Even within the same 3-digit prefix, Kenmore refrigerators can use different ice makers, water filters, controls, and door hardware. Using the complete model number helps ensure the right fit and connections.
| What you’re matching | Best identifier to use | Example for this unit |
|---|---|---|
| Manufacturer family | First 3 digits | 106 = Whirlpool-built family |
| Exact parts fit | Full model number | 10644329400 |
| Water filter replacement | Filter part ID and spec | Genuine Kenmore refrigerator water filter EDR3RXD1 |
Knowing the Whirlpool-built prefix helps you troubleshoot smarter and order compatible parts (like a water filter, ice maker assembly, or inlet valve) without guessing across different Kenmore design families.
Last updated: February 2026





