Kenmore 10672152110 refrigerator Parts

The Kenmore top-mount refrigerator model 10672152110 has an approximate total capacity of 21.9 cubic feet. For the exact capacity listing tied to your unit’s configuration and labels, we recommend confirming it in the 10672152110 owner's manual.

Quick capacity details

• Total capacity: 21.9 cu. ft. (overall refrigerator plus freezer)
• Capacity is a volume rating, not the same as exterior dimensions
• Usable space can vary with shelves, ice maker, and bins installed
• A top-mount design typically splits space between fresh food and freezer compartments

What can change the usable space?

Even when the rated cubic feet stays the same, these items can reduce usable storage room:

• Installed ice maker assembly such as refrigerator ice maker 4317943
• Door bins and shelf positions
• Large crisper drawers and deli pans
• Airflow channels (do not block vents)
• Frost buildup from a defrost problem

Capacity term	What it means	What you’ll notice day to day
Total capacity (cu. ft.)	Overall interior volume	Helps compare models by size
Usable space	Space you can actually load	Changes with accessories and layout
Freezer vs fresh food split	How the total is divided	Affects how much frozen food fits

Why it matters

Knowing the cubic feet helps when you are comparing replacement refrigerators, planning kitchen space, or deciding whether add-ons (like an ice maker) will take away storage you need.

Last updated: February 2026

Kenmore model numbers are read left to right; the first 3 digits identify the manufacturer source, and the remaining digits narrow down the exact design and feature set. For your Kenmore refrigerator model 10672152110, the 106 prefix is the key identifier we use to match the correct parts and service information in the 10672152110 owner's manual.

Where to find the model number on a Kenmore top-mount refrigerator

Check these common locations first:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the frame around the door opening (hinge side)
• Behind the toe grille (lower front kick plate)
• On the back of the cabinet

How to break down a Kenmore model number

Most Kenmore model numbers follow this pattern.

Section	Example	What it tells us
Prefix (first 3 digits)	106	Manufacturer source code used for parts lookup
Middle digits	72152	Base design series (platform)
Ending digits	110	Version, color, feature, or production variation

Tips to make sure you capture the right number

Using the full model number prevents ordering the wrong refrigerator parts (like a control board, ice maker, or door gasket).

• Write down the entire model number, including any trailing digits
• Take a clear photo of the model/serial tag before ordering parts
• Use the model number (not the serial number) for parts lookup
• If the tag is worn, look for a second tag behind the toe grille
• Match the model number exactly when referencing diagrams and procedures in the manual

Why it matters

Kenmore used different manufacturers and designs across the same product type. The prefix (like 106) quickly narrows the correct parts system, which is especially important for fit-critical items such as a door gasket, ice maker, or electronic control board.

Last updated: February 2026

For Kenmore model 10672152110, the most reliable way to get cubic feet is to read the capacity listed on the refrigerator’s rating plate (inside the fresh food section) or in the specs section of the 10672152110 owner's manual. Model numbers can hint at size, but they are not a consistent capacity code.

Fast ways to find the cubic feet (best to least)

• Check the rating plate: Look on the inside wall of the refrigerator compartment (often near the crisper area or side wall). Capacity is commonly listed as “cu. ft.”
• Use the manual specs: The owner’s manual typically lists total capacity and sometimes breaks it into refrigerator and freezer capacity.
• Measure and estimate (backup method): If the label is missing or unreadable, you can estimate interior volume by measuring usable interior space.
• Compare by style: Top-mount (top freezer) refrigerators like this Kenmore are commonly in the 14 to 22 cu. ft. range.

How to estimate cubic feet if you cannot find it listed

1. Measure the usable interior (not the outside cabinet): width x depth x height in inches.
2. Multiply to get cubic inches.
3. Convert to cubic feet.

What you have	What to do	Formula
Interior measurements in inches	Multiply for cubic inches	W x D x H
Cubic inches	Convert to cubic feet	(W x D x H) / 1728

Why it matters

Cubic feet affects how much food you can store and helps you choose compatible accessories (bins, shelves) and set expectations for cooling recovery time after door openings.

Last updated: February 2026

On a Kenmore 10672152110 top-mount refrigerator, the top section is typically called the freezer compartment (or simply the freezer). It’s the coldest area of the appliance and is designed to keep foods frozen; it may also house the ice maker on equipped models.

Common names you’ll see

• Freezer compartment
• Freezer section
• Freezer cabinet (less common)
• Freezer door (refers to the door, not the compartment)
• Top-mount freezer (describes the refrigerator style)

What’s usually located in the top (freezer) section

Depending on the exact configuration of your Kenmore 10672152110, the freezer area commonly includes:

• Freezer shelves or wire rack(s)
• Ice bin and ice chute (if equipped)
• Evaporator cover (rear interior panel)
• Air vents that send cold air down to the fresh food section
• Temperature control housing (location varies by design)

If your unit has an automatic ice maker, the assembly is typically mounted in the freezer: refrigerator ice maker 4317943.

Quick reference: “top part” vs. “top components”

If you mean…	Common term	Where it is
The whole upper compartment	Freezer compartment	Inside the top door
The door itself	Freezer door	Front, upper door
The cooling parts that move cold air	Evaporator fan area	Behind the rear freezer panel

For diagrams and the exact naming used for your model, check the 10672152110 owner's manual.

Why it matters

Using the correct term (freezer compartment vs. freezer door vs. evaporator fan area) helps us match the right Kenmore refrigerator parts faster, especially for issues like warm temperatures, frost buildup, or ice maker problems.

Last updated: February 2026

For Kenmore model 10672152110, the correct water filter is the one specified for that exact model; Kenmore uses multiple filter styles across different manufacturers, so the model number is the only reliable match point. Use the filter section in the 10672152110 owner's manual to confirm the exact replacement.

How to identify the right filter on your refrigerator

We match the filter by where it installs and how it locks in, then confirm by model.

• Check the model tag inside the fresh food compartment (you already have 10672152110).
• Look for the filter location: inside the refrigerator (upper right), in the base grille, or inline behind the unit.
• Note the filter shape and connection: push-in, quarter-turn, or twist-lock.
• If your unit has an ice maker and water dispenser, confirm whether it uses a cartridge filter or an inline filter.
• Replace the filter if water flow is slow, ice is hollow, or taste and odor changes.

Quick fit guide (what you will see)

What you see on the fridge	Most likely filter style	What to do next
Cartridge in the ceiling or side wall	Internal cartridge filter	Confirm the exact filter number in the manual
Filter in the bottom grille	Base grille filter	Confirm the exact filter number in the manual
No filter inside, but tubing at the back	Inline filter (external)	Use the manual to confirm routing and filter type

If you are also troubleshooting low water flow or no ice

A “wrong filter” symptom can look like a water supply issue. Check these in order:

• Make sure the household shutoff valve is fully open.
• Verify the water line is not kinked behind the refrigerator.
• Replace an old or clogged filter.
• If the ice maker is not filling, test the refrigerator water inlet valve WPW10279909 for proper water flow.
• If the ice maker itself is not cycling, inspect the refrigerator ice maker 4317943.

Why it matters

Using the correct filter for 10672152110 prevents leaks, protects the water inlet valve, and keeps ice and drinking water tasting normal without restricting flow.

Last updated: February 2026