Kenmore 25370412415 refrigerator Parts

Yes. We still support Kenmore refrigerator parts, and for model 25370412415 you can order common replacement items like door gaskets, sensors, fan parts, and control boards that match this refrigerator’s configuration. Use your model number to ensure the part fits before you buy.

The most reliable way to get the correct OEM replacement is to match by model number 25370412415 first, then confirm the part name and identifier.

• Find the model/serial tag inside the fresh food section (often on a side wall or ceiling)
• Match the full model number exactly: 25370412415
• Compare the part description to your symptom (cooling, sealing, water, ice)
• Verify color and door position for cosmetic parts (left vs right door)
• Use the diagrams and part lists in the 25370412415 owner's manual

These are examples of parts available for Kenmore 25370412415 that commonly solve everyday issues:

• Odors in fresh food section: refrigerator door air filter EAFCBF
• Warm refrigerator or noisy airflow: refrigerator evaporator fan blade 5308000010
• Frost buildup or defrost problems: refrigerator defrost bi-metal thermostat 5304521781
• Temperature swings: refrigerator temperature sensor 240597220
• Door not sealing, moisture, or warm spots: refrigerator door gasket 5304537408

Using the correct part for 25370412415 prevents fit issues, repeat failures, and air leaks that make the compressor run longer and waste energy. The installation steps and final checks in the installation guide also help confirm doors and gaskets seal properly after any repair.

Last updated: February 2026

For Kenmore model 25370412415, contact Sears PartsDirect support for product help, troubleshooting guidance, and ordering the correct replacement parts. For model-specific operating and care details, use the 25370412415 owner's manual.

Use the option below when your goal is parts help, repair guidance, or general product questions.

• Contact Sears PartsDirect support for assistance
• Have your model number: 25370412415 ready
• Write down the serial number from the refrigerator’s rating label
• Describe the issue clearly (cooling, ice maker, water dispenser, door sealing)
• If you need parts, note the part name and location from the diagrams

Having these details speeds up troubleshooting and helps confirm you’re ordering the right part.

Using the correct model number and documentation helps ensure you get accurate troubleshooting steps and the right Kenmore refrigerator parts for a proper fit.

Last updated: March 2026

Your Kenmore refrigerator’s model number is printed on the serial plate inside the fresh food (refrigerator) compartment. For Kenmore model 25370412415, the Use & Care Guide notes this plate is located inside the refrigerator compartment; once you find it, copy the full model number exactly.

• Inside the refrigerator compartment on an interior side wall (look for a serial plate sticker)
• Near the crisper drawer area (check the wall behind or beside the drawers)
• Along the door frame when the door is open
• If you have a bottom freezer drawer, check the cabinet walls just above the drawer opening
• If needed, remove items and use a flashlight to read the label clearly

Most Kenmore refrigerators use a manufacturer label that includes:

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the label before you start a repair
• Match parts by model number first, then confirm by part name and location
• Use the manual to confirm component locations and access steps (especially for door removal)

Kenmore model numbers can look similar, but parts like a refrigerator door gasket, control boards, and door assemblies vary by model. Using the exact model number ensures the right fit, correct mounting points, and proper sealing and cooling performance.

For label location details and model-specific guidance, use the 25370412415 owner’s manual.

Last updated: February 2026

On Kenmore refrigerator model 25370412415, there is no separate “temperature sensor reset” button; the practical reset is to power-cycle the control so it rereads the temperature sensors and returns to normal operation. Unplug the refrigerator for 2 to 3 minutes, then plug it back in and allow temperatures to stabilize.

• Unplug the refrigerator from the wall outlet (the Power on-off icon does not remove power).
• Wait 2 to 3 minutes.
• Plug it back in.
• Set fresh food and freezer temps back to your preferred settings.
• Give the unit 24 hours to fully stabilize after any control reset or temperature change.

Use the control feature that resets settings:

• On the IQ-Touch style panel, use default settings to return temperature, display units, and tones to factory defaults (see the 25370412415 owner's manual).

