Kenmore 58715264900 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58715264900, as long as the part is still being manufactured and available. The key is matching the exact model number to the correct OEM part, then choosing the right assembly (pump, heater, inlet valve, seals) for the symptom.

How to make sure you order the right part

Use the model number 58715264900 and confirm the part location and description in the diagrams and lists in the 58715264900 owner's manual.

• Match your model number exactly: 58715264900
• Identify the failure symptom first (leak, no drain, no heat, poor cleaning)
• Check for common wear items: door seals, hoses, rollers, gaskets
• Compare the part name and ID before ordering
• Replace seals and O-rings when you open the sump or pump area

Common parts customers replace on this model

These are frequently purchased items for Kenmore dishwashers like 58715264900:

Symptom	Likely part to check	Example part for this model
Water leaking at the door	Door seal	Dishwasher door seal 809006501
Not draining or draining slowly	Drain hose, pump	Drain hose 807117001
Not filling or fills slowly	Water inlet valve	Dishwasher water inlet valve 154637401
Dishes not drying, water not heating	Heater	Heater 154825001

Why it matters

Kenmore dishwashers are built to be serviceable, and many issues are solved by replacing a single failed component. Using the correct model number and verifying the exact part ID helps prevent returns, repeat repairs, and leaks after reassembly.

Last updated: February 2026

Your Kenmore dishwasher model number is printed on the model and serial number label inside the door area. For Kenmore model 58715264900, the manual shows the serial label is located on the right side of the tub; open the door and look along the right tub wall and inner frame for the label. See the 58715264900 owner's manual.

Where to look first (fastest checks)

• Open the door and inspect the right tub wall for the model and serial label.
• Check the inner door frame around the opening (top and sides).
• Look along the top edge of the door (near the latch area).
• Scan the lower edge of the inner door panel.
• Wipe the area with a damp cloth; soap film can hide the print.

What the model number looks like

Kenmore dishwasher model numbers are typically a long number string. For this unit, the model format shown in the manual is 587.1526* (the asterisk represents a color number), and your full model on the label will match the complete number used for parts lookup (example: 58715264900).

What you see on the label	What it means	How to use it
Model number	Identifies the exact dishwasher version	Use it to match parts like a door seal, heater, or pump
Serial number	Identifies the production unit	Helpful for service history and support
“587.1526*” style	Model family plus color code	Use the full model number for ordering parts

Why it matters for parts and troubleshooting

Using the exact model number prevents mismatches in fit and wiring, especially for common dishwasher repairs like leaks (door gasket), no-heat drying (heater), or drain problems (drain hose). The model number also helps you interpret control behavior and features listed in the manual.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 58715264900 is usually worth it when the problem is a wear item, a leak, or a performance issue you can correct with cleaning or a targeted part replacement. It becomes less cost-effective when multiple major components fail at once.

Quick way to decide

We use three checks to make a clear repair vs. replace call:

• Age: Under 10 years old typically favors repair; over 10 years depends on condition and repair scope.
• Repair type: Leaks, draining issues, and poor cleaning are often straightforward; repeated electrical failures are more involved.
• Total cost: If the repair approaches 50% of the cost of a comparable new dishwasher, replacement usually makes more sense.

Common repairs that are often worth it on 58715264900

These are frequent, fixable issues on dishwashers of this design (filtering system, spray arms, heater, and drain path):

• Water not filling or filling slowly: check the dishwasher water inlet valve 154637401
• Not draining or draining poorly: inspect the drain hose 807117001 and the sink/disposer connection
• Leaks at the door: replace the dishwasher door seal 809006501
• Dishes not drying well: confirm you are using Heat Dry and that the heater circuit is working
• Food soils left on dishes: correct loading, water temperature, and spray arm blockage per the 58715264900 owner's manual

Repair vs. replace comparison

Situation	Usually do this	Why
Single leak (door or hose)	Repair	Low parts cost, high success rate
Won’t drain but motor sounds normal	Repair	Often a hose, blockage, or pump-area issue
Poor cleaning and cool water	Repair	Water temp and heater-related fixes are common
Multiple major failures (pump, control, leaks)	Replace	Cost and downtime add up

Why it matters

This model’s wash system relies on proper water temperature, correct loading, and unobstructed spray arms to clean well. When those basics are off, it can look like a “bad dishwasher” even though a simple adjustment or a single part restores performance.

What we recommend before spending on parts

• Verify incoming water is about 120°F and household water pressure is 20 to 120 psi
• Make sure items are not blocking spray arms
• Use fresh detergent and proper cycle selection
• Review the troubleshooting section in the 58715264900 owner's manual

Last updated: February 2026

Your Kenmore 58715264900 dishwasher is built around a wash system that filters and recirculates water for cleaning; the core parts include the racks, spray arms, filters, pump and motor, heater, detergent dispenser, door seals, and the water inlet and drain components. For diagrams and part locations, use the 58715264900 owner's manual.

Main parts you will see and use

• Racks and rollers: upper and lower racks ride on rollers for loading dishes
• Spray arms: lower and upper spray arms distribute wash water
• Detergent dispenser: releases detergent at the right time in the cycle
• Filters and glass trap: fine mesh filtering plus a center glass trap for debris
• Door system: door latch and door seals keep water inside the tub
• Controls: control panel and electronic control board run cycles and options

Wash and drain parts (what makes it clean and empty)

The 58715264900 wash system brings in hot water, mixes it with detergent, pumps it through the spray arms, then filters and recirculates the water; soils collect until they flush out during the drain cycle.

Function	What it includes	Common symptom when it fails
Fill	Water inlet valve	Won’t fill, fills slowly, or stops mid-cycle
Wash/recirculate	Pump and motor, spray arms, filters	Poor cleaning, weak spray, gritty residue
Heat/dry	Heater	Water not heating, poor drying
Drain	Drain hose and drain path	Standing water, slow drain

Parts on this model that customers replace often

These are examples of model-matched parts for the Kenmore 58715264900:

• Dishwasher water inlet valve 154637401 (fill problems)
• Drain hose 807117001 (leaks or drain routing issues)
• Heater 154825001 (heating and drying performance)
• Pump A00126401 (circulation or noise issues)
• Dishwasher door seal 809006501 (door-edge leaks)

Why it matters

Knowing which part does what helps you troubleshoot faster; for example, poor cleaning usually points to spray arms, filters, or the pump, while standing water points to the drain path and hose. For cycle options and care steps (including the glass trap and overfill protector), follow the 58715264900 owner's manual.

Last updated: February 2026