Kenmore 10658023801 side-by-side refrigerator Parts

The Kenmore side-by-side refrigerator model 10658023801 is typically in the 21 to 22 cubic foot class. For the exact total capacity (and the fresh food vs. freezer split), use the specifications information in the 10658023801 owner's manual.

Typical capacity for this Kenmore 106 side-by-side platform

Most Kenmore 106-series side-by-side refrigerators are built in a mid-size footprint; total capacity commonly falls in this range:

• Total capacity: about 21 to 22 cu. ft.
• Fresh food section: usually the larger share of space
• Freezer section: full-height, narrower compartment
• Usable space: reduced by shelves, bins, and the ice system

Where to find the exact cubic feet for your unit

Use these quick checks to confirm the exact spec for your specific build:

• Look in the specifications section of the 10658023801 owner's manual
• Check the model and serial tag inside the fresh food compartment
• If your unit has an ice and water system, note that the ice bin and ducting affect usable space

Quick reference table

What you want to know	Where to confirm it
Total cubic feet	Specs section in the 10658023801 owner's manual
Refrigerator vs. freezer split	Specs section (often listed as separate volumes)
Usable storage vs. advertised volume	Compare shelf/bin layout to your needs

Why it matters

Cubic feet helps you compare refrigerators accurately and plan storage. It also helps when choosing accessories and maintenance items such as the correct water filter style used on many 106-series units (for example, genuine Kenmore refrigerator water filter EDR3RXD1).

Last updated: February 2026

Kenmore model numbers are read left to right; the first 3 digits identify the manufacturer (for example, 106 is a Whirlpool-built Kenmore), and the remaining digits identify the design series and specific feature variations. For your refrigerator, 10658023801 is the full model number to use for parts and manuals.

Where to find the model number on a side-by-side refrigerator

We typically see the model and serial tag in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the door frame (hinge side) when the door is open
• Behind the base grille or near the lower kickplate area
• On the back of the cabinet (less common for daily access)

For model-specific location details and labeling, check the 10658023801 owner's manual.

How to decode a Kenmore model number (quick guide)

Here is the basic structure we use when identifying parts:

Section	Example	What it tells you
Manufacturer prefix	106	Who built the Kenmore appliance (often Whirlpool for 106)
Series and design	58023	Product platform and configuration family
Variation digits	801	Feature and production variation

Why the full model number matters for parts

Using the complete model number prevents mismatches in common replacement parts such as:

• Refrigerator water filter and filter cap
• Ice maker assembly and ice container
• Water inlet valve and water tubing
• Evaporator fan motor and fan blade
• Electronic control and temperature control

Even small digit changes can affect fit, wiring connectors, and mounting points.

Related tip for this model

If you are ordering a water filter for Kenmore 10658023801, the manual lists the base grille filter as replacement filter part 9030; on our parts list, that corresponds to genuine Kenmore refrigerator water filter EDR3RXD1.

Why it matters

Correct model-number decoding saves time and avoids returns because it ties your Kenmore side-by-side refrigerator to the exact parts diagrams, troubleshooting steps, and compatible replacement parts.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 10658023801 are cooling problems, ice maker or dispenser failures, water leaks, noisy operation, and frost buildup. Many of these trace back to airflow restrictions, temperature settings, or worn water and ice components; start with the basics in the 10658023801 owner's manual.

Common problems and what to check first

• Not cooling or warm temperatures: confirm controls are not set to OFF and both sections are near the factory mid-settings.
• Frost buildup or poor airflow: make sure food packages are not blocking vents; blocked vents cause temperature and moisture problems.
• Ice maker not working: verify the freezer is cold enough, the shutoff arm is on, and the water supply is on.
• Ice dispenser stalls (especially crushed ice): switch from crushed to cubed and try again; if the dispenser arm is held too long, wait about 3 minutes for the motor to reset.
• Water dispenser slow or no water: replace the water filter and purge air from the line.
• Leaks: inspect the water line connections and valve area for drips.

Parts that commonly solve these symptoms

If troubleshooting points to a failed component, these are frequent replacements for this model:

Symptom	Common part to inspect/replace	What it does
No water at dispenser or ice maker	Refrigerator water inlet valve W10408179	Opens to supply water to dispenser and ice maker
Bad tasting water, slow flow	Genuine Kenmore refrigerator water filter EDR3RXD1	Filters drinking water and can restrict flow when clogged
No ice production	Refrigerator ice maker 2198597	Cycles to fill, freeze, and harvest ice
Frost on back wall, warming	Refrigerator defrost heater WP2323198	Melts frost off the evaporator during defrost
Warm fridge, noisy or no airflow	Refrigerator evaporator fan motor WP2315549	Moves cold air through freezer and into fresh food section

Why it matters

This side-by-side design relies on air circulation between the freezer and refrigerator compartments. When vents are blocked or a fan/defrost part fails, temperatures drift, moisture increases, and ice and water performance often suffers.

Quick prevention tips

• Keep vents clear in both compartments.
• Keep controls near mid-settings and adjust in small steps.
• Replace the water filter on schedule to maintain flow.
• Avoid holding the dispenser lever too long; let the motor reset if it stalls.

