Kenmore 10678202891 refrigerator Parts

Most top-freezer (top-mount) refrigerators weigh about 150 to 250 lb. Your Kenmore 10678202891 falls in that typical range; for moving and handling guidance specific to this model, use the owner's manual.

Typical refrigerator weight ranges

These ranges help you plan for moving straps, a dolly, and how many people you need.

• Top-freezer (top-mount): 150 to 250 lb
• Bottom-freezer: 200 to 350 lb
• Side-by-side: 250 to 400 lb
• French door: 300 to 450 lb

Moving and handling tips (important for heavy refrigerators)

We recommend following the model’s safe-moving practices to avoid floor damage and tipping.

• Empty food, remove bins and glass shelves, and secure doors
• Use an appliance dolly and straps; keep the unit upright
• Pull the refrigerator straight out; do not “walk” it side to side
• Protect flooring with a hardboard sheet or floor protector
• Allow extra clearance at the back if you have an ice maker water line

Quick planning table

What you’re planning	What to assume for a top-freezer refrigerator
People needed	2 adults for controlled moving (plus a dolly)
Dolly rating	300 lb or higher
Doorway and swing clearance	Measure cabinet opening and door swing before moving

Why it matters

Weight affects safety and logistics: the right dolly rating, enough help, and proper technique reduce the risk of injury, damaged flooring, and bent hinges or door alignment issues.

Last updated: February 2026

A top-mount refrigerator means the freezer compartment is on top and the fresh-food (refrigerator) compartment is below. Your Kenmore 10678202891 is a top-mount design, which is the classic layout shown in the owner's manual.

How to identify a top-mount layout

• Freezer door is the upper door
• Refrigerator door is the lower door
• Ice maker (if equipped) is typically located in the freezer section
• Cold air is produced at the evaporator and circulated to both sections
• Door alignment and closing are adjusted at the front rollers and hinges

Why this design matters

Top-mount refrigerators are popular because they balance freezer space and refrigerator space in a simple, reliable configuration. They also make common service tasks (like door alignment and leveling) straightforward, which helps maintain stable temperatures and good door sealing.

Common top-mount features and what you may notice

Feature	What you’ll see	Why it matters
Upper freezer	Frozen foods stored above	Keeps freezer items easy to access
Lower fresh-food section	Most daily items at eye level	Convenient for frequent use
Door leveling/tilt	Front rollers adjust	Helps doors close fully and seal
Defrost system	Periodic defrost cycle	Prevents frost buildup on the evaporator

Helpful tips for best performance

• Leave ventilation clearance around the cabinet (typically about 1/2 inch at the sides and top).
• If the doors do not close easily, adjust the front leveling screws to tilt the refrigerator slightly back.
• Keep door gaskets clean so the seal stays tight and temperatures stay consistent.
• If you have an ice maker, allow extra space behind the refrigerator for the water line connection.

Last updated: February 2026

On a Kenmore top-mount refrigerator like model 10678202891, the top compartment is the freezer compartment (often just called the freezer). It’s the section designed to hold frozen food and, on many models, it also supplies ice maker operation. See the 10678202891 owner's manual for your exact compartment features and airflow details.

What the freezer compartment does

• Maintains below-freezing temperatures for long-term food storage
• Sends cold air down to help cool the fresh food (refrigerator) section
• Houses freezer vents; blocking them can cause temperature and moisture problems
• Often contains the ice maker area (if equipped)

Freezer vs. refrigerator section (quick comparison)

Compartment	Typical location on this style	Primary purpose	Common items inside
Freezer compartment	Top	Freezing and ice production support	Ice bin, ice maker area, frozen foods
Refrigerator compartment	Bottom	Fresh food cooling	Shelves, crisper pan, thermostat control area

Why it matters

Knowing the correct compartment name helps when you’re following troubleshooting steps (like checking vents for airflow) or ordering the right replacement parts for your Kenmore 10678202891.

Last updated: February 2026

For Kenmore refrigerator model 10678202891, the correct water filter is the one specified for your exact filtration setup (interior filter housing vs. an inline filter on the water line). We recommend matching by your model’s filtration section in the 10678202891 owner's manual and the part number printed on your current cartridge.

How to identify the right filter for 10678202891

Use these quick checks to get an exact match before ordering:

• Confirm the model number 10678202891 from the rating label inside the fresh food compartment.
• Look for a filter head or cartridge housing inside the refrigerator (often in the upper corner or grille area).
• If you already have a cartridge installed, read the part number printed on the filter.
• If water flow is weak, remove the cartridge and test dispenser flow; a noticeable increase points to a restricted filter.
• If your home uses an inline filter, identify the inline filter size and fittings on the water line.

What the manual says about filter-related symptoms

The manual’s troubleshooting guidance ties several common issues directly to the water filter:

Symptom	Common filter-related cause	What to do first
Low water flow at dispenser	Filter is full or installed incorrectly	Remove/reseat filter; replace if flow improves
Ice maker not producing enough ice	Restricted filter reducing fill	Replace filter; allow up to 24 hours for recovery
Dripping after dispensing	Air in lines after filter change	Flush water; normal use clears air in 24 to 72 hours
Grey/dark ice	Filter system needs additional flushing	Flush 2 to 3 gallons (8 to 12 L) and discard ice

Why it matters

Using the correct filter keeps water flow steady for the dispenser and ice maker, and it prevents nuisance problems like slow fill, off-taste ice, and dripping caused by air trapped after a filter change.

Related parts that affect water and ice performance

If you still have weak flow or no ice after confirming the correct filter and flushing the system, these model-compatible parts are commonly involved:

• Refrigerator inlet valve WP2315576 (controls water supply into the refrigerator)
• Refrigerator water tube W10823511 (can kink or restrict flow)
• Ice maker assembly 4317943 (if the ice maker itself is failing)

Last updated: February 2026