A recurring warm temperature, erratic readings, or alarms usually points to a cooling or sensing issue, not a setting. Check these common causes first:

• Doors not sealing; inspect the gasket for gaps or tears
• Overpacked shelves blocking air vents
• Frost buildup restricting airflow
• Evaporator fan not running (no airflow in the fresh food section)
• A failing sensor such as the refrigerator temperature sensor 240597220

The temperature sensor feeds the control board the information it uses to run the compressor and fans. Resetting clears a temporary control glitch, but consistent temperature swings typically mean an airflow, defrost, or sensor problem that needs correction.

Last updated: February 2026

On Kenmore refrigerator model 25370412415, a bad compressor is most likely when the unit cannot maintain safe temperatures even though the condenser area has good airflow and the refrigerator keeps trying to run. First rule out normal long run times from hot rooms, frequent door openings, or a door not sealing.

• Confirm the refrigerator is plugged in firmly and the breaker is not tripping.
• Make sure the toe grille is not blocked; airflow is required for proper operation.
• Check that doors close fully and the gasket seals all the way around.
• Verify controls are set correctly (not set too warm in the freezer section).
• Allow time for normal defrost; many refrigerators pause cooling during defrost cycles.

A compressor issue usually shows up as a cooling failure, overheating, or repeated start attempts.

Before replacing a compressor, we look for common airflow and temperature-sensing issues that cause long run times or poor cooling:

• Door seal leak: warm air infiltration forces nonstop running; see refrigerator door gasket 5304537408.
• Condenser fan not moving air: poor heat removal can cause overheating; see refrigerator condenser fan motor 242018301.
• Temperature feedback problems: incorrect sensor readings can affect run behavior; see refrigerator temperature sensor 240597220.

A compressor replacement is a high-cost repair and typically requires sealed-system tools and refrigerant handling. Ruling out door sealing, airflow, and control/sensor issues first prevents unnecessary parts and restores normal cooling faster.

For model-specific operating expectations and “normal sounds,” use the 25370412415 owner’s manual.

Last updated: February 2026

On Kenmore refrigerator model 25370412415, a bad evaporator fan usually shows up as weak or no airflow from the freezer vents, warmer-than-normal fresh food temperatures, and abnormal fan noise (or no fan sound at all) when the compressor is running. Confirm by checking the fan motor for free rotation and electrical continuity per the 25370412415 owner's manual.

• Freezer is cold but fresh food section is warm (poor air circulation)
• Little to no airflow felt at the vents
• Loud buzzing, grinding, or rattling from the freezer area
• Fan runs intermittently, then stops
• Frost buildup on the evaporator cover (air cannot move well)

1. Unplug the refrigerator before touching any internal components.
2. Open the freezer and listen: when the unit is cooling, you normally hear air moving from the evaporator fan.
3. Inspect for ice blocking the fan or the air passages; heavy frost can mimic a bad fan.
4. Spin the fan blade by hand (power off): it should turn smoothly without scraping.
5. If the blade is damaged or wobbling, replace the fan blade; for this model, see refrigerator evaporator fan blade 5308000010.

Use a multimeter with the refrigerator unplugged.

• No continuity through the fan motor windings: the evaporator fan motor is failed and should be replaced.
• Continuity present but fan does not run: check for ice obstruction, wiring issues, or a control problem.

The evaporator fan is what pushes cold air from the evaporator through the freezer and into the fresh food section. When it fails, temperatures become uneven and the refrigerator can run longer than normal.

Last updated: February 2026

Yes, a 10-year-old Kenmore refrigerator like model 25370412415 is worth fixing when the problem is a wear item (door gasket, fan, sensor) and the total repair cost stays well below the cost of replacement. It is usually time to replace when sealed-system repairs (compressor or refrigerant work) are needed.