Last updated: February 2026

A Kenmore 10658023801 side-by-side refrigerator usually stops cooling because cold air is not being moved correctly (airflow problem) or the sealed system is not removing heat. Start with power and control checks, then inspect the evaporator area for frost buildup and fan operation using the 10658023801 owner's manual.

Most common causes (in order)

• Controls off or recent install: Controls may be set incorrectly; after installation, allow 24 hours to cool fully.
• Door left open or poor door seal: Warm air intrusion can overwhelm cooling.
• Evaporator fan not running: No airflow from freezer to fresh food section; often causes uneven temperatures.
• Heavy frost on evaporator coils: Defrost system issue blocks airflow.
• Weak water and ice related airflow issues: Ice buildup near vents can restrict circulation.
• Sealed system problem (compressor, refrigerant, restriction): Runs but does not cool well.

Quick checks we recommend before replacing parts

1. Confirm the outlet works and the cord is fully plugged in.
2. Verify both temperature controls are turned on and not set to “off.”
3. Listen for the evaporator fan (freezer) when the door switch is held closed.
4. Look for frost or a solid ice sheet on the freezer back wall.
5. Clean condenser coils and make sure airflow around the cabinet is not blocked.

What symptoms point to which part?

Symptom	Most likely area	Parts that commonly fix it
Freezer cold, fridge warm	Airflow/evaporator fan	Refrigerator evaporator fan motor WP2315549
Frosted freezer back panel, weak airflow	Defrost system	Refrigerator defrost heater WP2323198, refrigerator bi-metal thermostat WPW10225581
No cooling anywhere, lights on	Controls or sealed system	Refrigerator electronic control W11629974 (if diagnostics support it)

Why it matters

Cooling failures are often airflow-related; fixing a fan or defrost issue restores normal temperatures and prevents food spoilage. Checking the basics first also avoids replacing expensive parts when the real problem is a door left ajar or controls set incorrectly.

Last updated: February 2026

Most Kenmore refrigerators last 10 to 15 years. For a Kenmore side-by-side like model 10658023801, regular care (especially cleaning and airflow maintenance) and fixing small problems early are what most often determine whether it reaches the high end of that range.

Typical lifespan ranges (what we see most often)

Refrigerator type	Typical lifespan	What usually ends it first
Side-by-side (like 10658023801)	10 to 15 years	Sealed system wear, control issues, airflow problems
Top freezer	12 to 18 years	Thermostat/control, door seal leaks
French door	9 to 14 years	Ice maker and dispenser system, electronics

Maintenance that extends life the most

We recommend focusing on the items that reduce compressor run time and prevent moisture and ice buildup:

• Clean condenser coils (dust buildup makes the compressor work harder)
• Keep door gaskets sealing (warm air leaks cause frost and long run times)
• Maintain good airflow (do not block vents with food packages)
• Replace water filters on schedule to protect the water system and ice maker
• Address unusual noises early (fan motors and ice maker issues often start small)

For model-specific care and cleaning intervals, follow the 10658023801 owner's manual.

Quick “is it worth repairing?” checklist

Use this as a practical decision guide:

• Under 8 years old: repairs are usually worth it unless it is a sealed system failure
• 8 to 12 years old: worth repairing if cooling is strong and the cabinet is in good shape
• Over 12 to 15 years old: prioritize low-cost fixes (gaskets, fans, ice maker) over major cooling-system work

Common repairs on this model family

Symptom	Common cause	Example part you may need
No ice or slow ice	Ice maker or water supply issue	Refrigerator ice maker 2198597
No water at dispenser	Water inlet valve not opening	Refrigerator water inlet valve W10408179
Frost buildup, warm temps	Defrost system problem	Refrigerator defrost heater WP2323198

Why it matters

A refrigerator that runs longer and hotter than normal wears out the compressor and electronics faster. Simple upkeep (cleaning, sealing, filter changes) reduces run time, stabilizes temperatures, and helps your Kenmore 10658023801 reach its full service life.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10658023801, the model number is printed on the appliance identification label inside the refrigerator compartment. We use that model number to match the correct parts, diagrams, and troubleshooting steps for your exact unit.

Most common places to check

Look for a paper or foil label (often with both model and serial information) in one of these spots:

• Inside the fresh food section on a side wall near the top
• On the ceiling of the fresh food compartment near the light housing
• On the frame around the fresh food door opening (hinge side)
• Behind the base grille or toe grille area (less common)
• On the back exterior panel (least common)

For model-specific label location illustrations and safety notes, use the 10658023801 owner's manual.

What the label usually looks like

The label typically lists both identifiers together. Use the model number (not just the serial) when ordering parts.

Item on label	What it’s used for	Example format
Model number	Parts lookup and diagrams	10658023801
Serial number	Manufacturing info and service history	Letters plus numbers

Why it matters

Kenmore model numbers can be very similar across side-by-side refrigerators. Using the exact model number (like 10658023801) prevents ordering the wrong water filter, ice maker, door gasket, or electronic control.

Quick tip before you order parts

• Write down the full model number exactly as shown
• Take a clear photo of the label for reference
• If you are replacing a filter, confirm the filter style shown in the manual and match it to the correct part (for this model, a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1)

Last updated: February 2026