KitchenAid KSRJ25FXMS03 refrigerator Parts

Yes. KitchenAid makes 33-inch-wide refrigerators, including 33-inch French door models. Your KitchenAid KSRJ25FXMS03 is a side-by-side refrigerator, so if you are shopping specifically for a 33-inch width, confirm the exact cabinet width and clearance requirements in the KSRJ25FXMS03 owner's manual.

Common 33-inch KitchenAid refrigerator types

KitchenAid has offered 33-inch width options in a few configurations; the most common is a standard-depth French door.

• French door (most common at 33-inch width)
• Top freezer (some lines and eras)
• Bottom freezer (select models)
• Side-by-side models are often wider than 33 inches, so always verify specs before buying

How to confirm a refrigerator is truly “33 inches wide”

Manufacturers list a nominal width, but your installation space needs extra room for doors, handles, and airflow.

• Measure the opening width at the front and back (walls are often not perfectly square)
• Check required side clearance for door swing and leveling
• Check top clearance for ventilation
• Confirm depth needs (standard depth vs counter depth)
• If replacing an existing unit, measure the old refrigerator’s cabinet width (not just the doors)

Quick measurement checklist

What to measure	What it affects	Typical tip
Opening width	Fit into the cutout	Measure in 3 spots (top/middle/bottom)
Door swing clearance	Ability to open drawers/doors	Allow extra space on hinge side
Depth to countertop	Protrusion into kitchen	Standard depth usually sticks out more
Height to cabinet	Leveling and airflow	Leave room to level and vent

Why it matters

A “33-inch” refrigerator that is even slightly wider (or needs extra clearance) can rub cabinets, limit door swing, and reduce airflow, which can hurt cooling performance and efficiency.

Last updated: February 2026

Most KitchenAid Superba side-by-side refrigerators are in the mid-20 cubic foot range; a common size is about 25.3 cu. ft. For your KitchenAid KSRJ25FXMS03, confirm the exact capacity on the model rating label or in the KSRJ25FXMS03 owner's manual.

How to confirm the exact cubic feet for KSRJ25FXMS03

Use these quick checks to get the precise number for your specific unit:

• Check the rating label inside the fresh food compartment (often on a side wall or ceiling area)
• Look for “Capacity” listed in cubic feet (cu. ft.)
• Compare the label info to the specifications section in the manual
• If you are measuring usable space, remember shelves and bins reduce practical storage volume

Typical capacity ranges (what “Superba” usually means)

KitchenAid Superba is a product line name, so capacity varies by model and configuration.

Refrigerator type	Typical capacity range
Side-by-side (like KSRJ25FXMS03)	22 to 26 cu. ft.
Top freezer	14 to 21 cu. ft.
French door	20 to 30 cu. ft.

Why it matters

Knowing cubic feet helps us match the right parts and maintenance items for your KitchenAid refrigerator, and it also helps when comparing storage needs, filter schedules, and airflow loading.

Related maintenance tip

If your KSRJ25FXMS03 has a water dispenser or ice maker, keeping filtration current helps protect water flow and taste; see how to replace the water filter in a KitchenAid refrigerator and match your filter to the correct part, such as the refrigerator water filter EDR3RXD1.

Last updated: February 2026

To estimate the age of your KitchenAid refrigerator model KSRJ25FXMS03, use the serial number date code and the year digits in the serial. On many KitchenAid-built units, the first three digits show the day of the year it was made, and the last two digits show the year.

Where to find the serial number

You will typically find the model and serial tag:

• Inside the fresh food compartment on a side wall
• Near the top interior frame by the door opening
• Sometimes behind the crisper drawers or on the ceiling liner

For location diagrams and label examples, check the KSRJ25FXMS03 owner's manual.

How to decode the build date (common KitchenAid format)

Many KitchenAid serial numbers can be read like this:

• Digits 1 to 3: day of the year (001 to 365)
• Last 2 digits: year (for example, 03 = 2003)
• A single “date code” letter may also appear early in the serial number (its position can vary by serial length)

Quick example

If your serial begins with 120 and ends with 03:

• Day 120 = the 120th day of the year
• Year 03 = 2003

That puts the build date around late April 2003.

Serial number length: what changes

KitchenAid serial numbers are commonly 9 or 10 characters long; the date-code letter position often differs.