• If the fridge is cooling well after a simple fix (cleaning, leveling, gasket), repair it.
• If you see repeated warm temps, heavy frost, or long run times after basic maintenance, price out the repair before deciding.
• If the issue points to the sealed system (compressor, refrigerant restriction, leak), replacement is typically the better value.
• If doors do not close or seal, fix alignment or the gasket first because it directly affects performance.
• If you have water/ice features, factor in filter and leak prevention maintenance.

These are typical, cost-effective fixes that often restore performance:

• Replace a torn or warped door seal such as the refrigerator door gasket 5304537408.
• Address airflow problems (noisy or weak circulation) related to the evaporator fan blade.
• Replace a failed temperature sensor such as the refrigerator temperature sensor 240597220.
• Correct door sag or closing issues by checking the hinge and leveling.
• Replace the air filter to reduce odors and keep airflow paths cleaner.

Sealed-system work is expensive and labor-heavy:

Poor door sealing makes the refrigerator run longer and can cause temperature swings. The installation instructions note the cabinet should rest firmly on the floor and tilt slightly from front to back so doors close and seal properly; door alignment and leveling are key first steps. Use the installation guide for the correct leveling approach and tool sizes.

• Repair when the fix is a single part (gasket, sensor, fan) and the fridge has been reliable.
• Replace when the repair estimate approaches 50% of a comparable new refrigerator, or when the compressor/sealed system is involved.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 25370412415 are cooling issues (often airflow or defrost related), water leaks, ice maker or dispenser trouble, and unusual noises. Many of these start with simple checks like door sealing, coil cleaning, and verifying control settings in the 25370412415 owner's manual.

• Not cooling or warm temperatures: dirty condenser coils, blocked toe grille, evaporator fan problems, or heavy frost from a defrost issue.
• Runs too long: doors opened often, door not fully closed, controls set too cold, or hot room conditions.
• Water inside the fresh food section: high humidity, door slightly open, or normal moisture from produce in drawers.
• Water on the floor: defrost drain issues, loose water line connections, or door gasket leaks.
• Noises: normal operating sounds, fan blade rubbing ice, or a failing fan motor.

1. Confirm the refrigerator is level and tilted slightly back; the installation checklist calls out leveling and door sealing as final checks. See the 25370412415 installation guide.
2. Make sure doors and the freezer drawer gasket seal fully on all sides.
3. Verify the toe grille is not blocked so airflow can move across the condenser area.
4. Check temperature controls; the manual notes the unit may also pause during an automatic defrost cycle (about 30 minutes).
5. If you notice moisture, check for a door that is slightly open; humidity increases sweating and frost.

Most “big” refrigerator complaints trace back to airflow and sealing. When warm, humid air leaks in, the refrigerator runs longer, frost builds faster, and temperatures become unstable, which can lead to food spoilage and ice maker performance problems.

Last updated: February 2026

Most Kenmore refrigerators, including model 25370412415, last 10 to 15 years with normal household use. Reaching the high end depends on steady airflow, tight door sealing, and keeping the cooling system clean and unobstructed; our 25370412415 owner's manual covers the operating and care basics.

A refrigerator’s life is usually limited by the sealed cooling system, fans, and electronic controls. These factors most often shorten or extend service life:

• Dirty condenser area causing higher compressor run time
• Door gasket leaks that let warm, moist air in
• Poor airflow (blocked toe grille or packed-in installation)
• Heavy door use and frequent warm food loading
• Power issues (outlet controlled by a wall switch)

Use this checklist as a simple routine:

• Keep the toe grille area clear for airflow (important for proper operation)
• Confirm doors and freezer drawer seal fully all the way around
• Set stable temperatures and avoid frequent large adjustments
• Clean spills promptly to reduce odors and corrosion risk
• Replace worn sealing parts when you see gaps, tears, or persistent condensation

A refrigerator that runs hotter or leaks air works harder, which increases compressor run time and wear. Keeping airflow open and seals tight is the most direct way to protect cooling performance and extend lifespan.

Last updated: February 2026