Installation guide
Owner’s manual
Error Codes
Does Whirlpool make gas ranges?
Yes. Whirlpool manufactures gas ranges, including standard-cleaning gas range models like the Whirlpool WFG505M0BS0. These ranges use gas for cooking and typically rely on an electronic ignition system, so proper electrical connection and grounding are important for normal operation (see the WFG505M0BS0 owner’s manual).
A gas range combines a gas cooktop and a gas oven in one appliance. On the WFG505M0BS0, the ignition and controls are electronic, so the range needs a correctly wired outlet.
- Gas is used for the burners and oven heat
- Electronic ignition lights the gas (no standing pilot)
- The outlet must be properly polarized
- The metal chassis must be grounded for the control panel to work
- A shut-off valve and secure gas connections are required
Use this as a practical baseline for Whirlpool gas ranges like the WFG505M0BS0.
| Item to check | What “good” looks like | Why it matters |
|---|---|---|
| Electrical outlet | Properly polarized, grounded | Ignition and controls operate correctly |
| Grounding | Chassis grounded | Keypads and control panel respond |
| Gas supply line | New, approved line; tight connections | Helps prevent leaks and unsafe operation |
| Shut-off valve | Installed and accessible | Lets you stop gas quickly for service |
Many customers expect a gas range to work “without power,” but modern Whirlpool gas ranges depend on electricity for ignition and the control panel. If the outlet is miswired or the chassis is not grounded, the burners or keypads may not operate as expected.
If you are diagnosing ignition or heating issues on a Whirlpool gas range, these model-matched parts are commonly involved:
- Range oven igniter W10918546 (ignites the oven burner)
- Range oven temperature sensor WPW10181986 (helps regulate oven temperature)
- Range gas control valve WP98014893 (controls gas flow)
Last updated: February 2026
How do you reset a Whirlpool gas oven?
To reset a Whirlpool gas oven like model WFG505M0BS0, we stop the current cooking function with OFF/CANCEL, then restore power if the control is unresponsive. This clears most temporary control glitches without disassembling the range; use the steps in the WFG505M0BS0 owner’s manual.
- Press OFF/CANCEL to stop any active bake, broil, or timed cycle.
- Wait 60 seconds to let the control return to time-of-day.
- If the display is frozen or buttons do not respond: unplug the range (or switch the breaker off).
- Wait 2 to 5 minutes, then restore power.
- Set the Clock again if needed.
- Test BAKE and press START promptly (the control cancels a selection if Start is not pressed soon).
A “reset” will not fix a no-heat condition caused by a failed ignition or gas supply issue. Use this checklist:
- Confirm the range is plugged into a grounded outlet and the breaker is on.
- Verify the gas shutoff valve is open.
- Start BAKE and check for ignition (you should hear/see the burner light within a short time).
- If the igniter glows but the burner will not light, the igniter can be weak; consider the range oven igniter W10918546.
- If the oven heats but temperatures seem off, the range oven temperature sensor WPW10181986 is a common suspect.
| Action | What it helps | What it won’t fix |
|---|---|---|
| OFF/CANCEL | Cancels a cooking mode and clears many keypad mistakes | Gas supply problems, failed igniter, failed valve |
| Power cycle (unplug/breaker) | Clears a locked-up control | Broken wiring, bad control board, burner issues |
Resetting correctly prevents unnecessary part replacement and helps you separate a simple control lockup from a real heating problem (ignition, sensor, or gas flow).
Last updated: February 2026
Why is my Whirlpool stove working but not the oven?
If your Whirlpool WFG505M0BS0 cooktop burners light but the oven will not heat, the most common causes are an oven ignition problem (hot-surface igniter not glowing hot enough), an oven control setting issue (Control Lock or control not set correctly), or a gas shutoff/regulator issue. Use the checks in the WFG505M0BS0 owner’s manual to narrow it down.
- Confirm the oven control is set correctly for Bake or Broil and you pressed Start.
- Check whether Control Lock is enabled; unlock it if needed.
- Verify the range has power (the oven control needs electricity even though it is a gas oven).
- Make sure the main or regulator gas shutoff valve is fully open.
- If this is the first use (or after a gas interruption), turn on a surface burner briefly to help purge air from the gas line.
On this model type, the oven uses a hot-surface igniter (glow bar). When you start Bake, the igniter should glow bright orange and then the burner should light.
| What you observe | What it usually means | What to do next |
|---|---|---|
| Igniter does not glow | No power to igniter, failed igniter, or control/wiring issue | Check power first; then inspect wiring; consider replacing the igniter |
| Igniter glows but burner never lights | Weak igniter (not drawing enough current) is most common | Replace the igniter |
| Burner lights, then cycles on and off with a muffled ticking | Normal temperature cycling | No repair needed |
- Range oven igniter W10918546: most common failure for no-heat or delayed ignition.
- Range oven temperature sensor WPW10181986: can cause incorrect temps or shutdowns if out of range.
- Range gas control valve WP98014893: less common, but can prevent oven gas flow.
An oven that will not ignite can leave gas unburned at the burner area or cause repeated ignition attempts. Restoring proper ignition (especially the igniter) helps the oven light reliably and heat evenly.
Last updated: February 2026