Serial length	Where the date-code letter often appears	What to do
9 characters	2nd character	Use it with the year digits to confirm the year
10 characters	3rd character	Use it with the year digits to confirm the year

Why it matters

Knowing the manufacture date helps you choose the right repair approach for cooling, ice maker, or water dispenser issues, and it helps when ordering model-matched parts such as a refrigerator water filter EDR3RXD1.

Last updated: February 2026

For KitchenAid side-by-side refrigerators like model KSRJ25FXMS03, the most common issues we see are ice maker and water dispenser problems, warm temperature complaints caused by airflow/defrost trouble, and water leaks. These typically trace back to the water filter, water inlet valve, evaporator fan airflow, or a defrost drain restriction.

Most common symptoms (and what they usually point to)

• No ice or slow ice production: restricted water supply, clogged filter, or a weak inlet valve
• Water dispenser is slow or sputters: air in the line, clogged filter, or low house water pressure
• Refrigerator warm but freezer cold: evaporator airflow problem or defrost system issue
• Water under the refrigerator or in the fresh food section: defrost drain issue or water line leak
• Unusual buzzing or clicking: fan issues, valve noise during fill, or control-related cycling

Quick checks we recommend first

Start with the simplest, highest-impact checks before replacing parts:

• Confirm temperature settings and allow 24 hours after any adjustment
• Make sure vents inside both compartments are not blocked by food packages
• Replace the water filter if it is older than 6 months or flow is reduced
• Purge air from the dispenser after filter changes or water shutoffs
• Clean the condenser area to improve cooling efficiency

Common parts involved on KSRJ25FXMS03

Problem area	What fails most often	Example model-matched part
Water/ice	Clogged filter or weak valve	Refrigerator water filter EDR3RXD1, refrigerator water inlet valve WPW10179146
Cooling/airflow	Fan airflow restriction or fan-related noise	Refrigerator evaporator fan blade WP2169142
Frost buildup	Defrost heater or defrost thermostat	Refrigerator defrost heater WP2323198, refrigerator defrost bi-metal thermostat WPW10225581

Why it matters

These problems often overlap. For example, a restricted filter can cause slow dispensing and small ice cubes, while a defrost issue can make the refrigerator section warm even though the freezer still feels cold. Using the troubleshooting steps in the KSRJ25FXMS03 owner's manual helps you match the symptom to the right system before buying parts.

Last updated: February 2026

Most KitchenAid refrigerators, including the KitchenAid KSRJ25FXMS03 side-by-side, last about 14 to 17 years with normal household use. Regular maintenance (clean condenser coils, good door seals, and on-time filter changes) is what most often separates a shorter life from a longer one.

Typical lifespan and what affects it

A refrigerator’s life is mainly driven by compressor run time, heat removal, and how well the cabinet stays sealed.

• Typical KitchenAid lifespan: 14 to 17 years
• Common shorter-life causes: dirty condenser coil, restricted airflow, worn door gasket, frequent warm-air intrusion
• Common longer-life habits: stable temperatures, clean coils, tight seals, correct loading, timely water filter replacement

Maintenance checklist that extends life

Use these as your baseline for the KSRJ25FXMS03.

• Clean the condenser coil and surrounding area so the compressor runs cooler
• Keep door gaskets clean and sealing evenly; fix gaps quickly
• Replace the water filter on schedule to protect the water system and maintain flow
• Confirm the evaporator fan is moving air properly (freezer cooling drives fresh-food cooling)
• Keep vents inside the refrigerator and freezer clear of food packages

Quick guide: symptoms vs likely wear items

Symptom	What it often points to	Example part for this model
Warm refrigerator, freezer OK	Airflow issue or evaporator fan problem	Refrigerator evaporator fan blade WP2169142
Frost buildup, warming over time	Defrost system issue	Refrigerator defrost heater WP2323198
Water dispenser slow or tastes off	Filter restriction or overdue replacement	Refrigerator water filter EDR3RXD1
Water not dispensing, ice maker issues	Water supply or valve problem	Refrigerator water inlet valve WPW10179146

Why it matters

A side-by-side refrigerator like the KSRJ25FXMS03 depends on efficient heat removal and steady airflow. When coils are dirty or seals leak, the compressor and controls work harder, which shortens overall lifespan and increases temperature swings.

For model-specific care and cleaning intervals, follow the KSRJ25FXMS03 owner's manual.

Last updated: February 2026