Kenmore 10656824604 side-by-side refrigerator Parts

The exact cubic-foot capacity for Kenmore side-by-side refrigerator model 10656824604 is listed on the model’s rating label and in the specifications section of the 10656824604 owner's manual. Use those two sources to get the precise number for your unit, since capacity can vary by configuration.

Where to find the exact capacity

Check these spots first (fastest to most detailed):

• Owner’s manual specs: look for “capacity” or “cubic feet” in the specifications section.
• Model and serial label: typically inside the fresh food compartment on a side wall or near the crisper area.
• Product literature section: sometimes listed with electrical and water supply requirements.
• If the label is worn: use the full model number 10656824604 when searching your documentation.

Typical capacity range (helpful for planning)

If you are estimating for kitchen planning or food storage, most Kenmore side-by-side refrigerators of this style commonly fall in this range:

What you need	Typical range for side-by-side refrigerators	Best source for your exact number
Total capacity	20 to 26 cu. ft.	10656824604 owner's manual
Fresh food share	About 60% to 70% of total	Rating label inside refrigerator
Freezer share	About 30% to 40% of total	Rating label inside refrigerator

Why it matters

Capacity affects how you shop for replacement shelves and bins, plan food storage, and compare performance expectations. It also helps when choosing accessories like a refrigerator water filter.

Related part and maintenance tip

If you are also checking specs because of water or ice performance, confirm your filter type and replacement interval in the manual. This model uses a base grille water filter; a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: January 2026

The most common issues we see with the Kenmore 10656824604 side-by-side refrigerator involve cooling performance, ice and water dispensing, and door sealing or closing problems. These symptoms usually trace back to airflow (evaporator fan), defrost components, water supply parts, or worn door hardware; use the 10656824604 owner's manual to match symptoms to checks.

Common problems and what they usually point to

• Not cooling well or warm freezer/fridge: restricted airflow, failed evaporator fan motor, dirty condenser area, or control issues
• Frost buildup on the back wall or evaporator cover: defrost system problem (defrost thermostat, heater circuit, or timer/control)
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker module failure, or freezer temperature too warm
• Water dispenser slow or not dispensing: clogged filter, frozen reservoir/tube, or inlet valve issue
• Door not closing, popping, or leaking air: worn door cam, gasket not sealing, bins interfering with closure

Quick checks we recommend first

1. Confirm temps: 0°F in the freezer and 37°F in the fresh food section.
2. Listen for the evaporator fan: it should run with the doors closed (door switch engaged).
3. Check for heavy frost: indicates a defrost problem.
4. Inspect the water filter and flow: replace on schedule and purge air after changes.
5. Look for door seal gaps: paper-strip test around the gasket.

Parts commonly involved on this model

Symptom	Common part to check	Example part on this model
No ice or no water	Water supply control	Refrigerator inlet valve W10822681
Slow water flow	Filter restriction	Genuine Kenmore refrigerator water filter EDR3RXD1
Frost buildup	Defrost sensing	Refrigerator defrost bi-metal thermostat WPW10225581
Warm temps, poor airflow	Evaporator airflow	Refrigerator evaporator fan motor WP2315549
Door not closing smoothly	Door hinge/cam wear	Refrigerator door cam (black) WP2182179

Why it matters

Catching airflow, defrost, and water-supply problems early helps protect food, prevents ice buildup that blocks circulation, and reduces strain on the compressor and controls.

Last updated: March 2026

A Kenmore side-by-side refrigerator like model 10656824604 typically lasts 13 years. You can often reach or exceed that lifespan by keeping airflow clear, maintaining door seals, and staying on schedule with basic upkeep listed in the owner's manual.

Typical lifespan and what affects it

Most lifespan differences come from usage and maintenance, not the brand badge.

• Dirty condenser area makes the compressor work harder
• Warm kitchen or tight cabinet clearance increases run time
• Worn door gaskets cause temperature swings and frost
• Ice maker and dispenser use adds wear to valves and motors
• Skipped water filter changes can reduce water flow and strain the inlet valve

Maintenance schedule that supports full lifespan

Task	Good interval	Why it matters
Replace water filter	Every 6 months	Protects water flow and taste; reduces restriction
Clean condenser area	Every 6 to 12 months	Lowers heat load; helps efficient cooling
Check door seal for gaps	Every 3 months	Prevents warm air leaks and frost
Verify temps	Monthly	Keeps food safe and reduces overwork

If you use a filter in this model, the genuine Kenmore refrigerator water filter EDR3RXD1 is a common replacement.

Signs your refrigerator is nearing end-of-life

These symptoms usually mean a major sealed-system or control issue is developing:

• Runs constantly but temperatures still rise
• Loud clicking and repeated start attempts (start device or compressor strain)
• Heavy frost buildup that returns quickly after defrosting
• Water leaks that persist after clearing the drain
• Cooling is uneven between fresh food and freezer sections

Why it matters

Knowing the expected 13-year lifespan helps you decide whether to repair (for example, a fan motor, inlet valve, or thermostat) or plan for replacement when major components like the compressor or evaporator are involved.

Last updated: March 2026